How to handle traffic violations on 12123?

2 Answers
VonAlan
07/24/25 8:46am
Methods for handling traffic violations on 12123: 1. Scan the relevant QR code: Scan the QR code of the registered vehicle, take the required photos as prompted, fill in detailed information, and enter the SMS verification code of the vehicle owner. 2. Fill in the relevant information: After entering the details and the SMS verification code of the registered vehicle owner, the system will automatically review and approve, allowing you to proceed with handling the violation. The following are the impacts of unprocessed traffic violations: 1. Late fees: If a ticket issued on the spot is not paid within 15 days, late fees will be incurred. 2. License and vehicle seizure: If more than 3 violations are left unprocessed, the traffic police may seize your license upon inspection, and in severe cases, your vehicle may also be impounded. 3. Impact on license renewal, replacement, or transfer: If a ticket issued on the spot is left unprocessed, the driver cannot renew, replace, or transfer their license. 4. No insurance claims: In case of accidents or vehicle damage, the insurance company will not provide compensation. 5. Impact on vehicle annual inspection: The vehicle will not pass the annual inspection.
Was this review help?
4
3
Share
DiGrant
08/11/25 4:19am
Last time I dealt with a traffic violation, I used the Traffic Management 12123 APP, which was super convenient. After logging into the APP, I clicked on the violation query option, entered the license plate number and engine number, and immediately saw all the violation records. Just confirm whether it was your car, and if the time and location of the violation are correct. Generally, fines can be paid directly online, with support for Alipay or WeChat. For points deduction, you’ll need to bring your ID card to the traffic police station, though many places now allow online point processing as well. Be careful not to delay too long; overdue payments can lead to additional fines—I once forgot to pay and ended up spending an extra 100 yuan. To prevent violations, it’s good to listen to navigation prompts, avoid speeding, and always stop completely at traffic lights. Developing these habits can save a lot of hassle, and safety always comes first.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

What car has a logo resembling a ram's head?

The car logo resembling a ram's head is Dodge. "Dodge" is an automobile brand headquartered in the United States. The trademark uses the surname "Dodge" of the Dodge brothers, and the graphic trademark features a ram's head inside a pentagon. The brand uses two logos on its vehicles: a small ram and a large ram. Here is some relevant information about Dodge: 1. The founders of the Dodge brand were two brothers born in Michigan, USA. The elder brother, John Dodge, was born in 1864, and the younger brother, Horace Dodge, was born in 1868. In 1886, the Dodge family moved to Detroit and began their entrepreneurial journey. 2. Dodge (Dodge) Bearing Company in the United States is the world's largest manufacturer of housed bearings, established in 1880, with a history of 120 years to date, and its products are distributed worldwide. In 2007, it was acquired by Baldor Electric Company in the United States, becoming Baldor.Dodge.Reliance.
14
2
Share

When Should the Transmission Fluid of BMW 5 Series Be Replaced?

The transmission fluid of BMW 5 Series should be replaced every 80,000 kilometers. If the gears shift smoothly and there is no significant change in transmission noise, replacement may not be necessary. Methods for replacing the transmission fluid in BMW 5 Series: 1. Gravity replacement. The principle is similar to oil replacement. After loosening the tightening nut at the bottom of the oil pan, the transmission fluid will automatically flow out from the drain hole. This method is simple but cannot completely drain the transmission fluid. In the grooves and recesses of the machinery, the transmission fluid often cannot be fully drained. 2. Circulation machine replacement. The new transmission fluid is stored inside the circulation machine, and the transmission is connected to the machine via pipeline interfaces. Under hydraulic pressure, the new fluid pushes out the old fluid. This method cleans the oil passages more thoroughly. The more new transmission fluid used, the cleaner the cleaning. A single circulation machine replacement requires about 10-13 liters of transmission fluid and takes approximately 40-80 minutes. 3. Removing the oil pan for replacement. This method cleans from the root, achieving a more thorough cleaning, and allows for the cleaning of the transmission fluid filter.
20
5
Share

How to adjust the time on an Octavia?

To adjust the time on an Octavia, follow these steps: 1. Turn the small black cylinder on the dashboard to the left. The hour display will start flashing, allowing you to adjust the hour. Press once to increase by one hour. 2. Turn it to the right, and the minute display will flash, enabling you to adjust the minutes. Press once to increase by one minute. 3. When the Octavia's dashboard displays the time, press and hold the black button (for about 3 seconds) until the display flashes. Short presses adjust the hour. Press and hold again (about 3 seconds) to make the minute display flash, and short presses adjust the minutes. Press and hold once more (about 3 seconds) or do nothing to return to normal time display, confirming the time has been set.
11
3
Share

How to Adjust the Headlights of a Ford Focus?

The key points for adjusting Ford Focus headlights are as follows: 1. Position the front of the car perpendicular to a wall, approximately 10 meters away. 2. Use the high beams for adjustment; generally, if the high beams are properly adjusted, the low beams will also be correct. It's best not to adjust using the low beams, as it can be difficult to determine if the high beams are properly aligned. 3. Cover the headlight that is not being adjusted with a cloth, and adjust one at a time. Below are the detailed steps for adjusting Ford Focus headlights: 1. After turning on the high beams, stand in front of the headlight with your feet as close to the headlight as possible. Observe where the high beam light falls on your feet, and note the center point of the brightest spot (the light core). 2. Then move to the wall, maintaining a perpendicular position, and mark the spot on the wall corresponding to the light core position on your feet. 3. Use a screwdriver to adjust the headlight's gear teeth, ensuring the light core aligns with the marked spot on the wall (the vertical deviation should not exceed 10 cm). 4. You can slightly raise the light core during adjustment (generally no more than 5 cm).
1
2
Share

Which company owns Bisu Auto?

Bisu Auto is an independent domestic brand and is not affiliated with any group. Here are detailed introductions about Bisu Auto: 1. Chongqing Bisu Auto Co., Ltd. was established on April 28, 2015, located in Chongqing Tianding Industrial Park, China. Its products cover multiple segments including MPV, SUV, sedans, and new energy vehicles. 2. Bisu Auto follows a 'precision manufacturing' approach. It undertakes the important mission of enhancing brand value and revitalizing the brand. To achieve precision manufacturing quality, Bisu Auto's research, production, and manufacturing are entirely conducted according to 'international standards.' 3. Bisu Auto currently has three models on sale: the Bisu T3, Bisu T3 CVT, Bisu M3, and Bisu T5. 4. In terms of safety features, the Bisu M3 is equipped not only with the ninth-generation ESP and ARP anti-rollover devices provided by Bosch but also features such as EBA brake assist, TCS traction control, hill start assist, tire pressure monitoring system, front and rear parking radar, reverse camera, and cruise control.
3
3
Share

What are the reasons for unstable idle speed when starting the car?

There are mainly five reasons for unstable idle speed when starting the car, which are: 1. Excessive carbon deposits in the engine. When there is too much carbon buildup inside the engine, the gasoline sprayed by the fuel injector during startup will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture and causing difficulty in starting. The vehicle will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After the engine starts, the gasoline attached to the carbon deposits will be sucked into the cylinders by the engine's vacuum, making the air-fuel mixture too rich. The fluctuating richness of the air-fuel mixture causes idle speed fluctuations during startup. 2. Air filter. If the air filter is not replaced in time, it can lead to insufficient air intake, causing the engine idle speed to drop. 3. Abnormal water temperature. High engine water temperature can cause early ignition timing, alter the air-fuel mixture ratio, and thin the engine oil viscosity (reducing lubricity). Causes of abnormal water temperature include: insufficient coolant, a stuck thermostat, fan malfunction, or inaccurate temperature control switch. 4. Excessive carbon buildup in the throttle body or mass air flow sensor. The throttle body and mass air flow sensor are prone to getting dirty. Most modern cars use electronic throttle bodies, and even a small amount of carbon buildup can affect performance. Excessive carbon deposits in the throttle body can cause sluggish acceleration, severe power loss, and unstable idle speed. 5. Clogged fuel injectors. Clogged fuel injectors can lead to inconsistent fuel spray among the injectors, causing uneven cylinder performance and resulting in unstable idle speed during ignition.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.