How to Handle Overdue Vehicle Inspection?

1 Answers
OMaverick
07/29/25 5:58pm
Methods for handling overdue vehicle inspection are as follows: 1. Process as soon as possible. When a vehicle exceeds the annual inspection deadline, the driver should immediately stop driving the vehicle and bring relevant documents to the local vehicle management department to complete the procedures. 2. Reapply for materials. First, handle any traffic violations, then bring the vehicle owner's ID card, vehicle registration certificate, driver's license, and compulsory traffic insurance policy to issue an overdue inspection ticket. After paying the fine at the bank, proceed with the overdue inspection procedures. The following are the penalty details: 1. Vehicles without annual inspection are not qualified to be driven on the road. If caught driving, the penalty will be 3 points deducted and a fine of 200 RMB. 2. For any traffic accidents caused by vehicles that have not undergone timely annual inspection, the involved party will bear full or primary responsibility, and the insurance company will not be liable. 3. For motor vehicles driven on the road without displaying the inspection compliance label, the vehicle will be impounded, 1 point will be deducted, and a fine of 200 RMB will be imposed. 4. The application for the inspection compliance label should be submitted to the local vehicle management department within 90 days before the expiration of the vehicle's inspection validity period.
Was this review help?
4
1
Share
More Forum Discussions

How to Handle an Expired Motor Vehicle License?

Drivers must prepare the original ID card, the original and photocopy of the vehicle license, the original insurance card, and the vehicle and vessel tax certificate, among other documents. First, obtain the annual inspection form and have it stamped; then take the stamped form to the local traffic police brigade for another stamp. Take the annual inspection form to the entrance of the vehicle inspection line for the staff to sign, then drive the vehicle into the inspection line. Take the inspection results form back to the office to make copies of the relevant documents.
2
0
Share

What Documents Should Be Brought for the First Car Maintenance?

Items required for the first maintenance include: driver's license; maintenance manual; vehicle registration book; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice, to be taken to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with the specific timing varying by vehicle, generally after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance promptly, neither in advance nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The timing for the first maintenance is calculated based on the vehicle's pickup date. There are two indicator values for the first maintenance: mileage and time. Whichever indicator is met first will be the standard. The first maintenance items include: oil change, oil filter replacement, air filter cleaning, checking various fluid levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and examining tires for damage or bulges. Time required: Completing all tasks takes approximately 2 hours. The most crucial part of the first maintenance for a new car is changing the oil and oil filter. When changing the oil, the oil filter must be replaced simultaneously. The choice of oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not wash the interior of the car with water: Many people clean their cars during holidays, using water and a cloth to scrub. It is important to note that the car's interior should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or remove them to brush with detergent, dry, and then replace. The rubber mats under the driver's floor have many holes. Water entering these areas will not dry but will flow through the holes to corrode parts like the gearbox. The best practice is to vacuum clean and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the car's antifreeze is low, it is recommended to drain the existing antifreeze and refill with the same brand from the start. Different brands of antifreeze have varying chemical properties, and their corrosion inhibitors can react negatively when mixed, leading to unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function again. Some people apply lubricant to bolts and nuts to prevent rust, but this poses a safety risk. At high speeds, lubricated bolts and nuts can loosen or even fall off, leading to driving malfunctions. Electronic fuel injection cars do not need to press the accelerator when shifting gears: The throttle control in electronic fuel injection cars differs from conventional cars. Their fuel injection control system can automatically adjust fuel supply based on the engine's temperature and operating conditions, ensuring smooth operation.
14
3
Share

What is the process for changing the location of a driver's license?

Process for changing the location of a driver's license To change the location of a driver's license, you need to bring your ID card and driver's license to the local vehicle management office to complete the transfer procedure for an out-of-town driver's license. Apply for a replacement license at the vehicle management office in your place of residence. Fill out the application form, submit the identity proof and driver's license of the motor vehicle driver, and declare your physical condition. After obtaining the physical condition certificate from the designated medical examination point by the vehicle management office, submit it together to process your driver's license transfer. Then wait to receive your new driver's license.
16
4
Share

Which Lane Should Motorcycles Use?

Motorcycles should use the right-hand motor vehicle lane on the road. Reasons for motorcycles using the right lane: According to Article 44 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," if there are two or more motor vehicle lanes in the same direction on the road, the left lane is the fast lane, and the right lane is the slow lane. Motorcycles should drive in the rightmost lane. Traffic signs indicate the speed limit, and drivers should follow the indicated speed. Motorcycle riding tips: Directional arrow markings on the road can be as slippery as ice. Slow down in advance to avoid them; if unavoidable, release the brakes before riding over them. During traffic jams or while waiting for a green light, do not get too close to the vehicle in front—maintain at least a motorcycle's length of distance. Also, avoid occupying the center of the road; instead, align parallel to the left wheel of the vehicle in front to better spot road hazards such as potholes, oil spills, or puddles.
10
4
Share

How to Reset the Maintenance Light on the Vision X6?

The specific steps to reset the maintenance light on the Vision X6 are as follows: 1. Press and hold the mute button on the right side of the steering wheel for a few seconds; 2. Once the display responds, press the mode button once to activate the menu; 3. After the menu is activated, press the mode button again to enter the menu; 4. Then select the maintenance reset option. The Vision X6 is a compact SUV under Geely Auto, with dimensions of 4546mm in length, 1834mm in width, 1715mm in height, and a wheelbase of 2661mm. In terms of exterior design, the new Vision X6 features a front grille designed with Geely's family styling, using piano black lacquer finish that integrates with the black Geely logo. It adopts a floating roof design, with distinct color separation for the pillars, creating a three-dimensional and streamlined silhouette that lowers the visual height of the vehicle.
7
5
Share

What transmission does the Touran use?

The Touran is equipped with a 7-speed dual-clutch transmission. In this transmission, one clutch controls the even-numbered gears while the other controls the odd-numbered gears. This type of transmission connects to the engine via clutch plates, resulting in relatively high transmission efficiency. The Touran is a multi-purpose van developed on the chassis of a compact sedan, with dimensions of 4395 mm in length, 1794 mm in width, and 1634 mm in height, and a wheelbase of 2678 mm. In terms of safety features, the Touran includes dual airbags, ABS, EBD, anti-whiplash headrests, door anti-collision steel beams, as well as an engine torque control system and traction control system. Additionally, three-point seat belts are provided for every passenger in the vehicle.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.