···
Log in / Register

How to Handle the Inspection of a B2 Driver's License?

3 Answers
DelHannah
08/30/25 2:21am
Before the inspection deadline approaches, go to the main office, branch office, or county office where your driver's license is archived to process the inspection for large and medium-sized passenger and cargo vehicles. Below is some information about the driver's license test: 1. Subject 1: Traffic safety laws, regulations, and related knowledge test, written exam, computer-based, full score of 100, passing score is 90 or above (including 90). 2. Subject 2: Field driving skills test, practical driving on-site, pass or fail only, includes reversing into a garage, parallel parking, S-curve, right-angle turn, and hill start and stop. These five items are mandatory and conducted in sequence, full score of 100, passing score is 80 or above (including 80). 3. Subject 3: Road driving skills test, practical driving on highways or simulated sites, full score of 100, passing scores are 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: Safe and civilized driving-related knowledge, written exam, full score of 100, passing score is 90 or above (including 90).
Was this review help?
7
4
Share
Ruby
09/11/25 6:32am
I'm new to the B2 driver's license annual inspection and still a bit flustered. The process is actually quite straightforward: First, prepare your ID card, original driver's license, plus two one-inch ID photos. Then, go to the hospital for a physical exam, which usually checks vision, hearing, and blood pressure—local community hospitals can handle this, just remember to book an appointment to avoid peak hours. Next, open the Traffic Management 12123 APP to complete the learning course, mainly watching traffic rule videos and taking a short quiz, which takes about half an hour. Finally, when submitting the application, choose the online channel for convenience, and double-check that all traffic violations have been handled. It's best to start the whole process at least a month in advance—don't wait until the last minute, as that carries risks. The cost is low, just a few dozen yuan for the physical and learning fees. Remind yourself to check your license status regularly every year—make it a habit, safety first.
Was this review help?
1
2
Share
Expand All
McEverly
10/25/25 7:22am
I'm very familiar with the annual B2 driver's license renewal process. First, prepare all required documents – don't forget your ID card and driver's license. The medical examination focuses on vision and reaction tests – I recommend making a hospital appointment to avoid queues and save time. The learning section can be completed directly through the traffic management 12123 app's road safety module. After submission, just wait for approval, ensuring there are no outstanding violations. The key is efficient handling at minimal cost – I usually complete everything through the app, just uploading the medical report before waiting for updates. Starting preparations two weeks in advance is ideal for time management – the entire process takes just half a day without disruption. Developing this regular checkup habit brings peace of mind and prevents unexpected issues.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What does the KRT version of Kawasaki mean?

1. The Kawasaki 400 KRT version is a specific model, known as the Kawasaki Ninja 400, a small-displacement sports bike produced in Japan. 2. The 2020 Kawasaki models will feature three color options: KRT Edition (Lime Green), Black x Grey, and White x Black. Notably, the Kawasaki racing team won their first championship in 26 years at the 2019 "Coca-Cola" Suzuka 8 Hours Endurance Road Race (the 42nd annual event) held on July 28th, with the competing bike sporting the KRT livery. This is the color scheme of the Ninja 400 KRT model, where the "400" characters on the side covers resemble those on the Ninja ZX-10RR from the Superbike World Championship.
18
0
Share

What to Do When Your Car Electronic Key Fails?

Here are the solutions for a malfunctioning car electronic key: 1. First, eliminate nearby interference sources. Wireless communication devices and large LED lights around the vehicle can interfere with the electronic key's signal, causing it to malfunction. Turn off all electronic devices before using the key again. 2. Check if all car doors are properly closed. The issue might be due to an open or improperly closed door, trunk, etc. 3. The battery might be dead and needs replacement. You can visit a nearby repair shop or an authorized 4S dealership for battery replacement. 4. Always store the electronic key properly. Consider purchasing a dedicated protective case to safeguard the key and take necessary preventive measures.
19
2
Share

How to Align the Timing Marks for Chery Flagcloud 2?

Rotate the crankshaft to align the mark on the transmission with the scale line on the flywheel. Rotate the camshaft. Align the mark on the timing gear of the camshaft with the bottom of the valve chamber. Locate the driving end of the oil pump shaft, and align the raised rectangular side of the driving end with the direction of the crankshaft. Insert the distributor assembly into the mounting hole and secure it. Align the rotor on the distributor with the mark on the housing, cover the distributor cap, and then plug in the ignition wires and various internal components. Install the timing belt, start the engine for inspection. If there are any issues, readjust as necessary.
5
4
Share

Where is the Kawasaki Ninja 400 produced?

After the 2021 Kawasaki Ninja 400 was first launched in its country of origin, Thailand, it has now returned to the Japanese domestic market. The main changes in the new model include the use of three new color schemes: the very popular 'Celestial Blue' and the classic 'Metallic Spark Black,' as well as the latest KRT factory team livery synchronized with the current WSBK season. Although the strikingly eye-catching 'Celestial Blue' is not available on the new Ninja 400 in China, two of the three new color schemes (KRT and black) have been synchronized domestically, which is not too far behind.
4
1
Share

What causes the battery indicator on the car dashboard to remain red?

Reasons why the battery indicator on the car dashboard remains red: Commonly, when the vehicle is stationary and the ignition is turned on, a red battery warning light appears on the dashboard. This is usually due to low battery voltage triggering the alarm. Relevant explanations are as follows: 1. First, check whether the battery voltage is within the standard range. Generally, if the voltage is below 9 volts, the battery will trigger an alarm. If possible, measure the battery voltage to ensure it is within the normal range, which is typically between 11.5 volts and 12.5 volts. 2. If the battery voltage is too low, start the engine to charge it. Secondly, inspect the battery terminals for any looseness. You can gently shake them to check for looseness or corrosion. If corrosion is present, it needs to be cleaned.
6
5
Share

What is the correct way to turn on the car air conditioner?

Correct methods for turning on the car air conditioner are as follows: 1. Air conditioning cooling. Turn on both the internal circulation and A/C (compressor switch) simultaneously to prevent external dirty air from entering the car. Turning on the internal circulation after starting the air conditioner in summer can also help the temperature inside the car drop quickly, but it should not be left on for too long. 2. Air conditioning heating. Turn off the A/C (compressor switch). In A/C mode, since the car air conditioner compressor is always in operation, it will inevitably increase fuel consumption and engine load. When using the heater, the A/C switch must be turned off to prevent the compressor from running while using the heater, which would cause additional fuel consumption.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.