How to handle car traffic violations on the phone?

Which is More Prone to Carbon Buildup: Multi-Point Fuel Injection or Direct Injection?

Comparing direct injection and multi-point fuel injection, direct injection is relatively more prone to carbon buildup. Although both direct injection and fuel injection generally face carbon buildup issues, direct injection is more pronounced. However, with technological advancements, this problem is expected to be gradually overcome. Below is an introduction to direct injection and multi-point fuel injection: 1. Definitions of Direct Injection and Multi-Point Fuel Injection: Multi-point fuel injection engines have injectors installed on the intake pipe of each cylinder, meaning fuel is injected into the cylinder from multiple points. Direct injection engines have injectors installed inside the combustion chamber, allowing fuel to be directly injected into the cylinder's combustion chamber, while air enters through the intake valve to mix with the fuel and form a combustible mixture. 2. Differences Between Direct Injection and Multi-Point Fuel Injection: Multi-point fuel injection technology is still relatively mature, and due to its simple structure, maintenance is not necessarily very difficult. Direct injection engines have a more complex structure, and the technology has not yet reached a mature stage of development. Combined with the significant carbon buildup issue, multi-point fuel injection still has an advantage in terms of service life.

18

0

Share

Which cars have the inverted 7 logo?

Luxgen is an automotive brand jointly launched by 'Dongfeng Motor' and Taiwan's largest automobile company 'Yulon Group'. In Luxgen's annual production project of 120,000 vehicles, the first batch of production plans includes three Chinese brand vehicles: an SUV, an MPV, and a sedan. Below is more information about these three models: 1. The first model will be an SUV equipped with a 2.0-liter turbocharged gasoline engine. 2. The second is an MPV equipped with 2.0-liter and 2.2-liter turbocharged gasoline engines. 3. The third model is planned to be a sedan with a 1.5-liter engine. Pure electric vehicles will also be introduced in the future.

12

5

Share

Idle Vibration After High-Speed Driving?

The reasons for car idle vibration after high-speed driving are as follows: 1. Dirty throttle or excessive carbon deposits on the fuel injector: When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an excessively lean mixture during cold start, making it difficult to start. Under such conditions, the engine will only start easily once the carbon deposits are saturated with gasoline. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the cylinder by the engine's vacuum suction force for combustion, making the mixture too rich. The engine's combustible mixture alternates between being too lean and too rich, causing idle vibration after cold start. 2. Poor oil quality: Due to prolonged high-speed driving, the oil becomes increasingly thin and fails to provide lubrication, leading to engine vibration.

7

5

Share

Does the CC consume engine oil?

In the early stages, the Volkswagen CC does not consume engine oil, but in later stages, it depends on maintenance and engine performance wear. Excessive consumption can lead to engine oil burning issues. Too much engine oil loss can affect the vehicle's performance and driving experience. Burning engine oil may cause the following phenomena: 1. Carbon deposits in the combustion chamber, causing the piston rings to stick and resulting in poor sealing. 2. Sludge formation in the lubrication system, which can block the oil return holes of the oil rings and weaken oil scraping performance. 3. Wear between the pistons and cylinder walls. 4. Corrosion and aging of valve seals, leading to sealing failure.

9

5

Share

What Are the Effects of a Car Sitting Unused for a Long Time?

Leaving a car unused for an extended period can have the following effects: 1. Oil seal failure and aging: When a car is not used for a long time, the contact force around the oil seal becomes uneven, causing parts to deform and eventually become unusable. Additionally, failed or aged oil seals can lead to oil leaks. 2. Deterioration of engine oil or other fluids: Organic substances in the car cannot be stored for long periods, as they may mix or deteriorate. 3. Brake system issues: If the car remains in a braked state for too long, the brake pads and discs may fuse together, resulting in brake system failure.

17

3

Share

What grade of gasoline should a Ford Mondeo use?

Ford Mondeo is equipped with a turbocharged engine, and it is recommended to use 95-octane gasoline. Here are some related introductions about gasoline: 1. Generally, the fuel tank cap of a car will indicate the gasoline grade that the car uses. You should refuel according to the indicated grade and must not use gasoline with a lower octane rating than required. 2. If the car is equipped with a turbocharged engine, it mostly uses 95-octane gasoline or even higher. 3. Turbocharged engines have a higher compression ratio and require gasoline with higher stability. 4. 95-octane gasoline has relatively high stability and is relatively cheaper, making it the preferred choice.

14

2

Share

How to handle car traffic violations on the phone?

Which is More Prone to Carbon Buildup: Multi-Point Fuel Injection or Direct Injection?

Which cars have the inverted 7 logo?

Idle Vibration After High-Speed Driving?

Does the CC consume engine oil?

What Are the Effects of a Car Sitting Unused for a Long Time?

What grade of gasoline should a Ford Mondeo use?

What does R8 mean?

Can Generator Oil and Automotive Oil Be Used Interchangeably?

How to Put the Car Oil Dipstick Back?

Where is the frame number of Luyuan electric vehicle?