The most effective way to remove super glue from your car's paint or glass is to use a dedicated solvent-based adhesive remover like Goo Gone or 3M Adhesive Remover. For plastic interior trim, a high-percentage isopropyl alcohol (70% or higher) is a safer bet. The key is to act quickly, use the right product for the surface, and avoid abrasive scraping that can cause permanent scratches.
Start by testing your chosen remover on a small, inconspicuous area to ensure it doesn't damage the finish. Apply the product to a clean microfiber cloth, not directly onto the glue, to control the spread. Gently dab and rub the affected area. The glue should begin to dissolve and transfer onto the cloth.
For stubborn spots on glass or metal, you can carefully use a plastic razor blade held at a shallow angle to lift the softened glue without scratching. Never use a metal blade. Once the glue is gone, immediately wash the area with car wash soap and water to remove any residual solvent, then apply a coat of wax to protect the paint.
| Method | Best For Surface | Effectiveness (1-5) | Risk of Damage (1-5, 5=Highest) | Notes |
|---|
| Commercial Adhesive Remover | Paint, Glass | 5 | 2 | Most reliable; always test first. |
| Isopropyl Alcohol (70%+) | Plastic Interiors, Glass | 4 | 1 | Safer for sensitive materials. |
| Nail Polish Remover (Acetone) | Glass Only | 5 | 5 | Extremely harsh; will damage paint and plastic instantly. |
| Peanut Butter/Oil | All Surfaces | 2 | 1 | A slow, mild option for tiny amounts; breaks down glue with oil. |
| Clay Bar | Paint | 3 | 2 | Good for very thin, dried film after glue is mostly removed. |
