How to Handle Traffic Violation Points Deduction on the Traffic Management 12123 App?

Should the car data cable be unplugged?

Leaving the car charger plugged into the cigarette lighter won't affect the battery. Firstly, the car charger uses a series-switching regulated power supply, which remains powered off when no charging device is connected. Additionally, its static current is only about 1-2mA, causing no impact whatsoever. Relevant information about car Bluetooth is as follows: 1. Function: After successful Bluetooth pairing, you can use your phone to play audio files, answer calls, making it very convenient to use. While driving, it ensures driving safety. Once the car's infotainment system is connected to the Bluetooth system, you can make calls directly through the infotainment system in hands-free mode. 2. Automatic connection: Once your phone is connected to the car's infotainment system, it will automatically reconnect upon subsequent use, provided the phone's Bluetooth system is turned on. There's no need for frequent reconnections, saving time and adding convenience to vehicle use. However, when using Bluetooth calls, be mindful of privacy concerns.

3

1

Share

How to eliminate the immediate vehicle condition check prompt in Magotan?

The method to eliminate the immediate vehicle condition check prompt in Magotan is: First turn off the ignition switch, press and hold the zero reset button, then turn the ignition switch to the ACC position, release the button, press and hold the button at the lower left corner of the instrument panel until the screen goes black, then turn on the ignition switch again, and wait until "INSP" flashes 5 times. Taking the Magotan 2020 280TSI DSG Leading model as an example, it is a mid-size 4-door 5-seater sedan with a length of 4865mm, width of 1832mm, height of 1471mm, wheelbase of 2871mm, and a top speed of 208km/h. The engine of this model has a maximum torque of 250 N·m, with the maximum torque range between 1750 to 3000 rpm.

14

2

Share

How to Use the One-Touch Power Window Feature in the Levin?

To use the one-touch power window feature in the Levin, follow these steps: Method 1: Using the door handle controls. 1. Lift the button on the driver's door armrest to the first position (applying excessive force will reach the second position), and release once the window reaches the desired position. 2. Briefly pull the switch to the second position to automatically close the window. Method 2: Using the car key for one-touch window closing. Press and hold the lock button for more than 3 seconds to close all windows simultaneously. Additionally, here's how to use the one-touch window lowering feature: Method 1: 1. Press the button on the driver's door armrest to the first position and hold until the window reaches the desired position, then release. 2. Pressing the button firmly will reach the second position, causing the window to open completely. Method 2: Using the car key for one-touch window lowering. Press and hold the unlock button for more than 3 seconds to automatically lower all four windows.

8

3

Share

How to Reset the Pressure Loss Warning on Volkswagen Bora?

Introduction to resetting pressure loss on Volkswagen Bora: First, turn on the car's ignition switch, press the CAR button on the infotainment system on the center console screen, click on Settings, open Vehicle Settings, and then tap the Tire button. Confirm the tire pressure range, adjust the tire pressure accordingly, and drive at a speed of 15 km/h for ten minutes to automatically reset the system. Below is an introduction to common issues related to tire pressure monitoring: 1. The tire pressure monitoring system warning light remains on: If the warning light stays on after adjusting the tire pressure and performing the reset operation, it may indicate a malfunction in the tire pressure monitoring system. A common issue is the sensor's battery running out. 2. Warning light turns on during heavy load: Due to excessive vehicle load, the tire pressure may exceed the preset upper limit. For models with an active tire pressure monitoring system, you can choose to disable the system or adjust the load. The specific operation involves finding the tire pressure monitoring system in the infotainment system and selecting Standard, Comfort, or Full Load under [Load Status].

19

4

Share

How to Check the Manufacturing Year of Tires?

To check the manufacturing year of tires, follow these steps: 1. Similar to the production date of a car, the manufacturing date of a tire is marked on the outer side of the tire. You don't need to turn the tire inside out. On the sidewall of the tire, there is a set of numbers. The last four digits of this marking provide information about the manufacturing date. It consists of four digits "aabb". The first two digits "aa" indicate the week of the year, and the last two digits "bb" indicate the year. 2. Generally, the 11-digit number and letters immediately following the "DOT" letters on the tire sidewall represent the identification number or serial number of the tire. The last four digits of the serial number indicate the manufacturing date of the tire. The format for the tire manufacturing date code is: the first two digits represent the production week, and the last two digits represent the production year. For example, if the last four digits of DOT are 0807, it means the tire was produced in the 8th week of 2007, which is around the end of February 2007.

20

2

Share

Can Smoking in the Car Be Exhausted by Using the External Air Circulation?

Smoking in the car with external air circulation on. Turning on the external air circulation mode allows outside air to flow into the car while also carrying the smoke out. It is recommended to open the windows when smoking in the car, as this helps the smoke to quickly dissipate with the airflow. If the car makes a vibrating noise when the air conditioner is turned on, there might be several reasons: 1. Dirty air filter: A dirty air filter can cause excessive noise and abnormal sounds. 2. Debris in the blower fan blades: Debris inside the blower fan blades can lead to abnormal sounds. You can check this by turning on the blower without starting the engine to see if the noise occurs. If it does, the issue is likely with the blower. 3. Fan problem: Deformed fan blades or a damaged fan motor in the car's air conditioning system. 4. Worn clutch bearing: A worn clutch bearing inside the air conditioning pump can cause the engine noise to increase when the air conditioner is on. This component cannot be replaced separately and requires the replacement of the entire air conditioning pump assembly.

12

3

Share

How to Handle Traffic Violation Points Deduction on the Traffic Management 12123 App?

Should the car data cable be unplugged?

How to eliminate the immediate vehicle condition check prompt in Magotan?

How to Use the One-Touch Power Window Feature in the Levin?

How to Reset the Pressure Loss Warning on Volkswagen Bora?

How to Check the Manufacturing Year of Tires?

Can Smoking in the Car Be Exhausted by Using the External Air Circulation?

Do you need to use AC in car air conditioning in winter?

What is the button below the rearview mirror in the car?

Why Do Diesel Vehicles Emit Black Smoke?

Is It Normal for the Car's Center Console to Get Hot?