···
Log in / Register

How to Handle Vehicle Inspection in a Different Location?

4 Answers
DelAdelyn
07/29/25 9:22pm
With sufficient documentation, you only need to submit an application to the relevant authorities. Below is a detailed introduction to out-of-town vehicle inspection: 1. Vehicle Inspection Authorization Letter: First, you need to obtain a notice of entrusted inspection from the vehicle management office where the car was originally registered. The owner does not have to go in person for this procedure, so they can have someone else handle it at the original registration location. 2. Required Materials: The owner's ID card, vehicle license, insurance documents, original and photocopy of the vehicle and vessel tax payment, and an application for out-of-town inspection. If someone else is handling it on behalf of the owner, a power of attorney from the owner is required. 3. Inquiry: Once the relevant vehicle inspection authorization information is received, you can proceed with the normal out-of-town vehicle inspection.
Was this review help?
15
0
Share
MacKatherine
08/15/25 8:02pm
Last year, I bought a car and then moved to work in another city, so I had to figure out the out-of-town vehicle inspection process myself. I remember the first step was to prepare the required documents, including a copy of the owner’s ID card, the original vehicle license, a copy of the compulsory traffic insurance policy, and the green vehicle registration certificate. The second step is to go to the local vehicle management office or an authorized inspection station to handle it. The process is quite simple—just submit the documents, and they will check the vehicle’s exterior and safety performance, which doesn’t take much time. The third step is to pay the fee and receive the new inspection sticker. The whole process takes about half an hour. Now, the policy has been relaxed to allow nationwide inspections, so a letter of authorization is no longer required—previously, I had to trouble a friend to handle it in my hometown, which is much more convenient now. I recommend calling the local vehicle management office before heading out to confirm the document list to avoid a wasted trip. It’s also best to go on a weekday morning when there are fewer people to get it done faster.
Was this review help?
15
3
Share
Expand All
McMartin
10/17/25 3:22am
Out-of-town vehicle inspection is not that complicated, mainly involving a few key steps. First, prepare the necessary documents: driver's license, vehicle registration certificate, ID card—these basic materials. If the owner delegates someone else to handle it, a power of attorney used to be required, but now policies have changed, and most cases can be processed directly without the hassle. Then, simply go to the inspection station in the other location, where they will check the vehicle's condition, including lights, brakes, and emissions, to ensure safety compliance. After passing, pay the inspection fee, and you'll receive the new inspection sticker. The whole process is time-saving and convenient. A reminder: check the local inspection station's address and opening hours a week in advance to avoid delays.
Was this review help?
6
0
Share
Expand All
DeDaniella
11/30/25 4:05am
It's much easier for us elderly to have our cars inspected in other places now. In the past, we had to make a trip back to our hometown, which was quite a hassle. Now, with the nationwide inspection policy, we just need to bring the vehicle license, registration certificate, and ID card to the local vehicle management office. The staff will help check the vehicle condition, pay the fee, and get the inspection sticker. It's simple and effortless, without much to worry about.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

What engine does the SWM X3 use?

SWM X3 is equipped with a 1.6L naturally aspirated engine and a 1.5T turbocharged engine. The functions of the engine are: 1. Fully burning the fuel injected into the cylinder to generate power; 2. Determining the vehicle's power performance, fuel economy, stability, and environmental friendliness. The 2020 Value Edition SWM X3 features a MacPherson independent front suspension and a five-link coil spring rear suspension. It is powered by a 1.5L naturally aspirated engine with a maximum horsepower of 112 PS, a maximum power of 82 kW, and a maximum torque of 152 Nm, paired with a 5-speed manual transmission.
2
2
Share

What to Do When ETC Signal is Weak?

The solutions for weak ETC signal are: 1. Reserve a cutout for ETC when installing metal film; 2. Replace with a new ETC device; 3. Change the installation position of the ETC. The installation method of the ETC device is: 1. Purchase the ETC device, check if the equipment is complete, and read the installation manual; 2. Determine the installation direction of the ETC device, with the solar panel facing outward; 3. Peel off the back adhesive of the device, fold the solar panel towards the vehicle's front windshield, and press firmly to ensure secure attachment; 4. Install the device at the center top of the vehicle's front windshield, ensuring it does not obstruct normal driving visibility. It should be adhered in one go and not removed for reattachment; 5. Insert the ETC card to activate the ETC device. Upon hearing a beep from the device and seeing the indicator light turn on, the device is activated, and the installation is complete.
9
4
Share

What are the drawbacks of ECU remapping for engines?

The drawbacks of ECU remapping for engines are: 1. It requires the use of higher-quality fuel, which increases driving costs; 2. If the ECU upgrade is not done properly, it can affect the engine's lifespan, cause the engine warning light to illuminate, and result in unbalanced power output; 3. Some vehicle models may experience excessive power after the upgrade, making the braking system inadequate, potentially leading to longer braking distances and safety concerns; 4. It may void the warranty. The function of an engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning it in a sealed cylinder, causing the gas to expand and push the piston to perform work. The components of an engine include: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system.
3
3
Share

Should the engine be warmed up before an oil change?

It is necessary to warm up the engine before changing the oil. The method for warming up is: After starting the vehicle, let it idle for 1 to 2 minutes to allow the engine coolant to reach normal temperature. The steps for changing the oil are: 1. Lift the vehicle, remove the undercover, and place a container beneath the oil drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after the oil has drained and wipe it with a tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and add new oil through the filler port. Precautions for changing the oil include: 1. Perform the oil change while the engine is warm to ensure the old oil is drained as completely as possible; 2. Add the appropriate amount of new oil; 3. After adding the oil, start the engine and check all components for leaks. Let the engine run for 3 minutes to confirm the oil level is at the normal mark.
2
2
Share

Is Skoda a Joint Venture or Domestic Car?

Skoda is a joint venture car. Its body dimensions are: length 4675mm, width 1814mm, height 1460mm, with a wheelbase of 2686mm, fuel tank capacity of 68.5 liters, trunk capacity of 570 liters, and a body weight of 1440kg. The 2019 standard version of Skoda features a MacPherson independent front suspension and a four-link independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
5
5
Share

What is the disassembly and installation method for the ŠKODA Superb navigation system?

The disassembly and installation method for the ŠKODA Superb navigation system is as follows: 1. Remove the button panel and air vents on the center console; 2. After removing the panel, unplug the connecting wires, loosen the relevant screws, take out the single-disc CD player, and disconnect the connecting wires to complete the disassembly; 3. Use screws and clips to install the new navigation device in the original center console panel position, remove the packaging from the navigation screen, and eliminate any bubbles on the screen film before completing the installation. The navigation modes include: 1. Path retrieval customization mode; 2. Site setting mode; 3. Map positioning mode. The functions of the navigation system are: 1. Search and processing of map data; 2. Map matching; 3. Route planning; 4. Human-machine interface; 5. Wireless communication.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.