How to Handle 21 Points Deducted from a C1 Driver's License?

1 Answers
MaciRose
07/30/25 8:06am
C1 driver's license holders who have accumulated 21 points must report to the original issuing vehicle management office or the vehicle management office where the violation occurred within 15 days to register for study and take a theoretical exam. Upon passing the exam, the points on the license will be cleared. If the exam is not passed, the holder must continue studying and retake the exam. Below is relevant information about point deductions: 1. If a motor vehicle driver accumulates 12 points for road traffic safety violations during the probationary period, the driving qualification for the probationary vehicle type will be revoked. 2. For drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks, if they accumulate 6 or more points but fewer than 12 points within one year of the probationary period, the probationary period will be extended by one year. If they again accumulate 6 or more points but fewer than 12 points during the extended probationary period, the driving qualification for the probationary vehicle type will be revoked. 3. If a motor vehicle driver accumulates fewer than 12 points in a scoring cycle and has paid all fines, the points will be cleared. If there are unpaid fines even though the points are fewer than 12, the points will carry over to the next scoring cycle.
Was this review help?
20
1
Share
More Forum Discussions

How to Deal with Engine Fire While Driving?

In the event of an engine fire while driving, the correct procedure is to immediately turn off the ignition, pull over to the side of the road (avoiding areas with flammable or explosive materials), attempt to extinguish the fire by spraying a fire extinguisher through gaps in the hood, and call emergency services for assistance. If the fire persists for more than three minutes without signs of abating, it indicates that the entire vehicle may be engulfed in flames. For personal safety, evacuate immediately and alert nearby individuals to prevent casualties. Should clothing catch fire during the extinguishing attempt, do not panic or run. Instead, quickly remove the burning garments and use water to douse the flames. Preventive measures to avoid engine fires include: Routine inspections: Regularly check for aging or damaged wiring and promptly address any issues at a repair shop. Vehicles over ten years old are particularly prone to spontaneous combustion and require timely maintenance. Avoid storing flammable or explosive items such as lighters or perfumes in the car, as prolonged exposure to sunlight can lead to explosions and subsequent fires. Additionally, refrain from parking the vehicle in direct sunlight for extended periods; opt for shaded areas or underground parking whenever possible.
20
1
Share

What brand are the original tires on the Accord?

Honda Accord's original tires are Michelin Primacy 225/50-R17 tires, which offer high levels of quietness and comfort, and have a very durable design. They help owners save on fuel costs, enjoy a quiet ride, and increase mileage. Below is additional information: 1. Honda Accord Technology: The Honda Accord builds on Honda's unique VTEC technology, employing direct injection, Atkinson cycle, and VTC (Variable Valve Timing Control), along with the introduction of an EGR (Exhaust Gas Recirculation) system. This improves fuel economy by 13% and increases maximum torque by 8%. The use of high-strength transmission belts enables a wide gear ratio range, providing efficient transportation. The "G-Design Shift" control technology quickly responds to the driver's demands. 2. Tire Pressure: Neither overinflated nor underinflated tires are good. Underinflated tires wear unevenly, negatively impact driving and fuel economy, and are more likely to fail when overheated. Overinflated tires make the vehicle ride harshly, increase the risk of road hazards, and also wear unevenly.
8
3
Share

What are the new regulations for cross-region vehicle file transfer of used cars?

New regulations for cross-region vehicle file transfer of used cars refer to the process where, during the transfer of ownership and relocation of vehicle files for used car transactions, the buyer can directly handle vehicle inspection and registration at the local site without the need to return to the original registration location for vehicle inspection and transfer-out procedures. This changes the process from "two registration inspections" to "one registration inspection," reducing the need for travel between two locations. Below is more information about used car file transfer: 1. Required materials: ID card, vehicle registration certificate, vehicle to be inspected, and driving license. 2. Proof: If the vehicle is jointly owned by two or more individuals (e.g., by a married couple), a notarized proof of joint ownership must be submitted; for married couples, a "Marriage Certificate" or "Household Register" showing the marital relationship can be provided. 3. Time limit: If the vehicle has exceeded its inspection validity period upon transfer, the certificate of traffic accident liability insurance must also be reviewed; for vehicles not eligible for the 6-year exemption from inspection, the vehicle safety technical inspection certificate must also be reviewed.
9
0
Share

Which Technologies in Lynk & Co 06 Are from Volvo?

Lynk & Co's chassis and engine both utilize Volvo technology, but the transmission does not. Lynk & Co is produced on Volvo's CMA platform. A comparison between the Lynk & Co 01 and the XC40 reveals that the chassis layouts of the two models are nearly identical, indicating that Lynk & Co has significantly inherited Volvo's technology from a chassis perspective. Here is more information about Lynk & Co: 1. In the future, Lynk & Co will be equipped with the VEP-4 engine, a sub-model of the Drive-E series. Those familiar with Volvo know that Drive-E is currently Volvo's mainstream engine. The new XC40 was the first to feature the Drive-E engine, and traces of this engine can also be seen in the V40. 2. The Lynk & Co 01 will also be equipped with this Drive-E series VEP-4 engine in the future. This engine boasts a maximum power of 140 kW and a maximum torque of 300 N·m, demonstrating excellent performance on paper. The fact that the engine is provided by Volvo also highlights Lynk & Co's positioning, slightly above conventional domestic vehicles.
20
4
Share

Why Not Use Titanium Alloy for Car Body Panels?

Titanium alloy is expensive, difficult to process, and too costly for body panels. It is prone to scratches, has inferior surface treatment compared to steel, and lacks comparable strength. Below are the components of car body panels: 1. Car Bumper: Comprising an outer panel, cushioning material, and crossbeam, it enhances the vehicle's appearance while absorbing and mitigating external impacts to protect the front and rear of the car body. This ensures pedestrian safety during collisions and reduces passenger injuries even in high-speed impacts, making it an excellent safety feature. 2. Car Fender (Wing Panel): Located outside the wheel area, this covering component reduces aerodynamic drag, improving stability. It also prevents gravel and debris kicked up by the wheels from damaging the chassis. 3. Car Spoiler: Primarily designed to minimize lift generated during high-speed driving, preventing rear-wheel floatation. Without it, differing air pressure above and below the car would create upward lift, wasting power and compromising safety. 4. Car Hood: Ensures engine cooling while providing sound insulation for a comfortable ride even at high RPMs. It also protects the engine bay's motor, battery, and wiring from dust and water.
13
4
Share

What car is the Bull Demon King?

Bull Demon King refers to the Toyota Supra, a sports car under the Toyota brand. The Toyota Supra is a front-engine, rear-wheel-drive two-door sports car featuring an elongated engine hood. It is equipped with three different inline six-cylinder engines: 2.0L, 2.6L, and 2.8L, delivering maximum power ranging from 111Ps to 125Ps, paired with either a 4-speed automatic transmission or a 5-speed manual transmission. In terms of body dimensions, the Toyota Supra measures 4955mm in length, 1950mm in width, and 1150mm in height, with a minimum ground clearance of 65mm. Exterior-wise, the Toyota Supra's body lines lean towards a classic style, characterized by a long front end and a short rear end, which significantly differs from the stance of the previous generation model.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.