How to get hot air from the rear air conditioning of BMW X3?

Is it possible to exceed the speed limit in an average speed check zone?

It is not allowed to exceed the speed limit in an average speed check zone. Average speed check zone: This refers to a method of measuring the average speed of motor vehicles passing through a section of road (speed check zone) between two adjacent speed monitoring points. For example, if the distance of a speed check zone on a highway is 10 kilometers and the speed limit for that section is 120 kilometers per hour, a vehicle must take 5 minutes or more to complete the section to maintain an average speed below 120 kilometers per hour, thus complying with the speed limit. If the vehicle completes the section in less than 5 minutes, it is considered to have exceeded the speed limit. Speed measurement system: The so-called average speed check zone involves setting up two adjacent monitoring points on the same road section, while real-time traffic violation vehicle information is displayed on LED screens to notify offending vehicles and warn other vehicles.

1

2

Share

Where Are All-Season Tires Produced?

Nordic Viking is a brand under Germany's Continental Group, developed in Germany and manufactured in Europe. Nordic Viking: Nordic Viking is a brand under Germany's Continental Group, developed in Germany and manufactured in Europe. With over 80 years of tire manufacturing experience, Nordic Viking consistently delivers legendary quality, continuous innovation in R&D, and drives cutting-edge industry technology. Tire Classification: Automotive tires can be divided into pneumatic tires and solid tires based on their carcass structure. The vast majority of modern vehicles use pneumatic tires. Depending on the internal air pressure, pneumatic tires can be categorized into high-pressure tires, low-pressure tires, and ultra-low-pressure tires.

6

5

Share

How to Use Insurance for Car Repairs at a 4S Shop?

After the insurance company assesses the damage, go directly to the 4S shop for repairs. Pay attention to verifying the vehicle information: This mainly includes the vehicle repair unit (owner's name), license plate number, engine number, chassis number, entry time, and exit time (settlement time). The key points are the engine number and chassis number. The owner should carefully verify these two numbers with those on the vehicle registration certificate to prevent the settlement staff from entering them incorrectly. Otherwise, in case of an accident, there may be no recourse for complaints. Ask questions about the repair items: Through the repair items listed on the settlement sheet, the owner can understand what repairs and maintenance operations the vehicle received at the service station this time, whether they exceed the agreed scope of repair items with the service personnel, and whether the labor costs are appropriate. It is recommended that owners review the items carefully and ask more questions to avoid losses.

18

5

Share

What procedures are required for the scrapping of a two-wheeled motorcycle?

The procedures required for scrapping a two-wheeled motorcycle include: "Application Form for Suspension, Resumption/Cancellation of Registration of Motor Vehicles," the identity proof of the motor vehicle owner (ID card or organization code certificate), the motor vehicle license, the motor vehicle registration certificate, and the vehicle license plate. Process for motor vehicle scrapping: The car owner applying for scrapping and renewal must fill out one copy of the "Application Form for Modification, Transfer, Alteration, Suspension, and Scrapping of Motor Vehicles" and affix the owner's seal. Apply at the registration acceptance counter, and for vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age, the motor vehicle inspection counter will verify and, if they meet the scrapping standards, issue a "Vehicle Scrapping Notice." The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice." After verifying the "Notice," the recycling company will dismantle the vehicle and take photos. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Modification Form," "XX Province Updated Vehicle Technical Appraisal Form," "Scrapped Vehicle Recycling Certificate," and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates will be reclaimed, and the application will be submitted for approval as per regulations to complete the scrapping registration.

4

3

Share

How much repair fluid should be added to a 12V battery?

12V 20Ah battery requires 10ml to 15ml per hole. Conventional fluid replenishment method: Distilled water, deionized water, or replenishment fluid with a specific gravity of 1.0 to 1.2 should be used. After replenishing the lead-acid battery, it must be left to stand for about 10 hours to allow the liquid inside the lead-acid battery to fully integrate before proceeding with the repair. Do not overfill the fluid. Replenishment fluid with too low a concentration or improper replenishment for lead-acid batteries will affect the repair effect or cause a decrease in the battery's capacity. The use of ordinary drinking water or inferior lead-acid battery replenishment fluid is strictly prohibited, as it may cause severe damage to the lead-acid battery. Precautions: First, add the nano-carbon sol battery activator according to the specified dosage. If the battery is severely dehydrated, add a small amount of deionized distilled water. Look through the filling hole to check if the separator inside the battery is moist but no water is visible, or use a syringe to withdraw any excess water. The principle of adding water is to err on the side of too little rather than too much.

13

0

Share

Which is higher between tire grades H and V?

Tire grades H and V are compared, with V having a higher speed rating. H and V represent the speed ratings of tires, indicating the maximum speed a tire can withstand. The H grade can withstand a maximum speed of 210 km/h, while the V grade can withstand up to 220 km/h. Tire speed ratings start from the letter M, with letters further in the alphabet indicating higher tire performance. However, in the tire speed rating comparison chart, there is an H between U and V. The H grade stands for "High performance," meaning tires with an H rating can support a maximum speed of 210 km/h and are considered high-performance tires, typically used in mid-to-high-end sedans. To better mitigate tire deformation and heat generation, higher speed-rated tires are reinforced in the shoulder and tread areas. This not only helps reduce deformation during rolling but also ensures more stable performance in the tire's contact area with the ground. Simply put, tires with higher speed ratings offer better grip during vehicle turns and enhanced durability.

10

3

Share

How to get hot air from the rear air conditioning of BMW X3?

Is it possible to exceed the speed limit in an average speed check zone?

Where Are All-Season Tires Produced?

How to Use Insurance for Car Repairs at a 4S Shop?

What procedures are required for the scrapping of a two-wheeled motorcycle?

How much repair fluid should be added to a 12V battery?

Which is higher between tire grades H and V?

What brand is Transit?

What brand is a standing lion?

Does repainting car doors affect the vehicle?

Which is higher between tire speed ratings H and V?