How to Handle the Annual Review of Driver's License?

3 Answers
LeJayce
07/24/25 6:17pm
The method to handle the annual review of a driver's license is to bring your ID card, driver's license, four one-inch white-background color photos, and a medical examination form to the local vehicle management office. Below are the precautions for the annual review of a driver's license: 1. Required Materials: (1) Submit the original driver's license and ID card of the applicant. (2) A medical condition certificate issued by a county-level or higher medical institution or a military medical institution at the regiment level or above. (3) Four one-inch white-background color photos. 2. Eligibility Conditions: The applicant's score in the current scoring period has not reached 12 points; the applicant has no pending traffic violations; the applicant's physical condition meets the driving license requirements; the driver's license has not been legally detained, suspended, revoked, canceled, or annulled.
Was this review help?
2
3
Share
AidenFitz
08/10/25 8:31am
I've handled the driver's license annual review several times before, and the whole process is quite straightforward, just need to follow the steps one by one. Preparing the materials is key—bring your ID card and a copy, the original driver's license, and a one-inch white background photo. The medical check-up is mandatory; go to a designated hospital for a physical examination, checking vision, hearing, blood pressure, etc., to obtain a health certificate report. Then, head to the local vehicle management office to apply, fill out a simple application form, and submit it. Once the staff review and approve your materials, they will update your driver's license. I recommend doing it 1-2 months in advance to avoid last-minute rush. The cost is usually not expensive, just a few dozen yuan. The annual review ensures everyone drives safely. If you drive with an expired license, the police may fine you over 200 yuan or even suspend your license, which is not worth it. Some places offer online appointments to save queuing time.
Was this review help?
10
0
Share
Expand All
ManuelMarie
09/26/25 3:02am
Nowadays, the process for driver's license annual review has become much more convenient, mainly relying on advance preparation. The required materials include ID card, driver's license, and medical examination report. The medical check at the hospital simply tests basic physical indicators to prove you can drive safely. Then, submit the application at the DMV, fill out the form, and wait for processing. Last time I did it, it was completed within 20 minutes. It's recommended to use the appointment service to reduce waiting time. Late processing carries significant risks, not only fines but also possible demerit points affecting your record. The DMV usually has clear procedures, and you can ask the staff at the counter if you don't understand. The entire process ensures our driving ability is normal, which is crucial for road safety.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

Why does the steering wheel suddenly become lighter with no resistance feeling?

The sudden lightness and lack of resistance in the steering wheel are related to the power steering system. Currently, there are three types of power steering systems in vehicles: electric power steering, hydraulic power steering, and electro-hydraulic power steering. For vehicles equipped with hydraulic power steering, it is normal for the steering wheel to suddenly become lighter and lose its tactile feedback during acceleration. However, for vehicles with electric power steering or electro-hydraulic power steering, a sudden lightness and lack of tactile feedback in the steering wheel indicate a malfunction. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and corresponding installation clips or screw holes for the driver's airbag (DAB).
10
2
Share

How to Repair a Broken Rearview Mirror Pivot?

Repair methods for a broken rearview mirror pivot include: 1. Using specialized high-strength double-sided adhesive tape designed for rearview mirrors—simply peel off the protective strips on both sides; 2. Applying rearview mirror-specific AB adhesive, which requires mixing before use; 3. Utilizing UV-cured adhesive, which effectively bonds both plastic and metal materials. The rearview mirror is one of the critical safety components on a vehicle, aiding drivers in observing rear road conditions during reversing and monitoring the vehicle's surroundings while driving. Key considerations for adjusting the rearview mirror are: 1. Properly adjust your seating position before aligning the mirror surface; 2. For the left-side rearview mirror, position it vertically so the distant horizon is centered, and horizontally so the vehicle body occupies one-quarter of the mirror's surface area.
9
2
Share

What are the methods to increase the power of the Mazda6?

Methods to increase the power of the Mazda6 are: 1. Open the engine compartment, remove the rusted exhaust manifold, being careful to retain the previous gasket, which is the gasket between the exhaust manifold and the engine; 2. Replace it with a stainless steel exhaust manifold, install the turbo and header on the dedicated exhaust manifold, then prepare to install the intercooler piping and oil cooler piping. After installation, perform some professional adjustments. Taking the 2006 Mazda6 2.0L manual model as an example: it is a mid-size 4-door 5-seater sedan with a length, width, and height of 4670mm, 1780mm, and 1435mm respectively, a wheelbase of 2675mm, equipped with a 6-speed manual transmission, and a top speed of 211 kilometers per hour.
6
3
Share

How to Remove Rust Spots from White Car Paint?

White car paint rust spots can be removed by the following methods: 1. Clay bar: Most rust spots exist on the surface of the paint. A clay bar can be used to scrub them away. The clay bar is effective in removing stubborn stains from the car body. For white car paint rust spots, first wet the car body, then use the softened clay bar to evenly grind and wipe the rust spots, keeping the body moist; 2. Polishing; 3. Iron remover: Pour it onto the rust spots and wipe with a sponge, then rinse with clean water. Car owners should regularly maintain their vehicles, wash them promptly when dirty, and pay attention to paint care. Waxing, sealing, coating, and ceramic coating can all protect the car paint to a certain extent. Most rust spots on the car body are caused by acidic substances in rainwater carrying iron powder from the air, so it is important to wash the car body promptly after rain.
9
5
Share

How Often Should Air Compressor Oil Be Changed?

There are three scenarios for the replacement cycle of air compressor oil: 1. Mineral oil should be changed every 3 to 4 months; 2. Semi-synthetic oil should be changed every 6 to 8 months; 3. Full synthetic oil should be changed every 10 to 11 months. The oil should be changed in advance if the air compressor exhibits the following conditions: 1. The air in the location where the air compressor is placed contains many impurities; 2. The air contains corrosive substances; 3. The ambient temperature of the compressor room is high; 4. The air contains a large amount of dust. Oil is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers.
18
0
Share

Where is the transmission oil dipstick on the Santana?

The Santana does not have a transmission oil dipstick. When adding oil, unscrew the transmission oil filler plug, then unscrew the transmission drain plug to completely drain the oil from the transmission. Tighten the transmission drain plug, pour the oil into the oil press, connect the oil press hose to the filler port, and finally pump the oil press to allow the oil to flow into the transmission until it reaches the level just below the filler port. The Santana is a brand of cars produced by Volkswagen in California, USA. Its models include the Santana 87, Santana 2000, New Santana, Santana 3000, and Santana Vista Zhijun.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.