How to Handle Rear Wheel Skidding to the Right on Muddy Roads?

What is the horsepower of the Chang'an Benben?

Chang'an Benben is equipped with a 1.4-liter naturally aspirated engine across all models, which delivers 101 horsepower. Here are the details about the Chang'an Benben's engine: 1. The 1.4-liter naturally aspirated engine in the Chang'an Benben has a maximum torque of 1354 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque between 4000 and 4500 rpm. It features VVT technology and multi-point fuel injection, with an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 5-speed AMT transmission. 2. The AMT transmission, also known as an automated manual transmission, has a structure almost identical to a manual transmission. The AMT includes an additional control mechanism that manages gear shifting and the engagement and disengagement of the clutch. 3. The Chang'an Benben uses a MacPherson strut front suspension and a torsion beam rear suspension. Compact cars like this typically use torsion beam suspensions due to their simple structure, compact size, and minimal space requirements. The use of a torsion beam rear suspension helps maximize rear passenger space and trunk capacity.

13

2

Share

What is the difference between 1.8L and 1.8T?

The differences between 1.8L and 1.8T are as follows: 1. The 1.8T engine is a turbocharged engine equipped with a turbocharger, while the 1.8L engine is a naturally aspirated engine, which is a conventional engine. 2. The 1.8L engine is more fuel-efficient than the 1.8T. 3. The 1.8T has stronger power output than the 1.8L but requires higher maintenance costs. For daily city commuting, the 1.8L is sufficient to meet needs; if you frequently drive long distances or on highways, it is recommended to choose the 1.8T. 4. When the turbo of the 1.8T engine is engaged, its maximum power output is 1.5 times greater than that of the 1.8L engine.

15

4

Share

Can You Add 92 Gasoline When 95 Gasoline Is Not Used Up?

You can add 92 gasoline when 95 gasoline is not used up. There is no adverse effect on the car and the engine itself, but due to the insufficiently high design compression ratio, the characteristics of 95 gasoline cannot be fully utilized, leading to "delayed combustion" and increased fuel consumption. Below is extended information about gasoline: 1. The fundamental difference between 95 gasoline and 92 gasoline lies in their different octane values and the different anti-knock agents added. 95 gasoline has a slightly higher proportion of anti-knock agents compared to 92 gasoline. 2. The quality of the two types of gasoline is exactly the same, and there is no difference in cleanliness or other aspects. The only difference is the amount of anti-knock agents added, designed to meet the different anti-knock requirements of engines with varying compression ratios.

12

2

Share

Should the steering wheel be straightened after parking?

When parking, the steering wheel should be straightened. The hazards of not straightening the steering wheel after parking are as follows: 1. Damage to the steering system. If the steering wheel is not straightened when parking, the wheels will pull the steering tie rod and prevent it from returning to its original position. At the same time, the gears of the steering wheel and the rack of the steering tie rod will remain under stress. Over time, this can accelerate the aging or deformation of these components, leading to vehicle deviation and uneven tire wear. 2. Damage to the suspension system. When the steering wheel is not straightened, the wheels will have a certain inclination angle, causing the suspension system to tilt in one direction. This can lead to the aging of the shock-absorbing rubber in the suspension system, and play will develop at the connection points of the suspension's swing arms and links. The greater the play, the more severe the wear, creating a vicious cycle.

16

1

Share

How to open the trunk of Baojun 560?

Baojun 560 trunk opening methods: You can use the remote key or operate the door lock button on the driver's side to open it. Below is an introduction to the Baojun 560: 1. In terms of appearance, it continues the Baojun family design: chrome-plated grille, headlight contours, engine hood, LED daytime running lights located below the fog lights, and LED position lights inside the headlights. The exterior mirrors integrate turn signals and come with roof racks. For the taillights, it uses light-guide LED position lights, and other lights such as brake lights and reverse lights also use LED sources. 2. For the interior, the dashboard layout is similar to the Baojun 730: featuring a 10-inch oversized touchscreen entertainment system with two control knobs. The Baojun comes with a multifunction steering wheel and a one-button start system. 3. In terms of power, it is equipped with a Baojun naturally aspirated engine: the 560 has a 101kW, 186Nm 1.8L naturally aspirated engine, paired with a 5-speed manual transmission or AMT transmission. 4. Self-positioning: The Baojun 560 is positioned as a family large SUV. Under the user-need-centered car-making philosophy, the Baojun 560 features spacious and more comfortable, practical and more affordable, safe and more reliable product characteristics, meeting users' needs for upgrading to high-quality SUV models.

3

4

Share

Why does the door keep making a clicking sound for a long time after locking?

Because the central locking system is damaged, causing abnormal noise after the door is locked. In this case, the central locking system should be repaired immediately, otherwise it will affect the use of the car. When repairing the central locking system, be sure to go to a professional institution or 4S shop, and use genuine original parts during the repair. The following is the principle of the door lock sound: When switching the motor, if the motor is blocked in a specific position, an arc will form between the brush and the commutator inside the motor, causing the brush to vibrate and produce sound. This is a common phenomenon in DC brush-type motors under suppression conditions, and the motor structure cannot completely avoid it.

3

5

Share

How to Handle Rear Wheel Skidding to the Right on Muddy Roads?

What is the horsepower of the Chang'an Benben?

What is the difference between 1.8L and 1.8T?

Can You Add 92 Gasoline When 95 Gasoline Is Not Used Up?

Should the steering wheel be straightened after parking?

How to open the trunk of Baojun 560?

Why does the door keep making a clicking sound for a long time after locking?

Why does the car remote key suddenly stop working?

Where is the engine number of Beijing Auto BJ40?

How to Replace the Battery in a Hyundai Car Key?

What Tires Fit 18-Inch Rims?