How to Handle the 4-Year Vehicle Inspection?

What are the symptoms of a broken rear shock absorber?

Symptoms of a damaged car shock absorber include: steering wheel vibration, shock absorber oil leakage, and uneven tire wear. Below are the relevant explanations: 1. Steering wheel vibration: There are many components inside the shock absorber, such as piston seals and valves. When these components wear out, fluid will flow out from the valves or seals instead of maintaining a steady flow. This will cause vibrations from the steering wheel. If driving over potholes, rocky terrain, or bumps, the vibrations will become more intense. 2. Shock absorber oil leakage: A normal shock absorber has a dry and clean outer surface. If oil is seeping out, it indicates that the hydraulic oil inside the shock absorber is escaping from the upper part of the piston rod. In this case, the shock absorber is essentially failing. 3. Uneven tire wear: Shock absorbers are all about keeping the tires even and aligned on the road. If the shock absorber is not functioning well, the tires will become uneven. The tires will start to wear unevenly, which not only makes the driving experience more inconvenient but also makes the ride very bumpy.

6

1

Share

What are the symptoms of a faulty Buick Excelle coolant temperature sensor?

The symptoms of a faulty Buick Excelle coolant temperature sensor are: 1. The engine is difficult to start when cold, with unstable idle speed, and may experience misfires or cylinder cutouts; 2. Acceleration becomes difficult, with no increase in RPM when the accelerator pedal is pressed, accompanied by black smoke and abnormal noises from the muffler. The function of the coolant temperature sensor is to convert the coolant temperature into an electrical signal, which is then input to the ECU to adjust the fuel injection quantity. During cold conditions, it increases fuel injection and adjusts the ignition timing advance. At low temperatures, it advances the ignition timing, while at high temperatures, it retards the timing to prevent knocking. It also affects the idle control valve, with the ECU controlling the idle control valve based on the coolant temperature sensor signal to increase RPM during cold starts. The Buick Excelle is a compact car under SAIC-GM Buick. Taking the 2020 Excelle 15N Manual Elite as an example, it features a 4-door, 5-seat sedan structure, a 40-liter fuel tank capacity, and a curb weight of 1070kg.

17

4

Share

What is the method for adjusting motorcycle valve clearance?

Motorcycle valve clearance adjustment method is as follows: 1. Adjustment for overhead camshaft valves: Remove the magneto cover and valve chamber cover, rotate the magneto rotor counterclockwise to align the "T" mark on its outer circumference with the mark on the engine casing. At this point, the piston should be at top dead center of the compression stroke. Then select a feeler gauge of specified thickness, insert it into the valve clearance and pull it back and forth. If slight resistance is felt, the clearance is appropriate. If there's no resistance, adjustment is needed. First use a small wrench to turn the adjustment screw while pulling the feeler gauge to sense resistance. Once the clearance is correct, tighten the adjustment nut. 2. Adjustment for side valve clearance: Side valve clearance refers to the gap between the valve stem end and the adjusting screw on the tappet. Remove the valve chamber cover and spark plug, then block the spark plug hole with your finger while stepping on the kick starter. When airflow impact is felt, the piston is in compression stroke. Insert a screwdriver into the spark plug hole and slowly step on the kick starter. When the screwdriver reaches its highest point, the piston is at top dead center. Then check and adjust the valve clearance using the same method as for overhead camshaft valve clearance inspection and adjustment.

16

2

Share

What does Audi A6 30FSI mean?

Audi A6 30FSI means: 30 refers to the g-value, which represents the g-force generated during vehicle acceleration; FSI stands for Fuel Stratified Injection technology, and Audi vehicles with the FSI badge are equipped with naturally aspirated engines. Below is an introduction to FSI: 1. The significance of FSI technology: The most notable advantage of gasoline direct injection technology is that it provides greater output power and torque while improving fuel economy and reducing emissions. Direct-injection gasoline engines employ technology similar to direct-injection turbo diesel engines, allowing fuel to be injected directly into the combustion chamber with precision control down to the millisecond. The principle of direct-injection gasoline engines features two different fuel injection modes: stratified injection and homogeneous injection. 2. The technical principle of FSI: The FSI engine utilizes a high-pressure pump to deliver gasoline through a split rail (common rail) to electromagnetically controlled high-pressure fuel injectors. Its characteristic is that variable swirl is already generated in the intake tract, forming the optimal swirl pattern for the intake airflow entering the combustion chamber, which is then propelled in a stratified filling manner to concentrate the air-fuel mixture around the spark plug located at the center of the combustion chamber.

20

5

Share

What does the AFL light maintenance on the LaCrosse mean?

AFL stands for Adaptive Front Lighting. The dashboard indicating AFL light maintenance is due to a malfunction in the adaptive front lighting system. When the AFL warning light illuminates, it is primarily caused by several reasons: the internal steering mechanism of the headlight is stuck or the drive motor is damaged; the AFL steering sensor is damaged; loose or disconnected wiring interfaces; or a short circuit to the battery in the signal circuit of the front axle sensor for the high-speed adjustment control module of the front headlights. Below are some relevant details about the LaCrosse: 1. Safety Features: The all-new LaCrosse adopts a high-strength lightweight body design, with high-strength steel accounting for up to 65% of the structure. It also comes standard with six airbags: dual front airbags, front side airbags, and side curtain airbags. 2. Powertrain: The new vehicle is equipped with an all-new 1.3L Ecotec dual-injection engine, paired with a CVT intelligent continuously variable transmission. It delivers a maximum power of 79kW and a maximum torque of 133Nm, with a combined fuel consumption as low as 4.6L per 100 kilometers.

7

0

Share

Where is the condenser of a car air conditioning system generally installed?

Car air conditioning condensers are typically located in front of the engine, right behind the front grille where it can catch incoming wind (except for rear-engine vehicles). Here is more information about car air conditioning condensers: 1. Car air conditioning condensers are usually installed at the front of the vehicle to utilize the incoming airflow while driving to cool the refrigerant in the pipes, though some condensers may be installed on the sides of the vehicle body. 2. The condenser is a component of the refrigeration system and a type of heat exchanger. It converts gas or vapor into liquid and rapidly transfers heat from the pipes to the surrounding air. The condenser operates as a heat-releasing process, resulting in relatively high temperatures.

2

5

Share

How to Handle the 4-Year Vehicle Inspection?

What are the symptoms of a broken rear shock absorber?

What are the symptoms of a faulty Buick Excelle coolant temperature sensor?

What is the method for adjusting motorcycle valve clearance?

What does Audi A6 30FSI mean?

What does the AFL light maintenance on the LaCrosse mean?

Where is the condenser of a car air conditioning system generally installed?

What are the methods for repairing car scratches?

What causes the ABS and ESP warning lights to illuminate in the BYD Song?

Why can't a C1 license drive a 7-seater vehicle?

Why Does a Newly Replaced Spark Plug Accumulate Carbon Deposits Quickly?