How to Hotwire a Haojue Motorcycle When the Key is Lost?

1 Answers
McLayla
07/30/25 10:31am
First, unscrew the four screws on the cover plate. Gently tap the large panel with your hand to separate it from the motorcycle. After removing the front large panel, locate the ignition switch and its connector. Unplug the ignition switch connector. Identify the red and black wires. Connect one end of a wire to the black wire and the other end to the red wire (ensure a secure connection). At this point, you can start the motorcycle. Remember not to plug the connector back in.
Was this review help?
3
0
Share
More Forum Discussions

Why Doesn't the Automatic Transmission Move When Shifting to Reverse and Accelerating?

First, check the condition of the two rear wheels. If both rear wheels are thrown out, it may be due to a broken axle sleeve or the wheel hub bearing lock nut coming loose. If everything appears normal, the issue should be diagnosed based on the behavior of the driveshaft when shifting gears and starting. Here are several scenarios related to the driveshaft: 1. If the driveshaft rotates but the car doesn't move, the problem lies in the rear axle: Jack up the rear axle and rotate one rear wheel. If the driveshaft doesn't turn and the other rear wheel rotates in reverse, it indicates that all the rivets of the driven bevel gear have sheared off. If the other rear wheel doesn't rotate either, the half-shaft should be inspected for breakage. 2. If the driveshaft doesn't rotate when the transmission is in a specific gear after starting, the issue is in the transmission: Remove the transmission cover and check if the shift fork is broken or if the guide block fixing screws have come loose. 3. If the driveshaft doesn't rotate in any gear, the problem is with the clutch: Check for severe clutch slippage, whether all the spline teeth rivets of the clutch driven disc hub and steel plate have sheared off, or if the steel plate is fractured.
8
0
Share

What are the reasons for an automatic car not moving when accelerating in D gear?

When an automatic transmission vehicle is in D gear and does not move, this situation can generally be attributed to the following scenarios: 1. Uneven road surface: There may be a slope in front of the car, obstacles or potholes in front of the tires, hindering the car's movement. The engine's idle speed is relatively low, and the corresponding power is weaker, insufficient to propel the car forward against the resistance. 2. Rusty brake discs: Brake discs are made of iron and can easily rust after rain or car washing, creating significant resistance. The car's power at idle speed cannot overcome this resistance. 3. Fault condition: If there is a transmission malfunction, it is advisable to visit a repair shop or a 4S store for a check-up, as the shift solenoid valve may be faulty. 4. Non-fault condition: Autohold (automatic parking) is a type of handbrake that hasn't been released. If the handbrake is not released, the car remains in a locked state and cannot move forward relying on the idle speed.
5
0
Share

What to Do If You Miss the First Maintenance for a New Car?

If a new car exceeds the first maintenance deadline, the owner can apply to the manufacturer through a 4S store. If the manufacturer agrees, the 4S store can continue the warranty service for the owner. Here is some extended information: 1. During each routine maintenance, the oil filter must be replaced. If driving primarily in non-dusty areas, the air filter can generally last up to 20,000 kilometers, requiring only cleaning at 7,500 kilometers. The lifespan of the fuel filter depends on the quality of fuel used. If consistently refueling at reputable gas stations without experiencing fuel supply issues, replacement can be considered after 20,000 kilometers. 2. Under normal usage conditions, brake pads can last 30,000-40,000 kilometers, and the original battery can last 3-4 years. Owners can adjust the usage periods of these components and fluids based on their vehicle's maintenance manual and actual driving conditions.
2
3
Share

What is the fuel consumption per 100 kilometers for a 1.0L displacement car?

A 1.0L displacement microcar consumes about six liters of fuel per 100 kilometers. The actual fuel consumption per 100 kilometers depends on various factors, including the car's condition, load, traffic conditions, and the driver's skills, among others. Therefore, the exact fuel consumption can only be determined by considering all these factors. Below are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance can lead to increased fan speed and lower temperature settings to achieve a cooling effect. 2. Avoid frequent sudden braking: Frequent sudden braking is a major reason for high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement cars: For cars exposed to the sun, avoid turning on the air conditioning immediately upon entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait for the car to cool down moderately before turning on the air conditioning.
7
0
Share

How many times does a 2007 vehicle need to be inspected per year?

1 inspection per year. For vehicles aged 6-15 years, the inspection is required once a year. The vehicle will only be mandatorily scrapped when the mileage reaches 600,000 kilometers. For vehicles over 15 years old, inspections are required twice a year. Newly registered small private passenger vehicles are exempt from on-site inspections for the first six years, but they still need to apply for annual inspection and environmental labels on time (once every two years within six years). Below are the relevant details about annual inspections: 1. For passenger vehicles used for commercial purposes, inspections are required once a year within the first 5 years; after 5 years, inspections are required every 6 months. 2. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first 10 years; after 10 years, inspections are required every 6 months. 3. For small and mini non-commercial passenger vehicles, inspections are required once every 2 years within the first 6 years; after 6 years, inspections are required once a year; after 15 years, inspections are required every 6 months. 4. Tractors and other motor vehicles require inspections once a year. Commercial motor vehicles that pass the safety technical inspection within the specified inspection period will not need to undergo repeated safety technical inspections.
6
1
Share

What does driving school clocking in mean?

Driving school clocking in refers to the "clock-in timing" regulation implemented for the driving test. It is mainly used to accumulate the hours of driving practice. Only after the accumulated hours meet the standard for each subject can the subject test be scheduled. The following is extended information on clocking-in precautions: 1. The daily clock-in time is limited to 2 hours. Time exceeding this limit will not be accumulated. 2. Clocking in cannot be done by others. Because the clock-in process is recorded by a camera and automatically uploaded to the vehicle management office for verification. A single clock-in of less than 20 minutes or clocking in by someone else is considered invalid time. 3. Clocking in must start before 12 noon. The period from 12 noon to 1 pm cannot be interrupted by removing the card, otherwise it will be considered invalid time.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.