How to Handle Traffic Violations on Your Driver's License via Mobile Phone?

2 Answers
DeParker
07/25/25 2:32pm
Download the Traffic Management 12123 APP, open the APP, and follow the instructions to register. After successful registration, bind your driver's license and register your vehicle. If there are any unhandled violations, they will be displayed next to the registered vehicle. Click on the violation, then click on 'Pending Violation', and finally click on 'Handle and Pay Fine'.
Was this review help?
1
1
Share
DeCourtney
08/11/25 9:08pm
I always use my phone to handle traffic violations, which is super convenient. Last year, I got a speeding ticket and directly downloaded the 'Traffic Management 12123' APP from the app store. During registration, I linked it with my ID number and phone number. After logging in, I could check all the violation records under my name. Clicking into the details, it showed the fine amount and point deduction info. After confirming everything was correct, I selected payment—supporting WeChat or Alipay QR code scans—and the whole process took less than 5 minutes. Remember to always download the APP from the official website or trusted sources to avoid fake phishing software. After handling it, it's best to screenshot and save the receipt. Sometimes, the system delays, so log in again after a few days to check the status to avoid extra points if it didn’t go through. Usually, driving carefully and avoiding violations is key, but in case of emergencies, handling it via phone saves you the hassle of queuing at the traffic police station.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is the Mnemonic for Vehicle Yielding Rules?

Straight yields to left, left yields to right — these are the three major mnemonics for vehicle yielding regulations. The specific details are as follows: 1. Rule One: Vehicles going straight must yield to vehicles coming from the right. 2. Rule Two: Vehicles turning right must yield to vehicles turning left. 3. Rule Three: If the situation falls under Rule One, the remaining conditions need not be considered. If it falls under Rule Two, Rule Three need not be considered. If it falls under Rule Three, then the first two yielding principles must be taken into account. Additional information regarding traffic lights is as follows: 1. Introduction: Traffic lights are signals that direct traffic and typically consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. 2. Control Methods: The most basic control method is timed control at a single intersection. Line control and area control can also employ timed control methods, known as static line control systems and static area control systems, respectively.
12
1
Share

Can Adding Sugar to the Engine Be Detected?

Adding sugar to the engine can be detected if it was recently added and the time is relatively short, as the sugar hasn't had time to melt yet. However, if the vehicle has been driven for a while, the high temperature of the engine will cause the sugar to melt, making it undetectable. Nevertheless, it can still be determined by checking the viscosity of the engine oil and the condition of the engine lubrication system components. Maintenance Notes: As a crystalline substance, sugar does not dissolve in engine oil. However, as the vehicle is driven and the engine block temperature rises, the sugar will gradually melt, significantly increasing the oil's viscosity. This can cause the engine to experience "bearing seizure," preventing normal circulation. If sugar has caused damage to the engine, a major overhaul is necessary. The entire oil system must be cleaned and inspected, and components such as the oil pump and oil pipes that may have become clogged will need to be replaced. It is advisable to have repairs done at an authorized service center, as although the cost may be higher, the quality is guaranteed. If repairs are done outside a service center, it is recommended to monitor the process closely if possible. Choose a repair shop with a good reputation and strong brand. Additionally, the difference between authorized service center repairs and external repairs lies in their qualifications. Authorized service centers must undergo a series of strict inspections by the automobile manufacturer before being approved, meaning they have official recognition from the manufacturer.
14
3
Share

What Causes the Brake Light to Illuminate When the Brake Pedal is Pressed?

When a driver presses the brake pedal, the reasons for the brake light on the dashboard to illuminate include loss of hydraulic pressure in the brake system and thinning of the brake pads. Loss of hydraulic pressure in the brake system: If the brake fluid is insufficient, the hydraulic pressure in the brake system will decrease or even disappear. This is because the two hydraulic circuits in the brake system are typically separated in most rear-wheel-drive vehicles—one circuit applies to the front brakes and the other to the rear brakes. In front-wheel-drive cars and small trucks, the system is usually split diagonally. One circuit serves the right front and left rear brakes, while the other serves the left front and right rear brakes. If the hydraulic circuit lacks sufficient fluid, the hydraulic pressure will disappear, causing the brake system to fail, which may result in an inability to brake, and the car's brake light will illuminate when the brake is applied. Thinning of the brake pads: If the brake pads have worn down to the point where they need replacement, the brake light will illuminate when the brake pedal is pressed, reminding the owner to replace the brake pads promptly. This is because the car's brake pads are equipped with a manufacturer-set wear indicator line. When the brake pads reach their usage limit, an alert will appear. Owners should regularly inspect the tire brake pads and use a measuring tool to check the thickness of the brake pads. If significant wear is detected, the brake pads should be replaced promptly.
12
2
Share

Can Beijing National VI Diesel Vehicles Be Licensed?

Beijing National VI diesel vehicles cannot be licensed. The following is extended content: 1. Phase V Emission Control Requirements: "Limits and Measurement Methods for Exhaust Pollutants from Compression Ignition and Gas Fuel Positive Ignition Engines and Vehicles (China III, IV, V Phases)"; "Limits and Measurement Methods for Exhaust Pollutants from Compression Ignition and Gas Fuel Positive Ignition Engines and Vehicles (Bench Test Method)"; "Limits and Measurement Methods for Exhaust Pollutants from Heavy-Duty Vehicles (On-Board Method)". 2. Enterprise Declaration Requirements: Enterprises declaring for the environmental protection catalog must continue to follow the requirements stipulated in "Notice on the Declaration Requirements for Heavy-Duty Diesel and Gas Vehicles (Engines) for the Beijing Environmental Protection Catalog" and "Notice on Relevant Regulations for Heavy-Duty Vehicle Emission Control". At the same time, enterprises must strengthen production management to ensure that sold vehicles stably meet the standards. 3. Heavy-Duty Diesel Vehicle Requirements: New heavy-duty diesel vehicles (such as buses, sanitation vehicles, tourist vehicles, postal vehicles, dump trucks, shuttle buses, school buses, airport buses, etc.) used within the administrative area of Beijing should be equipped with wall-flow particulate filters (DPF). 4. Vehicle Registration Requirements: Vehicle models that do not comply with Phase V regulations will not be processed for vehicle registration. Heavy-duty diesel vehicles meeting Phase IV emission standards purchased before August 1, 2015 (based on the date of the purchase invoice) or transferred from other provinces to Beijing before that date (based on the transfer registration date in the vehicle registration certificate) can continue to be processed for vehicle registration.
20
2
Share

Why doesn't the BMW 1 Series make a sound when locking?

BMW 1 Series does not make a sound when locking because the locking sound feature is not enabled. The method to set the locking beep for BMW 1 Series is to activate the remote key's locking horn function by simultaneously pressing the unlock and lock buttons for 3 seconds until the lights flash. Relevant information about BMW sedans is as follows: 1. Design characteristics: BMW sedans feature distinctive body styling with round headlights paired with rectangular radiator grilles, creating a unique style. 2. Powertrain: All BMW models are rear-wheel drive. The rear-wheel drive configuration allows for a 50-50 weight distribution between front and rear, providing better performance during high-speed cornering and straight-line driving compared to front-wheel drive vehicles.
4
0
Share

What is the working principle of a rotary engine?

Working principle of a rotary engine: The rotary engine directly converts the combustion expansion force of combustible gas into driving torque. Compared with reciprocating engines, the rotary engine eliminates useless linear motion, resulting in a smaller size, lighter weight, and lower vibration and noise for the same power output, giving it significant advantages. Conventional engines are reciprocating engines, where pistons move back and forth in a straight line within the cylinders. To convert this linear motion into rotational motion, a crankshaft-slider mechanism is required. In contrast, the rotary engine uses a triangular rotor's rotational motion to control compression and exhaust, which differs significantly from the linear motion of traditional reciprocating piston engines.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.