···
Log in / Register

How to Handle 36 Points Deducted from Driver's License at Once?

6Answers
IslaFitz
07/29/2025, 09:02:01 PM

"Deducting 36 points at once will result in three types of penalties: revocation of the driver's license, temporary suspension of the driver's license, and cancellation of the driver's license. Additionally, penalties such as detention, driving ban, and fines may be imposed depending on the violation. The driver will need to participate in traffic safety education and retake the subject one exam. Only after passing these can the driver's license be restored. Cancellation of the driver's license refers to the situation where a probationary driver accumulates 12 points in a single scoring cycle, requiring them to start over by taking all subject exams again to obtain a new license. For experienced drivers outside the probationary period, deducting 12 points at once may result in temporary suspension or revocation of the driver's license, depending on the severity of the violation. The following violations will result in a 12-point deduction for motor vehicle drivers: Driving a vehicle that does not match the permitted vehicle type; driving under the influence of alcohol; operating a commercial passenger vehicle or school bus with more than 20% over the approved passenger capacity; fleeing the scene of a traffic accident without constituting a crime; driving a vehicle on the road without displaying a license plate, or intentionally covering, damaging, or improperly installing the license plate; using forged or altered license plates, vehicle registration certificates, driver's licenses, or school bus permits, or using other vehicles' license plates or registration certificates; driving a vehicle in reverse, against traffic, or making a U-turn across the central divider on a highway; stopping a commercial passenger vehicle in a highway lane; driving other vehicles at speeds exceeding 50% of the speed limit; driving medium-sized or larger passenger vehicles or hazardous material transport vehicles for more than 4 hours without rest or with rest periods shorter than 20 minutes; and driving a school bus without the proper qualifications."

Was this review help?
113
Share
SawyerLynn
08/15/2025, 02:31:37 AM

I once encountered a similar situation where my driver's license was deducted 36 points at once, usually due to serious violations like drunk driving or exceeding the speed limit by over 50%. I had to immediately stop and report to the local vehicle management office, or the consequences would have been worse. The solution was to accept penalties such as paying fines, then attend a 7-day traffic safety education course—studying traffic rules daily—and finally pass an exam to reinstate my license. During this period, I couldn't drive at all, as doing so would risk unlicensed driving. I remember the class was crowded, and when sharing safe driving tips, everyone emphasized obeying speed limits and avoiding distractions. This experience taught me that safety comes first—avoid speeding impulses. After resetting to zero points, I had to rebuild them carefully without rushing. The whole process was time-consuming but vital for life preservation.

Was this review help?
9
Share
Expand All
VanNolan
10/20/2025, 12:46:27 AM

I think this matter is quite troublesome to handle, and as an ordinary person, you need to take proactive steps. If your driver's license has been deducted 36 points, I suggest staying calm first and carefully checking the tickets to confirm the reasons. Generally, you need to promptly go to the vehicle management office to complete the necessary procedures, which might result in your license being revoked or suspended. Then, you must attend several days of traffic safety courses, diligently study the details of traffic regulations, and finally pass an exam to restore your license. The costs involved, including fines and course fees, can be significant. From experience, this often happens due to multiple violations such as drunk driving combined with wrong-way driving. The best way to avoid this is to develop good habits in daily life: never drive under the influence of alcohol, and don't speed in restricted areas. After everything is settled and your license is restored, you should also monitor the points system to avoid repeating the same mistakes. Getting home safely is what truly matters.

Was this review help?
5
Share
Expand All
MacIsla
12/03/2025, 12:17:52 AM

Losing 36 points is really tough. My approach was to contact the traffic police department immediately. They will arrange for you to attend a training course, which lasts about a week and covers traffic rule reviews and accident case studies. Your license points will only be reset after passing the exam. The entire process is straightforward: stop driving, handle the ticket, study, take the exam, and then resume driving. I recommend identifying the reason for the point deduction, such as speeding or running a red light, and remembering safe driving tips like driving slower in the rain. Afterward, the point system starts fresh, so just be more cautious when driving.

Was this review help?
18
Share
Expand All
StEloise
01/23/2026, 01:41:48 AM

As a driving enthusiast, I clearly understand the process for handling 36 penalty points due to traffic violations. First, you must confirm the penalty at the traffic management office, then suspend driving and attend a safety training course to study traffic regulations. Passing the exam restores your eligibility, and you may also need to pay fines. This usually results from serious offenses like street racing or hitting pedestrians. The best prevention strategy is to obey speed limits and drunk driving bans. The learning process enhances safety awareness, and after the incident, points will gradually accumulate—no need to rush. Before each drive, check your vehicle's condition to ensure lights and brakes are functioning properly, reducing the risk of violations.

Was this review help?
19
Share
Expand All
StephanieAnn
04/19/2026, 01:12:55 AM

For family life considerations, having 36 points deducted from your driver's license is very dangerous. The handling process is straightforward: after paying the fine, attend an education course and pass the exam to restore your license. From a safety perspective, this results from multiple violations such as speeding and not wearing seat belts. It is advised to address this promptly without delay and refrain from driving during this period. The learning materials cover topics like intersection safety and can also serve as a reminder for children's car rules, such as wearing seat belts. Afterwards, the point system resets to zero, allowing you to start anew, driving slower and steadier to ensure the safety of your whole family.

Was this review help?
7
Share
Expand All
More Q&A

Is Oil Leakage from the Rear Axle Vent Hole a Serious Problem?

Oil leakage from the rear axle vent hole is indeed a serious problem. Over 90% of oil leakage issues occur because the rubber sealing ring loses a significant amount of plasticizers and softeners due to prolonged exposure to alternating hot and cold temperatures, leading to corrosion, aging, and hardening. Initially, it may manifest as oil seepage, gradually progressing to dripping oil. Over time, the sealing ring may crack. In the past, such leaks were addressed by dismantling the engine and replacing the oil seal. However, with technological advancements, oil leakage can now be resolved without disassembly. Common causes of rear axle oil leakage in vehicles: Improper installation of the main drive gear oil seal; porous or sand-included bearing seat castings. In such cases, simply replacing the oil seal won't suffice—the bearing seat must be replaced; overfilling of gear oil, damaging the oil seal edge during half-shaft assembly; misaligned rear axle wheel hub flange connection holes, causing misalignment between the half-shaft and wheel hub, leading to repeated damage to the half-shaft oil seal; damaged inner oil seal of the rear wheel hub, causing lubricant to be thrown out from the inner wheel disc. Reasons for oil leakage under the vehicle: Poor quality, material, or workmanship of the product (parts); flawed structural design; improper high-speed assembly, unclean mating surfaces, damaged, displaced, or improperly installed gaskets; uneven tightening torque of nuts, stripped threads, or loose fasteners leading to operational failure; excessive wear, aging, deterioration, or deformation of sealing materials after prolonged use; overfilling of lubricant, excessively high oil level, or use of incorrect oil type.
112
Share

Is a Physical Examination Required for a Driver's License?

A physical examination is required when applying for a driver's license. The examination mainly includes vision tests, height and color vision checks, hearing tests, and assessments of the upper limbs, lower limbs, torso, and feet to detect any abnormalities. Before applying for a driver's license, a physical examination is mandatory to determine if the applicant meets the physical requirements for driving. Driver's License Physical Examination Process: First, go to the local People's Hospital for the examination. If the driving school has a designated hospital for physical examinations, follow the school's instructions. Bring your ID card and personal belongings, as hospitals can be crowded, so keep your items secure. The hospital will have a designated area for the examination; you can inquire at the front desk or the volunteer service desk. After the examination, the staff will provide a printed form. This form needs to be stamped at the counter, and once stamped, the physical examination is complete. Keep the examination invoice safe, as you will need to submit it to the driving school along with other documents. Each subject exam can be taken once, with one retake allowed if failed. If you do not take the retake or fail it again, the exam process ends, and you must reschedule. Within the 3-year validity period of the driving skill test permit, the number of reschedules for the subject two (parking skills) and subject three (road driving skills) exams must not exceed five each, meaning a total of ten attempts are allowed for both subjects.
114
Share

What does it mean to check the coolant level with the engine off?

The prompt to check the coolant level with the engine off indicates that the vehicle's antifreeze is low, and it is necessary to promptly inspect whether the antifreeze level is too low. If the level is too low, antifreeze should be added immediately. Only when the indicator light turns off can you continue driving. Coolant is essentially the engine's cooling water; you can add coolant, or if coolant is not available, water can be used temporarily. However, it's important to check for any leaks. If there is a leak, adding water should suffice temporarily, but ensure it's sufficient. Here is additional information: 1. Function of the cooling system: The purpose of the car's cooling system is to dissipate some of the heat absorbed by heated components in a timely manner, ensuring the engine operates at the most suitable temperature. Engine cooling systems can be either air-cooled or liquid-cooled. A system that uses air as the cooling medium is called an air-cooled system, while one that uses coolant as the medium is called a liquid-cooled system. 2. Components of the cooling system: The cooling system of a car engine is a forced-circulation liquid-cooled system, which uses a water pump to increase the pressure of the coolant, forcing it to circulate through the engine. The cooling system mainly consists of the water pump, radiator, cooling fan, expansion tank, thermostat, water jackets in the engine block and cylinder head, and other auxiliary components.
120
Share

Does the Tharu consume engine oil?

The Tharu's engine may experience some oil consumption, but this primarily applies to older models. Newer Tharu models generally have less oil consumption unless there is a vehicle malfunction. Engine oil naturally has a certain level of consumption, but excessive consumption indicates an oil-burning issue. Many factors can influence oil consumption, such as fuel quality, driving conditions, driving habits, and maintenance practices. These factors can exacerbate oil consumption in the Tharu, leading to oil burning. "Oil burning" can manifest in two ways: the first is cold-start oil burning, where thick blue smoke is emitted from the exhaust pipe during the first morning startup, disappearing after a while. The second is acceleration-induced oil burning, where large amounts of blue smoke are emitted from the exhaust pipe during hard acceleration while driving or when revving the engine while stationary. Methods to prevent oil burning in cars: Oil selection: For older vehicles with significant mileage, the gap between the piston and cylinder wall may widen. In such cases, thicker oil can be chosen to enhance sealing. Additionally, oil quality is crucial. Owners with the means should opt for qualified semi-synthetic or full-synthetic oils. Although maintenance costs may increase slightly, these oils have a longer lifespan, slower degradation, and better thermal stability and resistance to viscosity changes. Avoid aggressive driving in new cars: Generally, modern new cars do not require a break-in period, but during the first 2,000 kilometers, internal components like the engine and transmission need time to achieve optimal alignment. During this period, avoid behaviors like flooring the accelerator or high RPMs (exceeding 4,000 RPM) to prevent oil burning caused by poor internal component alignment. Regular and timely maintenance: Engine oil operates in a harsh environment, and even full-synthetic oil cannot perform well if not changed regularly. Additionally, oil filters and air filters are critical and should be replaced on schedule to prevent contaminants from entering the cylinder and causing wear.
102
Share

What to Do When the Vehicle Deviates from Direction During Braking on Icy Roads?

When you notice the vehicle deviating from its direction during braking on icy roads, avoid using emergency braking or sharp steering to evade. Instead, make full use of the engine's drag effect to decelerate or stop. The most crucial aspect of driving in snowy conditions is heightened attention—stay focused, maintain a steady speed, keep a safe distance, and utilize the engine's braking effect to reduce speed as much as possible. Here are some precautions for driving in snowy conditions: Reduce speed: Due to the extremely low adhesion of icy roads, to prevent skidding or collisions with other vehicles, drive at a reduced speed and maintain a safe distance. The longitudinal safe distance should be three times that on dry roads. Make full use of engine braking: To decelerate or stop on icy roads, rely heavily on the engine's braking effect to reduce speed. Avoid using the foot brake whenever possible. If braking is necessary, apply it intermittently and lightly, supplemented by the parking brake. Turn the steering wheel slowly on icy roads: When turning on icy roads, gradually release the accelerator pedal in advance to decelerate smoothly, then turn the steering wheel slowly. Avoid abrupt movements. If road and traffic conditions permit, increase the turning radius appropriately to turn earlier or less sharply, preventing wheel skidding. Decelerate in advance when meeting another vehicle: When encountering another vehicle on icy roads, choose a safe, wide section of the road, decelerate in advance, stabilize the steering wheel, and pass slowly on the right side. Try to maximize the lateral distance between vehicles and maintain an appropriate distance from the roadside. If necessary, stop and yield. If the meeting point is unsuitable, do not force the encounter. Depending on the road conditions, one vehicle should reverse to yield, avoiding any aggressive maneuvers. No overtaking on icy roads: Overtaking is generally not allowed on icy roads. If absolutely necessary, choose a wide, flat section with minimal snow and ice. Only overtake after the preceding vehicle has yielded and decelerated. Avoid forced overtaking or high-speed overtaking to prevent accidents.
116
Share

What to Do When Water Leaks from the Sunroof into the Area Under the Driver's Seat?

Water inside the car can be quickly dried by wiping, ventilating, or pumping it out. However, drivers should not attempt these operations themselves, as accumulated water can cause short circuits in the vehicle's electrical system. It is recommended to go to the nearest repair shop for professional assistance. Below are detailed steps for cleaning up water inside the car: Thoroughly Remove Water from the Car: If the water accumulation is solely due to rain, simply opening the car windows on a sunny day to air it out thoroughly may suffice. If water has entered the cabin, the repair process mainly involves draining the accumulated water. There are several rubber seals located at the bottom of the vehicle's chassis; opening these seals can allow the water inside the cabin to drain out. However, since the car's floor mats and other interior materials are highly absorbent, they should be removed and placed in a spacious area to facilitate evaporation. If there is still moisture inside the car, it is advisable to turn on the air conditioning and set the circulation mode to internal recirculation. This allows the moisture inside the cabin to be expelled through the air conditioning system—a very efficient dehumidification method, especially in summer. Clean and Dry Interior Items: Rain can easily bring dirt and mud into the car. On sunny days, removable interior items such as floor mats and seat covers should be taken out to air and clean. For carpets that are not too dirty, a vacuum cleaner can be used directly. For dirtier carpets, specialized cleaning agents should be applied. First, remove dust, then spray an appropriate amount of cleaning agent and scrub. Note that carpets should not be completely soaked in water for scrubbing, as this can damage the adhesive layers between different materials inside the carpet and prolong drying time, affecting usability and causing dampness inside the car. Disinfect and Thoroughly Clean: Seats and seat covers should be washed with bleach, and absorbent cotton must be replaced to prevent bacterial growth. Ozone disinfection can also be performed. The air conditioning's evaporator box should be disassembled, rinsed, disinfected, and dried. The blower should also be cleaned carefully. Additionally, perform air purification inside the car using technologies like "photocatalysis" to improve air quality.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.