How to Handle 12-Point Deduction for Driving a Scrapped Vehicle?

3 Answers
SanElias
07/28/25 12:52pm
Analysis and handling methods for the situation of receiving a 12-point deduction for driving a scrapped vehicle are as follows: 1. Situation Analysis: The motor vehicle driven does not match the vehicle type permitted by the driver's license. The motor vehicle is driven in reverse, parked, or makes a U-turn on the highway. Driving under the influence of alcohol. Fleeing the scene after causing a traffic accident. Driving a motor vehicle without displaying license plates or intentionally covering them. 2. Handling Methods: After a 12-point deduction on the driver's license, the driver must report to the local public security traffic management department or vehicle management office. This is because a driver's license with 12 points deducted requires the driver to participate in a training course and pass an examination before the license can be reinstated for driving. Otherwise, the license cannot be used.
Was this review help?
6
5
Share
DeHayden
08/11/25 5:34pm
I just heard from a friend about this - getting caught driving a scrapped car results in an instant 12-point deduction, which is a real headache as your license gets revoked without question. You'll need to report to the DMV immediately, attend traffic regulation classes where you'll spend whole days sitting in classrooms listening to traffic police explain safety knowledge. After completing the course, you must pass a theory test to get your license back. During this period, you can't drive, making daily life difficult with travel relying solely on buses or taxis. Not to mention the fines ranging from hundreds to over a thousand yuan, shrinking your wallet. I recommend checking your vehicle's status before driving - use the 12123 App or visit an inspection station to confirm your car isn't scrapped, don't risk driving old vehicles. Safety first, otherwise frequent accidents harm both yourself and others, plus your family will worry. Handle this matter early to avoid bigger troubles - only after retrieving your license can you continue enjoying the pleasure of driving.
Was this review help?
1
4
Share
Expand All
Freddy
09/28/25 7:42am
If you get 12 points deducted for driving a scrapped vehicle, it's a serious matter. Your driver's license will be revoked on the spot, and you must immediately report to the DMV to complete procedures for attending mandatory education and retesting. The entire process takes about a week, during which you can't drive – disrupting daily routines while also incurring additional fines. From experience, it's best to prioritize handling the revocation procedures promptly, as delays may lead to increased penalties or credit impact. Moreover, driving scrapped vehicles carries high risks: compromised body structures and faulty brakes significantly increase accident probability at high speeds, ranging from costly repairs to severe injuries. I always check vehicle inspection stickers and send cars for maintenance or scrapping when due – never gamble by driving unroadworthy vehicles. Adjust your mindset, regain your license after retesting, and drive responsibly thereafter.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

What does a bulb with an exclamation mark mean on a car?

Yellow bulb with an exclamation mark: This is the lighting fault indicator, indicating that there is a fault with one of the car lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. Alternatively, you can check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. The exclamation mark is a common fault indicator in cars. Besides the yellow bulb with an exclamation mark, there are four other forms of exclamation mark indicators: an exclamation mark inside a triangle, an exclamation mark inside a yellow gear, an exclamation mark inside a circled parenthesis, and an exclamation mark inside a parenthesis with a horizontal line below. Here’s a detailed analysis: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a fault with the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating a fault with the transmission or that the transmission lubricant is below the normal range. Transmission oil should be replaced promptly. Brake System Fault: An exclamation mark inside a circled parenthesis. This represents a brake system warning, indicating either a brake system malfunction or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire Pressure Anomaly: An exclamation mark inside a parenthesis with a horizontal line below. This represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range.
13
1
Share

What is the RPM at 80 mph for a car?

At 80 mph, the RPM of a car ranges from 2000 to 2500. The reasons for high RPM are: 1. Sudden increase in throttle opening; 2. Fuel injector leakage or blockage; 3. Slippage or damage to the air conditioning clutch; 4. Air intake system leakage; 5. Insufficient engine power output. Solutions for high RPM include: 1. Adjusting the throttle opening; 2. Replacing the fuel injector, air conditioning clutch, air intake system, or engine. The reasons for unstable RPM gauge readings are: 1. Oil accumulation and carbon buildup in the throttle; 2. Dirty intake tract; 3. Blockage in the fuel system, particularly the fuel injector; 4. Faulty intake pipe.
19
5
Share

How to Turn Off the Maintenance Reminder for the X-Trail?

The method to turn off the maintenance reminder for the X-Trail is: 1. Press the toggle button and the confirm button on the left side of the steering wheel to enter the maintenance interface; 2. Click on the maintenance option, then select the engine oil and filter option; 3. Choose the reset option below the number, adjust the number on the right to 5000 kilometers, and click confirm. Taking the 2021 X-Trail as an example, it is a compact SUV with body dimensions of: length 4675mm, width 1820mm, height 1722mm, a wheelbase of 2706mm, a minimum ground clearance of 208mm, and a body weight of 1489kg.
14
1
Share

Which country is Nissan from?

Nissan is a Japanese brand. The models under Nissan include Teana, Sylphy, X-Trail, Qashqai, Venucia, etc. Taking the 2021 Teana as an example, its body dimensions are: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, fuel tank capacity 61.3l, and curb weight 1456kg. The 2021 Teana has a MacPherson strut front suspension and a trapezoidal control arm multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 156ps, maximum power of 115kw, maximum torque of 197nm, and is paired with a CVT continuously variable transmission.
9
2
Share

What brand is the Lynk & Co 03?

Lynk & Co 03+ belongs to the Lynk & Co brand, which is a joint venture between Geely Auto Group and Volvo Car Group. Taking the 2021 Lynk & Co 03+ as an example, its body dimensions are: length 4677mm, width 1840mm, height 1461mm, with a wheelbase of 2730mm and a curb weight of 1615kg. The 2021 Lynk & Co 03+ features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 254PS, a maximum power of 187kW, and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.
6
4
Share

Where to Check the Tire Pressure Monitoring in the Lamando?

The tire pressure monitoring in the Lamando can be viewed on the dashboard. The Lamando's tire pressure monitoring system is passive, and it will alert on the dashboard when there is abnormal tire pressure. The functions of tire pressure monitoring: 1. Prevent accidents; 2. Extend the service life of tires; 3. Reduce wear and tear on vehicle components. Taking the 2021 Lamando as an example, its body dimensions are: length 4615mm, width 1826mm, height 1425mm, with a wheelbase of 2656mm. The 2021 Lamando has a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.4T inline 4-cylinder turbocharged engine, with a maximum horsepower of 131ps, a maximum torque of 225Nm, and a maximum power of 96kW, paired with a 7-speed dual-clutch transmission.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.