How to Handle Violation Code 10871?

2 Answers
SanPeyton
07/25/25 3:17am
Violation code 10871 refers to unauthorized modification of the vehicle's appearance and registered technical data, resulting in 0 demerit points and a fine of 500 yuan. Common violation codes and penalties are as follows: 1001: Driving a modified motor vehicle on the road, no demerit points, fine of 2000 yuan. 1229: Motor vehicle violating prohibition sign instructions, 2 demerit points, fine of 100 yuan. 1728: Driving a school bus on roads other than highways at a speed exceeding 50% of the prescribed limit, 12 demerit points, fine of 2000 yuan. 4701: Reversing on a highway, 12 demerit points, fine of 200 yuan. 5005: Forging or altering motor vehicle insurance marks, no demerit points, fine of 3000 yuan. 5010: Using forged or altered motor vehicle inspection marks, no demerit points, fine of 3000 yuan. 5701: Using forged or altered motor vehicle license plates, 12 demerit points, fine of 5000 yuan. 6035: Driving under the influence of alcohol after being previously penalized for the same offense, no demerit points, fine of 2000 yuan. 13030: Motor vehicle driving in the opposite direction, 3 demerit points, fine of 200 yuan. 17170: Driving a motor vehicle on the road without displaying a license plate, 12 demerit points, fine of 200 yuan. Violations can be handled through the "Traffic Management 12123" mobile app. The process is as follows: Step 1: After logging into the "Traffic Management 12123" app, go to [Business Center] → [Violation Handling] to enter the violation handling process. Step 2: Select the motor vehicle with pending violations to enter the list of unprocessed violations. Click on the corresponding violation record to view detailed information. Step 3: After selecting the violation record to be processed, click [Handle and Pay], carefully read the violation handling instructions, and click [Read and Agree] to proceed to the confirmation and payment method selection page. Step 4: After clicking confirm, proceed to the payment page and complete the payment.
Was this review help?
18
5
Share
DelFelix
08/10/25 4:56pm
I previously got a traffic violation code 10871, which I think was for not using the turn signal or something like that. Handling it was actually quite simple: First, download the Traffic Management 12123 app or check the violation details on the local traffic police website to see the specific time, location, and photos; then just pay the fine online, either through Alipay or WeChat, usually ranging from 50 to 200 yuan. If points were deducted, don’t worry—the app also allows you to sign up for a study course to reduce a few points. The key is to learn from it—develop the habit of using your turn signal at least 3 seconds before changing lanes, don’t skip those two seconds. Before your next drive, think about the spots where you might get caught, like highway exits or busy intersections. Once you’ve improved your safety awareness, you won’t make the same mistake again. That’s how I’ve managed over the years—saving both hassle and money.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What car has the cobra logo?

The car with the cobra logo is Ford's Shelby sports car, also known as Shelby. The Shelby GT500 version is equipped with a 5.4L V8 supercharged engine, delivering a maximum horsepower of 540 hp and a peak torque of 510 Nm. The Shelby GT500 version has body dimensions of 4765mm in length, 1879mm in width, and 1384mm in height, with a wheelbase of 2720mm. The vehicle weighs 1778kg and features an independent MacPherson strut front suspension with reverse L-shaped lower control arms, along with a solid axle and three-link rear suspension with coil springs and a Panhard rod.
17
4
Share

What car has a logo that looks like a crown?

The car with a logo resembling a crown is the Toyota Crown, a mid-to-large-sized sedan under the Toyota Group. The Toyota Crown features meticulous design details, with high-quality materials and assembly craftsmanship that reflect Toyota's high standards. In terms of body dimensions, the Crown measures 5020mm in length, 1805mm in width, and 1480mm in height, with a wheelbase of 2925mm. For suspension, the Crown uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The domestically produced Crown is equipped with three engine options: 2.5L, 3.0L, and 4.3L. The first two are V6 24-valve engines, while the 4.3L is a V8. The Crown also features the Dual VVT-i system, which intelligently adjusts the timing of both intake and exhaust valves.
12
1
Share

What does releasing the handbrake mean?

Releasing the handbrake means to loosen the handbrake and let it fully disengage, at which point the braking system no longer has any effect. Pulling the handbrake is done after parking to prevent the vehicle from moving further, especially on slopes where the car might slide due to gravity. Therefore, after parking, the handbrake should be pulled up. Below is an introduction to the handbrake: 1. The professional name for the handbrake is the parking brake. The function of the handbrake is to stabilize the vehicle after it has stopped, preventing accidents caused by the car rolling on inclined surfaces. There are different types of parking brakes: mechanical systems operated by hand or foot are called mechanical handbrakes. Electronically controlled parking brake systems are commonly known as electronic handbrakes. 2. The handbrake operates slightly differently from the service brake; it uses a steel cable connected to the rear brake to apply braking force. When driving on slopes during traffic jams, it is essential to remember to pull the handbrake, but you should not drive with the handbrake engaged, as it can cause significant wear to the brakes. Extra caution is also required when using the handbrake on highways.
13
0
Share

What does 'mirror' mean on a car?

The 'mirror' button on a car refers to the power adjustment controls for the left and right side mirrors. Adjustment method: Turn the switch to 'L', then press the corresponding arrow buttons below to adjust the viewing angle of the left side mirror. Turn the switch to 'R', then press the corresponding arrow buttons below to adjust the viewing angle of the right side mirror. Notes: There is a matter of field of view with mirrors, which refers to the range that the mirror surface can reflect. The industry has proposed three key elements of field of view: the distance between the driver's eyes and the mirror, the size of the mirror, and the radius of curvature of the mirror surface. These three elements are interrelated - when the distance and size are the same, a smaller radius of curvature results in a wider reflected field of view. For proper adjustment: the left/right position should be set so the left edge of the mirror just cuts off the right ear of your reflection, meaning the driver won't be visible in the center mirror during normal driving. The up/down position should place the distant horizon in the center of the mirror.
1
3
Share

What is an In-Vehicle T-BOX?

An in-vehicle T-BOX is a vehicle information and positioning transmission system, abbreviated as in-vehicle T-BOX. Additional information about in-vehicle T-BOX is as follows: 1. The in-vehicle T-BOX can deeply read CAN bus data and private protocols of the vehicle. The T-BOX terminal features an OBD module with dual-core processing and a dual-core CPU architecture, which separately collects bus data related to DCAN, KCAN, and PTCAN, as well as reverse control of private protocols. 2. The in-vehicle T-BOX transmits data to the cloud server via the GPRS network, providing vehicle condition reports, driving reports, fuel consumption statistics, fault alerts, violation queries, location tracking, and more.
13
5
Share

Is the M gear for climbing hills or high speed?

M gear can be used for both climbing hills and high speed. More information about M gear is as follows: 1. M gear is the manual mode in automatic transmission models. After switching to M gear, the driver can manually shift gears up or down to control the gear position, which is equivalent to driving a manual transmission car. 2. By switching to manual M gear and downshifting to 1st gear, rapid overtaking can be achieved. 3. When encountering long and steep slopes, it is necessary to switch to M gear and adjust to 1st or 2nd gear. This utilizes the engine's braking effect to slow the vehicle while reducing pressure on the brake pads. Prolonged braking in D gear when going downhill can cause the brake pads and wheel hubs to overheat, not only affecting the lifespan of the components but also potentially leading to complete loss of braking performance and safety accidents in severe cases.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.