How to Handle Driver's License Point Deduction?

2 Answers
VanAriel
07/24/25 7:57pm
The specific operation methods for driver's license point deduction are as follows: 1. Find the relevant channels for handling traffic violations locally, which are generally only processed on weekdays, so pay attention to the time. 2. Bring the ID card and driver's license of the person whose points are deducted, as well as the vehicle that was penalized. 3. After entering the hall, take a queue ticket with the ID card of the driver's license holder and wait. 4. The staff will conduct inquiries, registration, verification, take a photo of the driver's license holder, and have them sign. 5. Receive the penalty notice and pay the fine at the designated bank. More information about driver's license point deduction is as follows: 1. If the total reaches 12 points, attend a 7-day study session and pass the subject one exam to clear the points. 2. If the total reaches 24 points or more, pass both subject one and subject three exams to clear the points.
Was this review help?
12
0
Share
OwenMarie
08/11/25 10:58am
I have personal experience with the process of deducting points from a driver's license. Last year, I was penalized 6 points for running a red light and had to go through the procedure at the local vehicle management office. First, I booked a full-point learning course online. After successfully making the appointment, I brought my ID card and driver's license to check in on time. The learning typically takes two days, covering traffic safety regulations and accident case videos, which were quite interesting. At the end, there was a short exam consisting of multiple-choice questions—not difficult but required attention. Passing the exam immediately cleared the points. The entire process was free, but it took two days. My advice is not to delay after getting points deducted; handling it promptly can prevent accumulating too many points, which might lead to a license suspension. Also, pay more attention to traffic signals and speed limits while driving to minimize the chances of getting points deducted and avoid the hassle of repeated trips.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

Are Car Hanging Decorations Considered a Traffic Violation?

Judgment is based on whether the decorations obstruct the driver's line of sight. If the hanging decorations are small and do not block the driver's view, they will not be considered a violation; otherwise, they are a violation. The following are areas in the car where decorations are prohibited: Airbag Deployment Areas: Items should not be placed randomly in areas where airbags deploy. When an airbag is activated, it exerts a very strong force in the moment of deployment. In the event of a vehicle accident, the forces of acceleration and deceleration are concentrated on the neck, the most vulnerable part of the human body. The deployed airbag effectively protects the heads of the occupants, reducing pressure on the neck. If sharp decorations are placed in these areas, they not only fail to protect the occupants' lives but may also cause secondary injuries. Windshield Tinting: Tinting the car windows can reduce visibility inside the car, obstructing the driver's view. This is particularly dangerous during nighttime driving and can lead to safety incidents.
20
3
Share

Do Electric Light Motorcycles Require a Driver's License?

Electric light motorcycles require a driver's license. A light motorcycle, defined as a motorcycle with an engine displacement of 50ml or less and a maximum design speed of 50km/h or less, requires an F-class driver's license, which can be applied for at the local vehicle management office in accordance with the law. Below is an introduction to some of the subjects for obtaining a motorcycle driver's license: Subject 1 Exam: The Subject 1 exam for a motorcycle driver's license consists of only 50 questions. The first 20 questions are multiple-choice, and the remaining 30 are true/false questions, with a full score of 100. A passing score is 90 or above. Subject 2 and Subject 3 Exams: The exam items include pile test, slope parking and starting, and passing a single-plank bridge. During the exam, there are invigilators and police vehicles supervising. The training and exam for Subject 3 are completed simultaneously with Subject 2, without a separate exam. If you fail the exam the first time, you can retake it once for free.
7
1
Share

Can a Tire Be Patched in the Same Place Twice?

Each tire brand has different standards. Some brands allow only one patch, while others permit two, but under very strict conditions, such as requiring that the two damaged areas not be too close to each other. Here are some daily tire maintenance tips: Avoid Hard Braking: Maintain a safe distance when driving at high speeds to avoid unnecessary or frequent braking, which can damage the tires. Pay attention to the tread depth of the tires. Worn-out tires have reduced friction with the road, leading to longer braking distances, so avoid high-speed driving. Properly Control Tire Pressure: Regularly check the tire pressure. Both overinflation and underinflation can cause irregular wear, cracking at the base of the tread grooves, broken cords, ply separation, and even tire blowouts. If you plan to drive at high speeds continuously, it's advisable to increase the tire pressure by 5% to 10% above the standard level. Additionally, tire pressure rises due to increased temperature after driving, so do not release air at this time.
14
4
Share

How to Handle Making an Illegal U-Turn Due to Road Flooding?

If a vehicle makes a U-turn because it genuinely cannot pass due to road flooding, it does not count as a traffic violation. You can explain the situation at the service center or the traffic police station's violation processing window, and the violation record will be canceled after verification. Scenarios where U-turns are prohibited are as follows: U-turns are prohibited where there is a 'No U-Turn' or 'No Left Turn' sign: If there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. A U-turn is essentially an extension of a left turn, so if there is a sign prohibiting left turns at an intersection, U-turns are also prohibited there. U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. If U-turns are permitted at an intersection, you must cross the crosswalk before making the U-turn; you cannot make the U-turn on the crosswalk. U-turns are prohibited when there is no left-turn lane: Even if you are in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited from the second left-turn lane: When a vehicle is in the second left-turn lane, it cannot make a U-turn. In the absence of any signage, vehicles can only make U-turns from the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, you must wait for the green light and cross the stop line before making the U-turn. U-turns are prohibited on highways: Crossing the central divider to make a U-turn on a highway is illegal and will result in a fine and 12 demerit points. If you miss an exit on the highway, continue driving to the next exit and leave the highway; never attempt an illegal U-turn out of misplaced confidence.
9
1
Share

Can You Stay in 4th Gear Within 80 km/h?

You can stay in 4th gear within 80 km/h, but it may cause some damage to the car. Since the speed of 80 km/h in 4th gear does not match the gear position, driving at high speed in a low gear will increase the engine's RPM, leading to accelerated engine wear. Below is an introduction to gear positions and their corresponding speeds: 1st gear speed: Used for normal starts or climbing very steep slopes, with a speed generally around 10 km/h. 2nd gear speed: Used as a transition gear after starting or for low-speed driving, with a speed generally around 20 km/h. 3rd gear speed: Used for speeds between 20 to 40 km/h, commonly used for city driving. 4th gear speed: Used for speeds between 40 to 60 km/h. 5th gear speed: Used for speeds of 60 km/h or above.
4
5
Share

Do Sedans Need to Add Water?

Cars do not need to add water. What is commonly referred to as adding water actually means adding coolant. The engines used in cars are water-cooled engines, which rely on the continuous circulation of coolant within the engine to dissipate heat. Without coolant, the engine would overheat, which could severely damage the vehicle's performance in serious cases. Below are some precautions for using coolant: Regular Replacement: Most coolants have a validity period of two years. When adding coolant, ensure the product is within its validity period. It must be replaced regularly, typically every two years or every 40,000 kilometers driven. Taxis should replace it more frequently. Coolant Selection Principles: Choose the freezing point of the coolant based on the environmental temperature conditions. The freezing point is one of the most important indicators of coolant, determining whether it can prevent freezing. Select coolant according to the specific requirements of the vehicle. Generally, imported vehicles, domestically produced imported models, and mid-to-high-end vehicles should use permanent coolant, while ordinary vehicles can use direct-use coolant, and softened water can be used in summer.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.