How to Handle Jing B Motorcycles Entering the Fourth Ring Road?

1 Answers
HaydenLynn
07/29/25 12:47pm
According to the relevant requirements of Beijing, all Jing B license plate motorcycles entering the roads inside the Fourth Ring Road will be treated as violating the prohibition sign instructions. In addition, motorcycles are prohibited from driving on the main roads of the Second, Third, Fourth, and Fifth Ring Roads. Non-local license plate motorcycles are not issued Beijing entry permits and are not allowed to enter areas within the Sixth Ring Road. Other non-local license plate motor vehicles entering Beijing should pay attention to the following matters: 1. Non-local vehicles that need to enter the roads inside the Sixth Ring Road must apply for a Beijing entry permit. Those entering the aforementioned areas without a permit will be treated as violating the prohibition sign instructions. 2. Non-local vehicles with a Beijing entry permit are strictly prohibited from entering within the Fifth Ring Road during peak hours. During other times, entering within the Fifth Ring Road must comply with the tail number restriction regulations (only on weekdays). In addition, when Beijing experiences heavy pollution weather or major events, odd-even license plate restrictions may be implemented citywide. In such cases, non-local vehicles, even when driving in outer suburbs (e.g., Pinggu, Daxing, Huairou, Fangshan, etc.), should comply with the restriction regulations. 3. The Beijing entry permit is valid for 7 days and can be extended once, with a maximum validity period of 12 days. If driving continues on the roads inside the Sixth Ring Road after the permit expires, it will be treated as driving without a permit.
Was this review help?
6
1
Share
More Forum Discussions

What are the steps for aligning the timing chain of the Wuling Rongguang?

The steps for aligning the timing chain of the Wuling Rongguang are as follows: 1. There are chain teeth of different colors on the chain. 2. There are also three marks on the camshaft gear, two groove marks, which should be aligned with the cylinder head plane respectively, and the dot on the gear should be aligned with the black chain link on the chain. 3. The TDC mark on the crankshaft gear should also be aligned with the mark on the oil pump. The detailed functions of the timing chain are as follows: 1. The timing chain drives the valve train of the engine, ensuring that the intake and exhaust valves open or close at the appropriate time to allow the engine cylinders to intake and exhaust normally. 2. The chain-driven method is reliable, durable, and space-saving. The entire system consists of gears, chains, and tensioning devices, among other components. The hydraulic tensioner can automatically adjust the tension force, keeping the chain tension consistent and maintenance-free for its entire lifespan, making it last as long as the engine.
16
3
Share

What is the name of the Audi A5 convertible?

The name of the Audi A5 convertible version is Cabriolet. Detailed information about the Audi A5 is as follows: 1. The new Audi A5 Cabriolet has a power output of up to 185 kW, a maximum torque of 370 N·m, and a 0-100 km/h acceleration time reduced to 6.3 seconds. Such strong and extraordinary power allows for the release of the beauty of freedom and exhilaration through a new driving experience. 2. The Audi fully automatic acoustic soft top, made of three layers of insulating and heat-resistant fibers, can be easily opened or closed at speeds of up to 50 km/h. The material thickness and body connection of the new Audi A5 Cabriolet are more optimized compared to the previous generation. 3. The new Audi A5 Cabriolet releases the beauty of freedom and exhilaration through a new driving experience. Especially compared to the previous generation, the more optimized fully automatic acoustic soft top allows drivers to easily master an extraordinary view and enjoy the pleasure of driving.
2
5
Share

How to Use the Cruise Control in a Civic?

The specific operation method for the cruise control in a Civic is as follows: 1. Press the main CRUISE button on the steering wheel. 2. Under the premise of ensuring safety, increase the speed to above 40 kilometers per hour, then press the SET button below once to activate the cruise control function. 3. After entering the cruise control state, you can adjust the speed using the up and down buttons. Press the upper button to accelerate and the lower button to decelerate. 4. If you need to cancel the cruise control state, you can step on the brake or press the cancel button on the right. Alternatively, directly pressing the main cruise button on the left can also turn off the cruise mode.
11
3
Share

Is the McLaren 570S a convertible model?

The McLaren 570S has a convertible model, which is based on the 570S Coupe and features a hardtop convertible design. The roof can be opened or closed within 15 seconds when the vehicle is traveling at speeds below 40km/h. With the convertible design, the car's weight increases by 46kg. Details about the McLaren 570S convertible model are as follows: 1. Exterior: The car is equipped with a newly designed spoiler. 2. Powertrain: The car is powered by an M838TE 3.8T twin-turbocharged V8 engine, delivering a maximum power of 419kW (570Ps) and a peak torque of 600Nm. It is paired with a 7-speed dual-clutch transmission.
19
2
Share

What Type of Engine Oil Does the RAV4 Use?

Toyota RAV4's original factory engine oil brand is Toyota Genuine Oil. If you want to change the oil during later maintenance, you can choose brands such as Shell, Mobil, Castrol, or Total. The official Toyota RAV4 manual recommends oil models of 0W-20, 5W-20, 5W-30, and 5W-40. Any oil model that meets these four specifications can be used. The viscosity of engine oil changes with temperature, so special attention must be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain viscosity better at high temperatures, which can also be understood as better lubrication performance under high temperatures. The method for changing the engine oil in a Toyota RAV4 is as follows: Wait for the engine temperature to cool down, and also allow the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine for 30 seconds to allow the oil in the main oil passage to drain. Use a special wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add new oil through the engine valve cover filler port. Generally, fill about three-quarters of a bottle. Start the engine and let it run for 5 minutes. Check for leaks around the drain plug and oil filter. If there are leaks, perform necessary repairs. After stopping the engine, pull out the dipstick and check that the engine oil level is within the standard range.
19
3
Share

What is the method for replacing the air filter on a Mercedes-Benz GLS?

Mercedes-Benz GLS air filter replacement method is as follows: 1. Open the engine hood and remove the plastic panel with the Mercedes logo. 2. Disconnect three tubes, remove the upper cover plate, and take off the filter cover. 3. Use a T25 screwdriver to remove the screws, take out the old air filter, and install the new one. 4. Reassemble in reverse order and close the engine hood. The functions of the air filter are as follows: 1. During operation, the engine inhales a large amount of air. If the air isn't filtered, dust particles suspended in the air entering the cylinders will accelerate wear on piston assemblies and cylinders. 2. Larger particles entering between pistons and cylinders can cause severe "cylinder scoring," especially in dry, sandy working environments. 3. The air filter, installed in front of the carburetor or intake pipe, filters out dust and sand particles from the air, ensuring sufficient clean air enters the cylinders.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.