How to Handle Almost Hitting the Corner When Reversing into a Parking Space?

What is the solution for oil burning in the second-generation EA888 engine?

If it is the second-generation EA888 engine, the phenomenon of oil burning is difficult to completely resolve as it is a common issue. You can try replacing the oil separator with the improved version from Volkswagen's original factory and switch to 5W40 or 0W40 engine oil that meets Volkswagen's 502/505 standards. After these changes, the situation should improve significantly. Methods to prevent oil burning are as follows: Method 1: Use engine oil that meets the technical requirements specified for the vehicle. Many car owners never check the vehicle manual and, after years of driving, still do not know what quality and viscosity grade of oil their vehicle requires. There is a lot of randomness in oil usage. When using engine oil, pay attention to both quality and viscosity indicators. The quality indicator means choosing SL grade or higher, and the viscosity indicator must strictly follow the specifications in the car manual—neither too low nor too high. Method 2: Avoid frequent rapid acceleration and prolonged high-speed driving. When the engine runs at very high speeds, it can easily break the lubricating oil film, leading to poor lubrication and dry friction in rotating parts. If this becomes a regular practice, it can cause abnormal engine wear and result in oil burning. Therefore, maintaining an economical speed is one of the best ways to prevent oil burning. Method 3: Ensure the engine oil is filled according to specifications. If the oil level exceeds the midpoint, ask the mechanic to remove the excess oil. Additionally, check the oil level the next morning before driving for an accurate measurement. Method 4: If oil burning is detected, visit a repair station as soon as possible for inspection. If the issue is due to engine faults (such as poor piston ring sealing, leaking valve seals, or leaking cylinder gaskets), promptly visit a repair station for diagnosis and early repair.

17

3

Share

What is the reason for the Elantra's anti-theft light not illuminating and the car not starting?

Elantra's anti-theft light not illuminating and the car not starting could be due to the following reasons: 1. Locking: Determine if the anti-theft system is locked. 2. Starting: Check if the starting system is functioning (whether the starter motor is operating). If the starting system is abnormal, turning slowly, inspect the battery voltage, check for starter motor faults, and determine if the engine has excessive resistance. If the starter motor does not operate, inspect the starter motor's circuit and electromagnetic switch. 3. Ignition System: If the starting system is normal, check if the ignition system is functioning properly. If the ignition system is abnormal, inspect the ignition system's circuit, check if the crankshaft position sensor and camshaft position sensor are functioning correctly, and examine the ECU's power supply and grounding. 4. Fuel Supply System: If the ignition system is normal, check if the fuel supply system is functioning properly.

5

4

Share

Why is the car engine buzzing?

The buzzing noise from a car engine may be caused by worn or loose wheel bearings or uneven tire wear. Below is an introduction to engines: 1. Introduction: An engine is a machine that converts non-mechanical energy into mechanical energy. 2. Classification: Engines include internal combustion engines (reciprocating piston engines), external combustion engines (such as Stirling engines, steam engines, etc.), jet engines, electric motors, etc. 3. External combustion engine: An external combustion engine refers to an engine where the fuel is burned outside the engine. 4. Internal combustion engine: An internal combustion engine, also known as a reciprocating piston engine, differs from an external combustion engine in that the fuel is burned inside the engine. There are many types of internal combustion engines, with gasoline engines and diesel engines being the most common examples.

5

0

Share

Why can't the car key turn and the engine won't start?

The reason why the car key is inserted but cannot be turned and the engine won't start is that the steering wheel lock is jamming the key. Here are other possible reasons and solutions: 1. Solution when the steering wheel is locked and the car key cannot turn: Hold the steering wheel with your left hand and gently shake it while simultaneously turning the key left and right with your right hand to unlock it. 2. The steering wheel lock is a simple anti-theft feature: After the car is turned off, rotate the steering wheel from the straight position to one side (usually left) by a certain angle, and the steering wheel will "click" and lock into place. 3. When the steering wheel is locked, it won't move and the key cannot turn: Solution: Hold the steering wheel with your left hand and gently shake it while simultaneously wiggling the key with your right hand to unlock it.

14

3

Share

How to Repair Car Paint?

If the paint is scratched and you don't want to go for professional repair, you can purchase touch-up pens and mini spray cans for treatment. Below is some information about car paint: 1. Paint Distribution: The exterior of a car consists of 13 painted surfaces: the front and rear bumpers, the left and right front fenders, the two left doors, the two right doors, the left and right rear fenders, the front hood, the rear trunk lid, and the roof. 2. Paint Material: Car paint generally has four basic components: film-forming substances (resins), pigments (including extender pigments), solvents, and additives. The film-forming substance is the main component of the paint, responsible for keeping the pigment bright, making it durable and able to adhere to the surface, and is the substance that determines the type of paint.

1

4

Share

What happens when a car's exhaust pipe is blocked?

When a car's engine exhaust system becomes blocked, corresponding fault symptoms will appear depending on the severity of the blockage. Here is an introduction to car exhaust pipe knowledge: 1. Definition: The car exhaust bellows, also known as the car exhaust flexible hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler. It creates a flexible connection for the entire exhaust system, serving to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. 2. Material selection: Ferritic stainless steel has a small thermal expansion coefficient and high thermal conductivity. It exhibits good high-temperature oxidation resistance under repeated heating and cooling conditions, along with excellent pitting corrosion resistance.

17

4

Share

How to Handle Almost Hitting the Corner When Reversing into a Parking Space?

What is the solution for oil burning in the second-generation EA888 engine?

What is the reason for the Elantra's anti-theft light not illuminating and the car not starting?

Why is the car engine buzzing?

Why can't the car key turn and the engine won't start?

How to Repair Car Paint?

What happens when a car's exhaust pipe is blocked?

What is the FAW-Volkswagen security login password?

What does semi-trailer direction mean?

What is the length of the BMW 740 in meters?

What is the charging power of a car?