How to Handle 12 Points Deducted from a Novice Driver's License?

1 Answers
LaGenesis
07/29/25 7:12pm
There are two scenarios for novice drivers who have 12 points deducted: revocation of driving qualification and retaking the subject one exam. Below are the details: 1. Novice drivers within the probationary period: If 12 points are deducted during this period, the driving qualification will be revoked, and they will need to reapply to a driving school. 2. Novice drivers who have passed the probationary period: The motor vehicle driver must report to the traffic management department of the public security authority at the place where the driver's license was issued or where the violation occurred within 15 days to receive seven days of education on road traffic safety laws, regulations, and related knowledge. After passing the exam, the driver's license can be reinstated.
Was this review help?
3
3
Share
More Forum Discussions

Which region does the license plate 'Su R' belong to?

Su is the abbreviation for Jiangsu Province. There is no license plate in Jiangsu Province that starts with 'Su R'. The first Chinese character on a license plate represents the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the province, municipality, or autonomous region. The second English letter on the license plate represents the prefecture-level administrative region where the vehicle is registered, which is the letter code for the prefecture-level city, district, autonomous prefecture, or league. These codes are usually assigned by the provincial vehicle management office based on the administrative divisions. Below is a related introduction to the license plate codes for various regions in Jiangsu Province: Su A Nanjing, Su B Wuxi, Su C Xuzhou, Su D Changzhou, Su E Suzhou, Su F Nantong, Su G Lianyungang, Su H Huaian, Su J Yancheng, Su K Yangzhou, Su L Zhenjiang, Su M Taizhou, Su N Suqian, Su U Suzhou supplement.
16
0
Share

How to Reset the Tire Pressure Warning on Volkswagen Magotan?

Method to reset the tire pressure light on Volkswagen Passat: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound. Release the button, and the tire pressure monitoring system will store the current normal tire pressure data, automatically clearing the previous data. Finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are three commonly used methods for tire pressure monitoring: Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between the tires, the system monitors the tire pressure. Tire Pressure Monitoring System (TPMS) Introduction: This system combines the advantages of the two aforementioned systems. It is equipped with direct sensors in two diagonally opposite tires and also includes a 4-wheel indirect system.
13
0
Share

How to Determine if a Car Needs an Oil Change?

Whether a car needs an oil change can be judged from the following aspects: 1. Observe the color of the engine oil. When the engine oil shows a noticeable color change, it needs to be replaced. 2. Use an oil test strip for observation. If abnormal phenomena are detected, the oil should be changed. Below is relevant information about engine oil: Engine oil can be divided into mineral oil and synthetic oil, with synthetic oil further categorized into full synthetic oil and semi-synthetic oil. Approximately over 95% of cars use mineral base oil. When a car engine is operating, using lubricating oil can appropriately reduce the engine's working temperature.
1
0
Share

What Causes Abnormal Noises in a Car Engine?

The main reasons for abnormal noises in a car engine are as follows: 1. If there is an abnormal noise during instant startup, but the noise disappears when the engine is idling: This issue is likely caused by a fault in the carbon brushes inside the starter motor. The working principle of the starter motor is that after being energized, the electromagnet engages the starter motor's gear with the engine's flywheel, causing them to rotate together and start the engine. Once the engine starts, the gear should quickly disengage. The abnormal noise in this case occurs because the starter motor's gear fails to disengage promptly, leading to grinding against the flywheel. Therefore, the starter motor needs to be inspected. 2. If there is an abnormal noise when the engine is idling after startup: This issue is likely caused by excessive clearance between the hydraulic lifters and valves inside the engine cylinder head. As the vehicle accumulates more mileage and ages, both the engine valves and hydraulic lifters experience wear. When the clearance becomes too large, a "ticking" noise may occur. To resolve this issue, the cylinder head needs to be disassembled to replace these two components.
19
3
Share

How to Adjust the High and Low Beams of Car Headlights?

Car high and low beams are adjusted via the light lever or knob on the left side of the steering wheel, with different methods for different vehicle models. Most cars activate the low beams by turning the lever knob one notch forward, while the high beams are activated by pushing the lever. Below is relevant information regarding the standard headlight adjustment wall reference: 1. Park the car 7.6 meters away from a wall, then turn on the headlights. The beam position can be adjusted based on the light's projection on the wall, sequentially adjusting both high and low beams. A represents the distance from the low beam to the central axis, B the distance from the high beam to the central axis, and C the distance from the low beam to the ground. 2. Adjust the height by turning the corresponding adjustment knob behind the headlight. Some headlights can be adjusted via the height switch inside the car. Generally, the low beam height for ordinary sedans should be below 70cm, while the high beam height is typically around 72cm.
17
4
Share

Fuel consumption of Geely Vision S1?

1.5L Geely Vision S1 comes with both manual and automatic transmission options. The manual version uses a 5-speed manual transmission, while the automatic version employs a CVT continuously variable transmission. Their combined fuel consumption is 5.7L/100Km and 5.9L/100Km respectively, while the actual fuel consumption is 7.85L/100Km and 9.18L/100Km. Below is information about the powertrain of the Geely Vision S1: 1. One variant of the Geely Vision is equipped with a 1.5L naturally aspirated engine, which delivers a maximum power of 109 horsepower. 2. Another variant of the Geely Vision features a 1.4T turbocharged engine, producing a maximum power of 133 horsepower.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.