How to Handle Driving School Refunds?

1 Answers
BeckettDella
07/25/25 12:28pm
If the applicant voluntarily gives up applying for a driver's license, the applicant should go to the local vehicle management office, fill out the 'Motor Vehicle Driver's License Business Withdrawal Application Form'. After review and confirmation of compliance with regulations, the acceptance counter at the municipal vehicle management office will retain the original application form and a copy of the relevant identity documents, and then proceed with the withdrawal.
Was this review help?
12
5
Share
More Forum Discussions

What does it mean when the Civic displays a low external temperature warning?

The Civic displaying a low external temperature warning is generally a reminder function, serving as a friendly prompt. It alerts the driver that the outside temperature is relatively low to prevent icy road conditions, reminding them to drive carefully, pay attention to road safety, and avoid accidents. This is not an alarm but a normal notification that does not require disabling the function. Below are relevant details: 1. Typically, when the external temperature drops below 4°C, the frost warning light will illuminate, displayed in the lower right corner of the tachometer as a snowflake symbol. The frost warning light indicates that the outside temperature has dropped significantly—a yellow light appears when the temperature is below 4°C, and a red light appears when it is below 0°C. 2. Due to the temperature drop, the car activates its anti-freeze function. If the indicator light is yellow, it signifies a minor issue, but if it is red, the car must be warmed up before driving. Additionally, it is important to note that you should not rev the engine excessively when the car is cold, as this not only wastes fuel but also damages the engine.
12
3
Share

What to Do If You Haven't Taken the Driver's License Test for Three Years?

If you haven't taken the driver's license test for three years, your test qualification certificate will be invalidated, and you will need to re-register for the test and pay the tuition fees again. According to relevant regulations, within the three-year validity period of the driving skill test qualification certificate, there are only five opportunities to take the subject two and subject three tests. If you fail to complete the tests within the validity period, the results of any previously passed subjects will be invalidated, and you must start over from the beginning. Below is relevant information about the driving skill test qualification certificate: 1. There is no time limit before subject one. The validity period starts after passing subject one. Only after passing subject one will there be a time limit, and the driving skill test qualification certificate will be issued upon completion of subject one. The validity period of the driving skill test qualification certificate is three years, and applicants must complete subject two and subject three tests within this period. 2. If you don't complete the tests, all previously passed subjects will be invalidated, and you must retake them starting from subject one. "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Article 31 states that the vehicle management office shall accept applications that meet the conditions for a motor vehicle driver's license and arrange tests according to the scheduled date.
13
4
Share

What are the reasons for difficult cold engine starting?

Difficult cold engine starting can be attributed to the following reasons: 1. Poor fuel quality: Inferior fuel has poor volatility, especially in winter when it is difficult to atomize, resulting in insufficient mixing of fuel injected into the cylinder with air, leading to starting difficulties or even failure to start. 2. Excessive carbon deposits on valves and intake pipes causing cold starting issues: Carbon deposits can absorb an appropriate amount of fuel, leading to ECU misjudgment. For instance, if the computer controls the injection of 100 units of fuel-air mixture, but only 90 units actually enter the cylinder (with 10 units absorbed by carbon deposits), even if the remaining 90 units burn completely, the required power output cannot be achieved, inevitably causing shaking. 3. Excessive carbon deposits: Carbon deposits can negatively affect the normal operation of the engine. For example, excessive carbon deposits in the combustion chamber can increase the compression ratio, creating multiple hot spots that cause pre-ignition and detonation, shortening the engine's lifespan. Carbon deposits on the valve and its seat surfaces can prevent the valve from sealing properly, leading to air leakage, difficulty in starting the engine, reduced power, and increased valve erosion.
9
1
Share

What is a Tidal Lane?

Tidal lanes are essentially variable lanes, where one or more lanes are designated with changeable traffic directions on suitable roads, primarily to accommodate peak passenger flow during morning and evening rush hours. The main implementation methods for tidal lanes include: 1. Traffic police can manually use remote controls to adjust the direction of variable lane signs based on real-time road conditions. 2. Traffic monitoring centers can observe road conditions and remotely control the display of lane direction signs. 3. For intersections with computerized signal systems, automatic identification and adjustment can be performed through the system.
14
2
Share

How to Install Wheel Arch Clips?

Wheel arch clip installation method: Use a small clip strip to hook the inner small flange, then insert it into the mounting hole of the wheel arch and fasten it. Below is an introduction to wheel arches: 1. Wheel arch, short for automobile wheel arch, refers to the chrome-plated bright strip along the upper edge of the tire, which is a semi-circular component protruding from the fender above the car tire. It is composed of half steel plate and half plastic, the same for both front and rear wheels. 2. The main function of the wheel arch is for decoration and to meet the driver's personalized needs. Additionally, from an aerodynamic perspective, the wheel arch also conforms to fluid mechanics, helping to reduce the drag coefficient.
1
0
Share

What does it mean when the engine light on the car dashboard comes on?

There are many reasons why the engine fault light stays on, the common ones are as follows: 1. The oxygen sensor plug is damaged or loose, causing the air-fuel mixture to be too lean or too rich. 2. Poor quality gasoline that does not meet standards, resulting in insufficient combustion of the air-fuel mixture during engine operation. 3. Poor engine maintenance, spark plugs, ignition coils, fuel pumps, or clogged fuel lines causing poor combustion of the engine air-fuel mixture. 4. The engine requires air for combustion. A dirty car air filter that is not cleaned regularly affects the car's air intake. Long-term clogging can seriously cause the engine fault light to come on.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.