How to Handle Vehicle Annual Inspection in Another Location?

2 Answers
DiBraxton
07/24/25 4:13am
To handle vehicle annual inspection in another location, follow these steps: 1. Apply at the vehicle management office where the license plate was issued, and pay any fines at the location where the violations occurred; 2. For vehicles that cannot undergo inspection on time due to long-term assignments in another location, the owner should submit an application, which will then be forwarded by the original vehicle management office to the local office for proxy inspection; 3. The vehicle owner or unit must fill out the annual vehicle inspection form and submit the vehicle for inspection at a designated location on the date specified by the local vehicle management office; 4. To apply for an out-of-town inspection, visit the branch office of the vehicle management office corresponding to the address listed on the vehicle owner's identity document (for corporate entities, the organization code certificate is required).
Was this review help?
19
1
Share
CodyFitz
08/10/25 11:46pm
I've done vehicle annual inspections in different locations several times, and it's quite convenient. Now with nationwide networking, cross-province inspections are basically possible, eliminating the need to return to my hometown. First step: confirm that the local inspection station supports out-of-town vehicles. You can check on the official 12123 app or search on Gaode Map. Bring all required documents: original vehicle license, owner's ID card, and valid compulsory traffic insurance policy. Second step: book an appointment. I usually use WeChat mini-programs or the inspection station's website to book in advance to avoid queues. At the inspection station, they'll check brakes, lights, emissions, etc. After passing, pay the fee (around 200-300 yuan) and get the inspection sticker. If there are issues like failing brakes, you can fix them on-site or retest to save hassle. The whole process takes about 1-2 hours, perfect for people who travel or are on long business trips. Don't forget to check tire pressure and engine oil before the inspection to save time.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What are the causes of Audi idle vibration?

Audi idle vibration is caused by: 1. Severe carbon buildup inside the vehicle's engine; 2. Issues with the vehicle's ignition system; 3. Unstable fuel pressure in the vehicle's fuel system; 4. Engine aging or damage. The idle speed of a car is not a specific speed but rather an operating condition. When the engine runs without load, it is called idling. When the engine is running and the accelerator pedal is completely released, the engine is in idle state. Audi is a luxury car brand under Audi AG, a subsidiary of the Volkswagen Group in Germany. Taking the Audi A3 as an example, its body dimensions are 4343mm in length, 1815mm in width, and 1458mm in height, with a wheelbase of 2630mm. Its engine has a maximum horsepower of 150Ps, a maximum power output of 110kw, and a maximum torque of 250nm.
11
2
Share

When will the subject three appointment time be released?

Subject three appointment time will be released within three to five days. The methods for subject three appointment include: 1. Self-appointment or online appointment. After successful appointment, the vehicle management office will send a text message to notify the appointment result; 2. Bring your valid ID card to the vehicle management office for appointment, or let the driving school help with the appointment. Subject three includes safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge. Precautions include: 1. Do not forget to adjust the position of the rearview mirror and the height of the seat; 2. Do not forget to fasten the seat belt; 3. Confirm the gear position before ignition.
12
0
Share

Should the New Santana use 5w30 or 5w40?

The New Santana uses 5w40 engine oil. Introduction: Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil. Composition: It mainly contains anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. Engine oil is used for lubricating internal combustion engines. Functions: The primary functions of engine oil are to reduce friction and wear on moving parts, and to remove sludge (one of the functions of dispersants) and varnish (detergents) from the engine. It also neutralizes acids produced from fuel and lubricant oxidation (detergents), improves piston ring sealing, and cools the engine by carrying away heat from moving parts.
20
0
Share

What is the tire model of the Santana?

The Santana has two tire specifications: 185/60R15 and 175/70R14. In 185/60R15, the first number 185 represents the tire width of 185MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 15 represents the rim diameter of 15 inches. The middle letter "R" stands for radial tire. In 175/70R14, the first number 175 represents the tire width of 175MM, 70 indicates the aspect ratio of the tire section is 70%, meaning the section height is 70% of the width, and 14 represents the rim diameter of 14 inches. The middle letter "R" stands for radial tire. The Santana's tire brand is Hankook, known for fuel efficiency and wear resistance. The spare tire specification is non-full size. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle. Check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire; Turn the nuts counterclockwise until they come off. Repeat this step for all lug nuts and completely remove the nuts; Place the new tire on the wheel hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire is also marked with the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
17
4
Share

What are the dimensions of the Teana?

Its body dimensions are 4901mm in length, 1850mm in width, and 1450mm in height. Here is some relevant information: Teana: The Nissan Teana is a flagship mid-to-high-end luxury sedan under the NISSAN brand. The Teana perfectly combines Driving Technology (Precision Driving Engineering) and Comfort Technology (Absolute Comfort Engineering) with cutting-edge technology, bringing the design concept of mid-size sedans to a new level. Interior: The most notable feature of this car is its modern lifestyle-oriented interior, with large areas covered in wood grain trim. The dashboard, seats, and door armrests extensively use kid leather. The large instrument panel, curved seat design, and the center console between the rear seats also add to the luxury. The Teana focuses on the interior to embody the concept of 'modern living'.
16
3
Share

What is ssangyong?

ssangyong refers to the SsangYong Korando SUV. The power of ssangyong comes from a 2.0-liter diesel engine with an output of 175PS, achieving a fuel consumption of 6.0 liters per 100 kilometers and CO2 emissions of only 157 grams per kilometer. ssangyong is equipped with features including ESP electronic stability program, HBA hydraulic brake assist system, HSA hill start assist system, ESS emergency stop signal, and EPS electric power steering system. Introduction to ssangyong: SsangYong Motor is the fourth largest automobile manufacturer in South Korea. Initially, SsangYong produced jeeps for the U.S. military, began manufacturing special vehicles in the 1970s, and was later acquired by the SsangYong Group and renamed to its current name. Exterior design: The overall style follows a European aesthetic. Various user-friendly devices have been added to the configuration. While maintaining its inherent dynamic shape, it also emphasizes quality, sturdiness, balance, and symmetry in design elements, combining the latest design trends with customer needs to achieve a harmonious exterior appearance. The interior design incorporates ergonomic principles, combining black and metallic Grain with orange interior lighting, creating a driving space that is dynamic and futuristic.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.