How to Handle Vehicle Scrapping in a Different Location?

2 Answers
AliceLee
07/23/25 9:11pm
Methods for handling vehicle scrapping in a different location: Sell the vehicle to a dismantling factory in the scrapping location, then apply to the local vehicle management office for an out-of-area vehicle dismantling certificate. The vehicle owner must submit the required documents for deregistration along with the out-of-area dismantling certificate to apply for deregistration. Below is an introduction to vehicle scrapping: 1. Scrapping Conditions: If a vehicle still fails to meet national emission standards after repairs or adjustments, or if it fails to meet road safety standards after adjustments and repairs, or if it fails to obtain an inspection pass mark for three consecutive inspection cycles after the expiration of the inspection period, or if it reaches a certain age, it will be forcibly scrapped. 2. Annual Inspection Regulations: If a vehicle fails the annual inspection or does not undergo the inspection within the specified time, it will be forcibly scrapped. Currently, private vehicles are required to undergo inspection every two years for the first 6 years, annually from the 7th to the 15th year, and every six months after 15 years. If a vehicle fails to pass or does not undergo the annual inspection within three inspection cycles, it will automatically be forcibly scrapped.
Was this review help?
6
0
Share
StGage
08/10/25 7:03pm
Last month, I scrapped my car in another city, and the whole process was easier than expected. My car broke down during a business trip and couldn't be repaired, so I found a government-designated recycling center locally. After making a phone appointment, they sent someone to inspect the car's condition, processed the scrapping on the spot, and issued me a certificate. It cost about 200 yuan and took roughly a day. The key is to find an official institution—don’t go for cheap, unreliable small workshops, as they may pose safety risks. After getting the certificate, I immediately mailed it back to my hometown’s vehicle management office to apply for deregistration, and it was done within a week. I recommend checking local policies in advance, such as visiting the official website or calling the 12345 hotline for inquiries, to avoid unnecessary trips and save time and effort. Although handling it out of town is a bit of a hassle, it’s a relief once it’s done. For cars in poor condition, scrapping them early means peace of mind sooner.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

Is it necessary to replace the throttle body?

The throttle body does not need to be replaced if it is functioning normally and has no faults. Precautions for cleaning the throttle body are as follows: 1. Remove the throttle body for cleaning: This ensures thorough cleaning. Avoid spraying cleaning fluid in only one direction or onto the electrical components of the throttle body, as this may cause severe damage. 2. Spray cleaning fluid onto areas with heavy carbon buildup: Wait 5-10 minutes for the carbon deposits to dissolve, then use a clean brush to scrub and wipe with a clean towel. 3. Cleaning the throttle body helps maintain vehicle performance: It is recommended that owners clean the throttle body regularly, typically every 20,000 to 40,000 kilometers.
10
2
Share

Does the Hongqi HS7 have a seven-seater version?

The Hongqi HS7 is available in a seven-seater configuration, as it is a mid-to-large-sized SUV. Taking the 2021 Hongqi HS7 as an example, its body dimensions are: length 5035mm, width 1989mm, height 1778mm, with a wheelbase of 3008mm and a curb weight of 2120kg. The 2021 Hongqi HS7 features a double-wishbone independent front suspension and a trapezoidal-arm multi-link rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 252PS, a maximum power of 185kW, and a maximum torque of 380Nm, paired with a 7-speed dual-clutch transmission.
5
1
Share

How to adjust the non-one-touch power windows on the Cadillac XT5?

Cadillac XT5's non-one-touch power windows can be adjusted as follows: 1. Press the button to the first position and hold until the desired position is reached, then release; 2. Briefly press the switch to the second position to automatically open the window; 3. Pull the switch to the first position and hold until the window moves to the desired position; 4. Pull the button forcefully to reach the second position, at which point the window will fully close. Taking the 2021 Cadillac XT5 as an example, its body dimensions are: length 4813mm, width 1903mm, height 1682mm, wheelbase 2857mm, and body weight 1830kg.
16
4
Share

What is ELV in automobiles?

ELV (End-of-Life-Vehicle) refers to the End-of-Life Vehicle Directive. ELV is a vehicle recycling directive established by the European Commission and the European Parliament to protect the environment and reduce waste generated from vehicle scrapping. More details are as follows: 1. Content: First, it prohibits the use of four harmful substances - lead, cadmium, mercury, and hexavalent chromium - in vehicles produced after July 2003. Second, it aims to improve the recycling rate of end-of-life vehicles, with all or most of the recycling costs borne by the manufacturers. 2. Function: The recycling directive sets two phases for EU end-of-life vehicles - 'reuse and recycling' and 'reuse and recovery' - along with recycling rate targets. It also clearly specifies the limits for recycling rates and the prohibition or restriction of heavy metals.
6
2
Share

What is the body length of the Audi Q7?

The body length of the Audi Q7 is 5067mm, with a width of 1970mm and a height of 1731mm. Taking the 2020 Audi Q7 as an example, it belongs to the mid-size SUV category, with a wheelbase of 2996mm, a fuel tank capacity of 85 liters, and a curb weight of 2115kg. The 2020 Audi Q7 features a multi-link independent suspension at the front and rear, and is equipped with a 2.0T turbocharged engine that delivers a maximum horsepower of 245PS, a maximum power of 180kW, and a maximum torque of 370Nm, paired with an 8-speed automatic transmission.
9
4
Share

What to Do When a Mouse Gets into the Car Engine?

The solutions for a mouse getting into the car engine are: 1. Install an electronic rodent repellent in the engine compartment to drive away mice with ultrasonic waves emitted by the repellent; 2. Place some rodent-proof bags or camphor balls in hidden locations within the engine compartment. Methods to prevent mice from entering the car engine include: 1. Avoid parking the vehicle in areas prone to rodent infestation; 2. Regularly inspect the sealed parts of the chassis for any leaks or damages; 3. Maintain the cleanliness of the vehicle, avoid leaving food or biscuits in the cabin, and promptly dispose of edible waste; 4. Periodically check the external air conditioning inlet and outlet filter screens for any detachment or damage.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.