How to Handle an Overdue Vehicle Inspection?

What Causes a Car to Shake After Driving Through Deep Water?

After driving through accumulated water, significant shaking in the car is mainly due to a small amount of water entering the high-voltage wires, leading to poor ignition. Below are the correct methods for driving through water: 1. Assess the depth of the water: If the water does not exceed half the height of the wheels, it is safe to proceed; otherwise, it is not advisable to continue driving. 2. Use snow mode: After entering a waterlogged section, slow down and proceed cautiously. For automatic transmission cars, it is best to use first gear and preferably engage snow mode to prevent wheel slippage. 3. Continuous braking: After exiting the waterlogged section, apply the brakes several times in succession to evaporate the moisture from the brake discs, ensuring the car's braking performance is not affected.

5

0

Share

Does a Leaking Windshield Require Glass Removal?

No, glass removal is not necessary. Relevant information is as follows: Tools needed for leak repair: windshield adhesive, pry tools, cloth, and clean water. Repair steps: If water leakage occurs below the windshield, remove the wiper arms and cowl cover. Clean the joint area with water and a cloth to remove dirt and debris, then use an air gun to dry it thoroughly. Apply windshield adhesive to the joint. If the leak is from the top, clean the surrounding area and apply adhesive. Alternatively, sealing tape can be used. Note: If the windshield shatters while driving, reduce speed, move out of traffic lanes calmly, avoid sudden steering, and minimize braking. Solutions for windshield leaks: Leaks without glass breakage are usually caused by damaged seals, adhesive, or corroded metal frames. In such cases, remove the windshield, clean off old sealant, repair damaged areas, and reinstall with new sealant. Ensure waterproofing; avoid driving until sealant fully dries. During glass replacement, ensure proper sealing. If leaks persist, clean the upper edge thoroughly, dry completely, and seal with adhesive. Avoid car washes for three days after sealing. Typically, cleaning the leak area and applying white windshield adhesive resolves the issue. If problems continue, glass replacement may be necessary—request extra sealant during installation.

18

4

Share

Why does the Model 3 lose battery power when exposed to the sun in summer?

Model 3 loses battery power when exposed to the sun in summer due to the power consumption of the overheat protection feature. Below are some relevant details about the Model 3: 1. Powertrain: The Model 3 is available in both rear-wheel-drive and all-wheel-drive versions. The all-wheel-drive version is equipped with dual motors, while the rear-wheel-drive version has a single motor. The all-wheel-drive Model 3 has a combined motor power of 340 kW and a combined torque of 639 Nm. The rear-wheel-drive version has a maximum motor power of 202 kW and a maximum torque of 404 Nm. 2. Vehicle Positioning: The Model 3 is a mid-size electric vehicle with a wheelbase of 2875 mm. Its length, width, and height are 4694 mm, 1850 mm, and 1443 mm, respectively.

17

2

Share

How to Cancel the Exclamation Mark in Volkswagen Cruise Control?

This is likely due to a malfunction in the cruise control system, requiring a check of the wiring, especially the lines near the cruise control switch. If you're not knowledgeable about this, it's best to seek professional assistance. To cancel the current cruise control speed in a Volkswagen, there are three methods: press the brake pedal, press the cancel button, or press the OFF button. This will deactivate the current cruise control. Below are precautions for using cruise control: 1. Rainy and snowy weather: Road surfaces are slippery, and conditions can change rapidly, making cruise control unsuitable. It's also not advisable to use cruise control on other complex road sections; it can be turned off or canceled in advance. 2. When exiting a curve normally: It's necessary to apply appropriate throttle to provide greater steering force. However, in cruise control mode, the vehicle automatically maintains a constant speed, with the throttle controlled by the onboard computer, which can pose risks when driving through curves. In such situations, cruise control is also not recommended.

18

0

Share

At what RPM should the Ninja 400 shift gears?

Generally, the shifting RPM for a car can be chosen between 1500-2500 rpm. Below is a related introduction to car RPM: Introduction to car RPM: Vehicle RPM refers to the rotational speed of the car's engine, which is the number of revolutions per unit time that an object moving in a circular path makes around the center of the circle. The function of car RPM: It promptly reflects the operating condition of the engine, allowing the driver to better coordinate with the transmission gear and throttle position, keeping the car in good working condition, reducing consumption, and extending the engine's lifespan. The RPM of the engine relates to the number of work cycles per unit time or the effective power output of the engine, meaning the engine's effective power varies with different RPMs. The car's tachometer is located on the instrument panel, symmetrically placed with the speedometer.

9

2

Share

What Causes a Truck to Emit Black Smoke?

The reasons for a truck emitting black smoke are as follows: 1. Wear of piston rings, cylinder liners, etc.: After the valves, piston rings, and cylinder liners wear out, it leads to insufficient compression pressure and oil entering the combustion chamber. This alters the normal air-fuel mixture ratio at the end of the compression stroke, causing the fuel to burn under oxygen-deficient conditions. The combustion process tends to produce carbon deposits, and the exhaust forms large amounts of black smoke. 2. Excessive fuel supply: An excessive fuel supply increases the amount of oil entering the cylinder, resulting in a fuel-rich mixture that burns incompletely. Additionally, excessive workload, poor fuel quality, and low operating temperature can also cause black smoke emissions. 3. Changes in combustion chamber shape: The shape of the combustion chamber may degrade due to manufacturing quality or long-term use, leading to excessive or insufficient compression clearance or incorrect piston positioning. These changes affect the combustion chamber's shape and volume, impairing the quality of the fuel-air mixture and worsening fuel combustion conditions.

15

1

Share

How to Handle an Overdue Vehicle Inspection?

What Causes a Car to Shake After Driving Through Deep Water?

Does a Leaking Windshield Require Glass Removal?

Why does the Model 3 lose battery power when exposed to the sun in summer?

How to Cancel the Exclamation Mark in Volkswagen Cruise Control?

At what RPM should the Ninja 400 shift gears?

What Causes a Truck to Emit Black Smoke?

What are the drawbacks of installing front radar?

Will the Motorcycle Test Still Be Conducted in the Rain?

What are the differences between the Wuling Hongguang New Truck Double Row 1.5 and 1.8?

Does Cadillac Have New Energy Vehicles?