···
Log in / Register

How to Handle Vehicle Annual Inspection in a Different Location?

1 Answers
LaKaden
08/27/25 3:50am

Below are the detailed steps for handling vehicle annual inspection in a different location: 1. Before applying, the vehicle owner must resolve all traffic violations and accidents related to the vehicle. 2. The owner needs to go to the vehicle registration office at the vehicle's registered location to obtain a vehicle annual inspection delegation notice, authorizing the inspection to be conducted by the vehicle management office in a different location. 3. To apply for the vehicle annual inspection delegation notice, the applicant must bring their ID card, vehicle license, and both the original and photocopies. 4. After completing the delegation procedures, the owner should drive the vehicle to the designated inspection hall at the local vehicle management office for on-site testing. 5. Once the vehicle passes the inspection, the owner can take the inspection report to the service window of the local vehicle management office to print the inspection compliance label.

Was this review help?
10
1
Share
More Forum Discussions

Does a new car need maintenance at 3,000 kilometers?

For a new car, maintenance is required either 3 months from the date of purchase or at 5,000 kilometers, whichever comes first. Once either condition is met, the car should be taken to a 4S shop for maintenance. The first maintenance is free within the specified period, but any maintenance beyond the first one will require payment. If maintenance is not performed as required, the 4S shop may consider it as voluntarily waiving the warranty rights, which is not cost-effective because the nature of the vehicle warranty is similar to buying insurance for the vehicle. Below is an introduction to car maintenance: 1. Introduction to car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Scope of car maintenance: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
14
1
Share

How to lock the fuel tank cap of a Volkswagen car?

To close the fuel tank cap, simply twist it to the right until you hear a clicking sound. Below are detailed instructions about the fuel tank cap: 1. The fuel tank cap refers to the box on the car used for storing gasoline. It is square in shape, made of stainless steel, and has excellent sealing. There is only a small circular opening, about the size of a bottle cap, for easy storage. It is usually located at the rear of the car. 2. If the fuel tank cap cannot be opened, you can start from the trunk. First, remove the trunk lining that covers the fuel tank. The lining is usually secured by some plastic clips and can be easily pried off with a screwdriver. After removing the lining, you can see the locking mechanism of the fuel tank cap and the cable used for remote operation. Simply pull the cable to open the fuel tank cap.
19
0
Share

Are New Energy Vehicles Exempt from Vehicle and Vessel Tax?

For eligible new energy vehicles, there is no need to pay vehicle and vessel tax. According to Article 2 of the "Notice on Preferential Policies for Energy-Saving and New Energy Vehicles and Vessels Regarding Vehicle and Vessel Tax": New energy vehicles and vessels are exempt from vehicle and vessel tax. New energy vehicles exempt from vehicle and vessel tax include pure electric commercial vehicles, plug-in (including range-extended) hybrid vehicles, and fuel cell commercial vehicles. Pure electric passenger vehicles and fuel cell passenger vehicles are not subject to vehicle and vessel tax and are exempt from it. Below are the benefits of new energy vehicles: 1. Fuel energy savings: New energy vehicles generally use natural gas, petroleum gas, hydrogen, or electricity as power sources, saving fuel energy. 2. Reduced exhaust emissions: New energy vehicles produce no exhaust emissions, effectively protecting the environment. Electric vehicles do not emit tail gases and are pollution-free. Hydrogen-powered vehicles emit water as exhaust, which causes no environmental pollution. Since they are essentially zero-emission, they are also exempt from traffic restrictions based on license plate numbers. 3. High efficiency: New energy vehicles generally adopt new technologies and structures, making them more efficient.
7
0
Share

Do You Need to Keep Pressing the Accelerator When Driving at a Constant Speed?

When driving, you still need to continue pressing the accelerator after reaching a steady speed; otherwise, the speed will gradually decrease until the vehicle stops. Below is relevant information about pressing the accelerator in a car: Proper Techniques for Pressing the Accelerator: The engine's accelerator is typically controlled by a pedal, also known as the throttle pedal, which regulates the fuel supply to the vehicle's engine. To operate the accelerator pedal, place the heel of your right foot on the floor of the driver's compartment as a pivot point, then gently press the accelerator pedal with the ball of your foot, using ankle movements to press down or release. When pressing or releasing the accelerator pedal, apply force gently, ensuring a smooth and gradual motion. Precautions When Pressing the Accelerator: When driving uphill, avoid pressing the accelerator pedal all the way down. When using a low gear, it is generally advisable to press the accelerator halfway. Similarly, avoid pressing the accelerator pedal fully when climbing a slope. If the engine does not respond with increased speed after pressing the accelerator three-quarters of the way while driving, shift to a lower gear and then press the accelerator to accelerate.
11
5
Share

What are the effects of larger tire sizes?

Tire sizes that are too large will result in shorter mileage, failure to pass annual inspections, increased fuel consumption, and may lead to phenomena such as 'tire wear' or 'pulling to one side,' as well as reduced tire lifespan. Specific effects of larger tire sizes: Original tires are more in line with fuel consumption standards. Larger tires mean increased weight, leading to higher fuel consumption during driving. Mileage becomes shorter because as the tire and rim size increase, the tire's diameter and radius lengthen, increasing the circumference. This results in a reduced rotation speed and noticeable changes in the distance covered per rotation. Failure to pass annual inspections is due to Article 16, Section 1 of the 'Road Traffic Safety Law of the People's Republic of China,' which states that no unit or individual may assemble motor vehicles or alter the registered structure, construction, or characteristics of motor vehicles without authorization. Precautions for replacing car tires: When selecting tires, the specifications must match the previous tires and be identical to the other tire on the same axle, including speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. The valve stem should also be replaced because, after changing tires, the aging cycles of the new tire and valve stem differ. During the new tire's lifespan, the valve stem may develop issues that are not easily noticeable. Therefore, it is best to replace the valve stem when changing tires. Installation direction and inflation: If using original equipment tires, follow the manufacturer's installation requirements. For non-original tires, the side with the production date usually faces outward. For directional tires, align the arrow on the wheel with the car's forward direction. When inflating, fill to the maximum pressure allowed by the tire, then reduce to the manufacturer's specified standard pressure.
2
4
Share

What lights to use when preparing to overtake?

When preparing to overtake, turn on the turn signal in advance and observe the vehicles behind. If the following vehicle is too close, it is not recommended to signal and overtake, as this can easily catch the following vehicle off guard. Additional information is as follows: 1. Overtaking lights: Whether during the day or at night, overtaking is done from the left side. Overtaking from the right is generally not allowed and is very dangerous. When overtaking, turn on the turn signal in advance and observe the vehicles behind. If the following vehicle is too close, it is not recommended to signal and overtake, as this can easily catch the following vehicle off guard. 2. Overtaking precautions: To prevent the vehicle ahead from changing lanes during overtaking, it is essential to alert them by honking or quickly switching between high and low beams. Observe the vehicle ahead; if there is no intention to change lanes, you can then accelerate to overtake.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.