How to Get License Plates for a Car?

2 Answers
DeRachel
07/24/25 2:27am
Before getting license plates for a car, you need to pay the vehicle purchase tax and purchase car insurance. You also need to pay the additional vehicle tax. When paying the additional tax, you must provide the car purchase invoice and the vehicle qualification certificate. After filling out the purchase application form, go to the bank to make the payment. With the payment receipt and the registration form of the car purchase invoice, the original vehicle quality certificate, the original ID card, and a copy, you can receive the new car registration form. The specific steps are as follows: 1. After filling out the new car registration form, proceed with vehicle information registration. The vehicle management office needs to record the vehicle identification code and the engine number of the car, then take photos of the car. Go to the hall to collect the vehicle photos and the "Motor Vehicle Inspection Record Form." After that, the staff will check the documents. 2. After the inspection is completed, queue up at the window for processing and receive the "Motor Vehicle Acceptance Certificate." Then, the owner needs to choose a license plate number. After selecting the number, you can receive the temporary license plate, the motor vehicle driving license, and the motor vehicle registration certificate. With the driving license and the payment receipt, you can collect the motor vehicle license plate.
Was this review help?
4
2
Share
EmersynFitz
08/10/25 10:01pm
Last time I helped my cousin register his new car and had to make two trips, so I’ve summarized a lazy guide: First, bring the originals and copies of your ID, car purchase invoice, compulsory traffic insurance policy, and vehicle certificate. It’s best to have the VIN rubbing done in advance. The most crucial step is paying the purchase tax—some places now allow you to do it on your phone. Then, drive to the DMV to queue for the vehicle inspection. Remember not to apply window tint or modifications, and place the warning triangle behind the car. After the inspection, you can pick a license plate number. For the on-site 50-choose-1 option, it’s advisable to bring a decisive friend, as hesitating too long will make the system default to the first one. Once you get the vehicle license, wait three days, and the plates will be mailed to your home. Procedures vary by location, so it’s best to call ahead and check if an appointment is needed to avoid a wasted trip.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

How to Adjust the Reversing Camera Alignment?

The method to adjust the reversing camera alignment is: Start the vehicle. If the vehicle is not moving, turn on the vehicle's power switch, insert the key into the keyhole below the steering wheel, and turn the key to complete the setting. The function of the reversing camera is: It allows the driver to see the situation behind the vehicle on the display while reversing, avoiding accidents caused by the driver's inability to see behind the vehicle, thereby enabling safer reversing. The working principle of the reversing camera is: A wide-angle far-infrared camera device is installed at the rear of the vehicle, and the situation behind the vehicle can be clearly seen on the display inside the car. The steps for wiring the reversing camera are: 1. Disconnect the power supply connection of the battery; 2. Remove the small license plate light and pass the wiring harness through the position of the small license plate light; 3. Connect the adapter cable—red to the positive terminal, black to the negative terminal, and the signal wire of the camera to one end of the signal extension cable; 4. Connect the signal extension cable to the display; 5. After completing the wiring, restore the battery power supply.
19
2
Share

What is the reason for the screeching sound when braking with a cold engine that disappears when the engine is warm?

The reasons for the screeching sound when braking with a cold engine that disappears when the engine is warm are: 1. The brake caliper does not return to its original position, causing abnormal noise due to friction between the brake pads and the brake disc; 2. Insufficient lubrication of the engine due to oil settling at the bottom when the engine is cold, resulting in abnormal noise. The maintenance methods for brakes are: 1. High-temperature protection to prevent corrosion of the brake system and avoid the brake pads sticking due to high temperatures; 2. Clean oil stains from the brake disc and brake drum components to maintain heat dissipation of the brake disc; 3. Regularly replace the brake fluid; 4. Regularly check the thickness of the brake pads or brake shoes. The function of the brakes is to reduce speed or stop the vehicle. Their working principle involves converting the kinetic energy of the moving vehicle into heat energy through friction between the brake pads and the brake drum, as well as between the tires and the ground, thereby slowing down or stopping the car.
6
2
Share

What is the reason for oil leakage in the CV joint of a car's half shaft?

The reason for oil leakage in the CV joint of a car's half shaft is excessive wear. Symptoms of a damaged CV joint in a car's half shaft include: 1. Regular clicking noises during normal steering or when driving over bumps; 2. Loss of power in severe cases; 3. The vehicle pulling to one side while driving. CV joints are divided into: inner CV joints and outer CV joints. The inner CV joint connects to the transmission differential, while the outer CV joint connects to the wheel. The outer CV joint plays a role in power output and when the vehicle turns. The CV joint, also known as a constant velocity joint, connects the half shaft to the wheel and is a crucial component in the car's drivetrain. It ensures that power is continuously transmitted to the wheel in any direction, especially when the wheel jumps.
12
2
Share

What are the reasons for the engine yellow light on the dashboard?

The reasons for the engine yellow light on the dashboard are: 1. Poor gasoline quality leading to incomplete combustion of the mixture in the cylinder, resulting in carbon deposits; 2. The engine has been driven for too long, and the working characteristics of the spark plugs have weakened; 3. Mechanical aging of the vehicle; 4. Damage, poor contact, or signal interruption of the water temperature, crankshaft position, air flow, intake temperature, or oxygen sensors. The solutions for the engine yellow light on the dashboard are: 1. Check the condition of the car engine in time; 2. Check the condition of the car's sensors, air flow sensors, and spark plug components; 3. Check whether the car has a knocking situation; 4. Check whether the ignition coil is faulty; 5. Clean the engine carbon deposits.
18
0
Share

How to Cancel the Car Maintenance Reminder?

To cancel the car maintenance reminder, follow these steps: 1. Turn the ignition key to the "ON" position without starting the engine; 2. Press and hold the reset button on the right side with your left hand; 3. Turn off the ignition key and wait until the dashboard screen goes completely black, then turn the key to the "ON" position again; 4. Release the reset button when the maintenance reminder disappears automatically. The benefits of car maintenance include: 1. Ensuring the vehicle operates in optimal condition; 2. Improving vehicle efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle malfunctions; 5. Reducing noise and environmental pollution; 6. Maintaining a clean and damage-free vehicle appearance.
20
0
Share

What Causes the Shaking When Releasing the Accelerator?

The shaking when releasing the accelerator is caused by: mismatched engine and transmission, clutch issues, or gaps created by loose ball joints in the steering linkage. Precautions when pressing the accelerator include: 1. Press and release the accelerator pedal gently and smoothly; 2. Coordinate the release of the clutch with pressing the accelerator promptly and precisely; 3. Select the appropriate gear to keep the engine running mostly at medium speed and with a larger throttle opening to save fuel; 4. Before stopping or turning off the engine, release the accelerator pedal first and avoid revving the engine abruptly. The working principle of the accelerator is: pressing the accelerator pedal directly controls the throttle, increasing the throttle opening, which allows more air into the engine. The ECU then commands the fuel injection system to inject more fuel, increasing the engine's RPM and accelerating the vehicle.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.