How to Handle Car Shipping?

Which components need to be replaced in a flooded vehicle?

Flooded vehicles require replacement of the following components: 1. Engine: If the vehicle did not stall or hasn't been started after water ingress, replace the engine oil, oil filter, air filter, and sealing rings during the engine component disassembly for water drainage. If the engine stalled or was restarted, in addition to the above components, major engine repairs may be necessary including connecting rod replacement depending on the situation. 2. Transmission: Transmission fluid and transmission filter. 3. All vehicle fluids: All vehicle fluids including engine oil, coolant, power steering fluid, brake fluid, etc. must be completely replaced if severely submerged. 4. Bearing components: If floodwater reached the engine hood and immersion duration was prolonged, it's recommended to replace all bearing components to prevent later rust-induced noise or damage, such as alternator, AC compressor, wheel bearings, etc. 5. Wiring harnesses: For vehicles submerged for several days, it's advisable to replace all wiring harnesses completely, including electrical component harnesses for motors, audio systems, AC control panels, ABS modules, etc.

20

3

Share

What to Do When the Motorcycle Carburetor Doesn't Draw Fuel?

Check whether there are issues with the fuel tank switch, suction pipe, and the intake pipe between the carburetor and the engine. Below are the relevant details: 1. Carburetor: It is a passive fuel supply system for motorcycles, and its atomization effect directly affects the combustion state of the vehicle, which in turn impacts the acceleration performance. Therefore, many instances of weak acceleration in motorcycles are directly related to this system. 2. Negative Pressure Type: The fuel tank switch of a motorcycle is of the negative pressure type, requiring the engine to be running (rotating) to draw fuel. After the engine is shut off, the fuel tank switch automatically cuts off the fuel supply. If the fuel tank switch is damaged or its suction pipe is aged and leaking, it can cause the carburetor to fail to draw fuel. You can remove the suction pipe and suck on it with your mouth. If the fuel tank switch is not damaged and the suction pipe is not leaking, fuel will flow from the fuel tank switch's pipe into the carburetor. If the carburetor is not spraying fuel (air-fuel mixture) into the cylinder, it is mostly due to a clogged carburetor, which can be resolved by thorough cleaning and adjustment.

14

5

Share

What is the normal cylinder pressure for a Tiida?

Tiida's normal cylinder pressure is 11bar. The lower part of the cylinder block where the crankshaft is installed is called the crankcase, which is divided into the upper crankcase and the lower crankcase. The upper crankcase is cast integrally with the cylinder block, while the lower crankcase is used to store lubricating oil and seal the upper crankcase, hence it is also known as the oil pan. Below are the functions of the crankcase: 1. The crankcase is the most important component in the engine. It bears the force transmitted by the connecting rod and converts it into torque, which is output through the crankshaft to drive other engine accessories. 2. The crankcase is subjected to the combined effects of centrifugal force from rotating masses, periodic gas inertia forces, and reciprocating inertia forces, causing the crankshaft to bear bending and torsional loads. 3. It prevents oil deterioration and leakage from the crankshaft oil seal and crankcase gasket.

4

5

Share

Does Mercedes-Benz have a Sport mode?

Mercedes-Benz has a Sport mode. The following is a detailed introduction to the vehicle driving modes: 1. Eco mode. In this mode, the fuel injection volume and transmission control module are managed by the computer, which adjusts to the most fuel-efficient driving style. This mode offers the lowest fuel consumption but also the least power. Additionally, in this mode, as the transmission control module is computer-controlled, the throttle response becomes less sensitive, and the engine reaction is slower. 2. Comfort mode. Also known as standard mode, it balances power and fuel efficiency. In this mode, power output and air conditioning settings are optimized for energy saving, making it most suitable for everyday driving. 3. Sport mode. This mode is generally used in road conditions requiring higher power output. When switched to this mode, the battery's energy output increases significantly in a short time, and the traction control system and stability control system reduce their intervention in driving operations. As a result, the vehicle's response becomes quicker, and steering operations become more pronounced. This mode offers the highest fuel consumption but also the most powerful performance. 4. Snow mode. This mode primarily works by suppressing the vehicle's torque to reduce wheel spin and skidding when driving on snowy surfaces.

10

5

Share

Is the Civic from GAC Honda or Dongfeng Honda?

The Civic is a model under Dongfeng Honda, while the well-known Accord and Fit belong to GAC Honda. Relevant details are as follows: 1. 1.0-liter turbocharged engine: The Civic is a compact car equipped with two engines, one being a 1.0-liter turbocharged engine and the other a 1.5-liter turbocharged engine. The 1.0-liter turbocharged engine is a three-cylinder engine with a maximum power of 92 kW, a maximum torque of 173 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed ranging from 2000 to 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 2. 1.5-liter turbocharged engine: The 1.5-liter turbocharged engine has a maximum power of 130 kW, a maximum torque of 226 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed ranging from 1800 to 5500 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a CVT transmission.

8

0

Share

Where is the Buick trunk switch located?

Buick Excelle's trunk switch is located on the remote key. Press the trunk button twice consecutively to open it, or press the button on the driver's side door trim panel to open the trunk. Relevant details are as follows: 1. Exterior: The Buick Excelle XT features a sculpturally elegant design infused with stylish sports car elements and dynamic lines. The Buick signature wrap-around integrated cockpit design concept centers on the driver with a sporty interior style. The two-tone dashboard adds an extra touch of sporty excitement. Drawing inspiration from the Riviera "Buick Future" two-door concept coupe's design philosophy, the Buick Excelle XT incorporates fashionable sports car elements and dynamic lines into its sculptural elegance, reinterpreting Buick's new generation of dynamic and fluid design language, thereby pioneering a new trend for five-door coupes in the mid-size car market. 2. Brand: The Excelle not only perfectly embodies the innate spirited temperament, crisp and bold lines, and driving experience of this five-door coupe but also reflects the "talent and wisdom" and the "daring to think and act, decisive and straightforward approach" of the new generation of striving youth. The name "Excelle" injects new contemporary meaning into the Buick brand spirit.

2

Share

How to Handle Car Shipping?

Which components need to be replaced in a flooded vehicle?

What to Do When the Motorcycle Carburetor Doesn't Draw Fuel?

What is the normal cylinder pressure for a Tiida?

Does Mercedes-Benz have a Sport mode?

Is the Civic from GAC Honda or Dongfeng Honda?

Where is the Buick trunk switch located?

What are the consequences of refueling at private gas stations?

Why are there so few people driving the SLS AMG?

How to Replace the Cabin Air Filter in Haval M6?

How to manually match tire pressure for Great Wall H6?