How to Get License Plates After Buying a Car?

1 Answers
BrandonLee
07/30/25 3:27am
The process of getting license plates for a new car: 1. Go to the vehicle inspection station to inspect the vehicle and pre-record information; 2. Queue up at the service hall to get a number and then submit the review materials at the acceptance window; 3. Select the license plate number; 4. Pay the relevant fees at the payment window; 5. Collect the license plate and certificate at the license plate window; 6. Install the license plate at the designated installation point. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of the vehicle. They are usually made of aluminum, iron, plastic, or paper, with the vehicle's registration number, registration area, or other relevant information engraved on them. License plates serve as the numbering and information registration for each vehicle, and their main function is to identify the vehicle's region of registration through the plate number.
Was this review help?
11
4
Share
More Forum Discussions

What Causes an Engine to Lose Power?

There are many reasons why an engine may lose power. Broadly speaking, there are four main scenarios: fuel system issues; intake and exhaust system problems; electrical system malfunctions; and problems with certain engine components, such as small or poorly sealing valves, worn pistons or cylinder liners, etc. Since the engine itself consists of numerous parts, this category encompasses the most potential causes. If the fuel line is clogged, leading to insufficient fuel supply, the engine typically exhibits symptoms like reduced power and difficulty starting. Particularly at higher RPMs or under heavy load when greater fuel supply is required, restricted fuel flow can result in decreased engine power and poor performance. Fuel injector leaks or clogged spray holes that prevent proper atomization can lead to incomplete combustion after fuel injection, causing the engine to lose power. Valves are responsible for air intake and exhaust emission. Intake valves that are either too large or too small will affect performance. If the intake valve clearance is too small, the engine will suffer from insufficient air supply, leading to incomplete fuel combustion in the cylinders and reduced power output. If the valves are poorly sealed or have excessive clearance, cylinder pressure leakage may occur.
11
5
Share

In what situations is overtaking not allowed?

When the vehicle ahead is making a left turn, U-turn, or overtaking; when there is a possibility of encountering oncoming vehicles; when the vehicle ahead is a police car, fire truck, ambulance, or engineering rescue vehicle performing emergency tasks; when passing through railway crossings, intersections, narrow bridges, curves, steep slopes, tunnels, pedestrian crossings, or urban sections with heavy traffic, where overtaking conditions are not met. Do not overtake when visibility is poor due to wind, rain, snow, fog, or excessive dust raised by the vehicle ahead; generally, overtaking is not allowed when there is an oncoming vehicle within 150 meters ahead, and it is best to operate the vehicle within a 200-meter range; do not overtake when visibility is obstructed, such as when turning or crossing the top of a slope; double overtaking is not allowed when the vehicle ahead is overtaking; do not overtake when passing through Huaying Street, tunnels, narrow bridges, railway crossings, school gates, icy roads, or when towing a damaged vehicle. Do not overtake at intersections, such as when a car is driving on the main road. Do not overtake when there is a branch road on the left side to prevent accidents caused by the overtaken vehicle suddenly turning left.
2
0
Share

How to View Speeding on Highways?

There are many methods for speed detection on domestic roads, with the most commonly used being loop detection, radar speed measurement, and laser speed measurement. Since loop detection is highly accurate, it is one of the common speed measurement methods on many roads in China. However, loop detection requires road excavation to pre-install loops, which involves massive engineering and is not conducive to later maintenance, so this method is not widely adopted. Radar speed measurement utilizes the Doppler principle. The radar speed gun emits electromagnetic waves, which reflect off moving objects. The speed of the object is determined based on the frequency shift difference between the emitted and received waves. Since radar emits electromagnetic waves with a relatively wide beam area, radar speed guns can meet the requirements for multi-lane speed measurement in intelligent transportation. Laser speed guns are similar to radar speed measurement. They primarily measure speed by emitting laser beams and using the principle of distance measurement. However, because the laser beam area is very small, it requires precise aiming at a specific point on the vehicle, making it unsuitable for multi-lane speed measurement in intelligent transportation. Additionally, laser speed guns are relatively expensive, so radar speed guns are currently the primary method for speed measurement in China.
5
4
Share

Will a Car Get Damaged if Left Outside in Winter?

Leaving a vehicle outside in winter will not cause it to freeze and get damaged, but low temperatures during the season often lead to various car issues. Common winter-related problems include cold-start failures, battery drain, and heating system malfunctions, all of which are temperature-dependent. Cold-start failures, for instance, manifest as the vehicle requiring multiple attempts to start or sometimes failing to start at all. Starting difficulties in winter may not only stem from a weak or dead battery but could also be caused by carbon buildup in the engine's intake system. It is recommended to clean the throttle body before winter to reduce the likelihood of such issues. Additionally, engine oil tends to thicken in cold weather, increasing engine resistance and contributing to starting difficulties. Switching to a less viscous oil can help alleviate this problem. Checking the antifreeze is crucial. Antifreeze, or coolant, is essential for the engine year-round, not just in winter. Its primary function is to cool the engine by circulating through the cooling system, dissipating heat generated during operation to maintain optimal engine temperature. The antifreeze property prevents the coolant from freezing in cold weather, which could otherwise damage the radiator and render the car inoperable.
15
1
Share

Why is coasting in neutral prohibited?

Coasting in neutral is prohibited because: Here's a brief explanation of the dangers of coasting downhill in neutral. 1. Coasting in neutral can easily cause engine stalling. When driving at high speeds, engine stalling is extremely dangerous, especially when going downhill. Due to gravity, the vehicle's speed will continue to increase. When the engine stalls, the vehicle's steering system will fail, and the braking system will become ineffective. 2. When coasting downhill in neutral, the vehicle's speed accumulates, but you still need to control it. This means you have to constantly apply the brakes, which not only wears out the brake pads but also causes the brakes to overheat and potentially fail. In severe cases, this can lead to the cracking or bursting of the brake disc (or brake drum). 3. If you frequently coast in neutral, the driven wheels will drive the axle, which in turn drives the transmission. However, the transmission's lubrication relies on the gears (splash lubrication). When coasting, the transmission gears are not rotating, but the secondary shaft is. This can cause the secondary shaft to seize or result in severe wear between the secondary shaft and the gear engagement components.
18
1
Share

Should the Trumpchi M8 Use 92 or 95 Gasoline?

The Trumpchi GS8 requires 92-octane or higher quality unleaded gasoline, and using 95-octane gasoline is even better. Using fuel with an octane rating that is too low or does not meet the required standards may damage the engine or fail to meet performance requirements. Do not mix diesel into gasoline, as this can damage the fuel system and engine, and may cause the vehicle to catch fire. Below is relevant information about engine oil: Functions of Engine Oil: Engine oil serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. It is often referred to as the "lifeblood" of a car. Choosing the right engine oil and changing it regularly helps maintain the engine in good condition and extends its lifespan. Choosing Engine Oil: When selecting engine oil, the most expensive option is not necessarily the best. Instead, the right choice should be based on the characteristics of the car's engine and the driver's habits. Engine oil can also be categorized based on winter and summer use. For winter, the primary consideration is the low-temperature viscosity grade, while in summer, due to higher temperatures, there is no need to select an oil with an excellent low-temperature viscosity grade.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.