How to Handle a Stalled Automatic Transmission Vehicle

What is the difference between a motor and an engine?

The differences between a motor and an engine are: 1. Different performance: A motor is an electrical device; an engine is an internal combustion engine. 2. Different working principles: A motor operates using electromagnetic principles and can convert other forms of energy into mechanical energy to output speed and torque; an engine uses high-pressure gas generated by fuel combustion to push pistons and perform external work, constituting a complete power output system. A motor can also be called a starter, where electrified coils rotate under magnetic force, driving the starter rotor to spin. Motors are mainly categorized into hydraulic motors, high-speed motors, and vane motors. High-speed motors are compact, lightweight, and simple in structure, and are less sensitive to oil contamination, but they have low efficiency and poor low-speed stability. The engine is the core component of a vehicle, providing the power needed for its operation by converting the thermal energy released from fuel combustion into kinetic energy to propel the car.

17

2

Share

How to reset the oil inspection due reminder on an Audi A4?

Audi A4 oil inspection due reset method: 1. With the engine turned off, press and hold the short trip counter reset button located below the tachometer; 2. Turn the ignition switch to ON position while still holding the reset button, then release it when the SERVICE indicator appears on the display; 3. Pull out the minute button on the clock and turn it clockwise until the mileage display appears; 4. Turn off the engine to complete the reminder reset. The Audi A4 is a B-segment vehicle manufactured and marketed by FAW-Volkswagen, available with 1.8T, 2.4T and 3.0T engine displacements.

3

1

Share

What Are the Car Maintenance Items?

Car maintenance items include: 1. Oil change; 2. Air filter replacement; 3. Transmission fluid replacement; 4. Replacement of wear parts; 5. Tire maintenance; 6. Interior and exterior cleaning; 7. Vehicle chassis inspection; 8. Vehicle lighting inspection; 9. Exterior inspection. Maintenance items and intervals are usually determined based on mileage, with the aim of achieving optimal performance and extending the vehicle's lifespan through regular maintenance. Different manufacturers and vehicle models may have varying maintenance items and schedules, so it's important to refer to the vehicle's maintenance manual for proper care and upkeep.

3

5

Share

What is the difference between China V and China VI gasoline?

The differences between China V and China VI gasoline are: 1. Different sulfur content: The upper limit of sulfur content in China V gasoline is 10 mg per kilogram, while in China VI gasoline it is 50 mg per kilogram; 2. Different particle numbers: China V gasoline vehicles have a 25% higher NOx emission standard compared to China VI. China V was implemented on January 1, 2017, while China VI emission standards will include two phases, China 6a and China 6b, with new light-duty vehicle registrations required to meet China 6a emission standards starting from July 1, 2019. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum distillation or cracking, and can be used as fuel.

18

3

Share

What to Do When the Car Key Won't Open or Start the Car?

Solutions for when the car key won't open or start the car: 1. Use the spare mechanical key to unlock the door; 2. If the remote key indicator light is off, replace the remote key's battery. Reasons why the car key won't open or start the car: 1. The car steering wheel is locked; 2. The gear is in the wrong position; 3. The battery is dead. Precautions for using smart keys: 1. Do not place them together with electronic devices; 2. Avoid rough handling or throwing; 3. Do not let the key come into contact with metal items or be covered by them, as this may cause malfunction; 4. Do not use the wrong battery; 5. Do not leave the spare key inside the car.

5

4

Share

Do You Need to Press the Brake When Starting a Manual Transmission Car?

Whether you need to press the brake when starting a manual transmission car depends on the situation: 1. On flat ground, you don't need to press the brake; 2. When starting on a slope, you should press the brake to prevent the car from rolling back. A manual transmission car requires manually shifting the gear lever to change the gear engagement position inside the transmission, altering the gear ratio to achieve shifting. The gear lever can only be moved when the clutch is pressed. Correct method for starting a manual transmission car on flat ground: 1. Adjust the seat before starting to ensure your feet can comfortably and firmly press the clutch, brake, and accelerator; 2. Engage first gear, press the clutch all the way down, and place your right foot on the accelerator; 3. Slowly lift the clutch with your left foot to about halfway, and when you feel the car start to vibrate, release the handbrake promptly, then lightly press the accelerator. As the car begins to move forward, gradually release the clutch; 4. Adding a bit of throttle will successfully start the car.

8

2

Share

How to Handle a Stalled Automatic Transmission Vehicle

What is the difference between a motor and an engine?

How to reset the oil inspection due reminder on an Audi A4?

What Are the Car Maintenance Items?

What is the difference between China V and China VI gasoline?

What to Do When the Car Key Won't Open or Start the Car?

Do You Need to Press the Brake When Starting a Manual Transmission Car?

What are the differences between the BRZ and the 86?

Is It a Violation to Make a U-Turn When the U-Turn Signal Is Red?

Can the sunroof of the WEY VV6 be opened?

How to reset the maintenance light on Audi A4L?