
Do not press the brake pedal. First press the start button once, then press and hold it for 15 seconds on the second press to start the vehicle. Insert the remote control into the center floating armrest box. The Beijing IX35 keyless start models have a backup ignition lock designed inside the center armrest box. You can insert the mechanical key from the remote to manually start the ignition, then replace the remote's battery or have it repaired.

I've been driving a ix35 for several years and have encountered situations where the key fob runs out of battery or fails to start the car quite often. The forced start procedure is simple: first locate the small emergency key blade on the key fob to manually unlock the door. Once inside the driver's seat, there's a dedicated induction slot or small hole either under the steering wheel or on the center console - insert the key head there, then press the start button to ignite the engine. This method works when the battery is dead or there's signal interference. I make it a habit to replace the key fob battery every two years to avoid trouble. If this trick doesn't work, it might indicate issues with the vehicle's main battery or other electrical faults - better call for jump-start assistance or professional inspection rather than forcing it and risking damage. Always remember safety first - never attempt this in the middle of the road, find a secure location to operate.

As an experienced mechanic who has worked on many ix35 models, I often help owners resolve starting issues. The key problem usually lies in the key system malfunction, such as weak batteries or sensor abnormalities. The backup solution is to manually start the car using the mechanical key. After opening the door, locate the slot near the start button (refer to the owner's manual for exact position), insert the key, and operate the ignition button. This method is designed as a fail-safe, but avoid frequent use to prevent circuit damage. It's advisable to promptly check the vehicle's voltage and key . If ineffective, visit a repair shop immediately to avoid potential larger circuit issues that could compromise driving safety. Regular system checks during maintenance can save a lot of trouble.

Don't panic if your ix35 won't start. Take out the spare small key from your key fob, manually unlock and enter the vehicle, then press the start button with the key held within a few centimeters - this forced start method usually works. It's particularly useful when the key battery is dead or the signal is weak. If it doesn't work, don't waste time and immediately call for a tow truck or roadside assistance to ensure your safety. Common causes include depleted key batteries or electromagnetic interference with the vehicle. Regularly replacing the battery can prevent such headaches.

As a young driver of the ix35, I've found it much easier after learning how to force-start the car. When the key fob dies, use the small key to open the door, then locate the ignition slot on the center console (usually near the storage compartment), insert the key and press the button to start the car. I was confused the first time, but it worked perfectly after checking online. The key is to stay calm and follow the steps carefully without forcing anything. Preventive advice: replace the battery every two years and keep a spare key at home to avoid unexpected delays in your travels.

The ix35's smart start system has a backup plan in case of failure. Forced start is achieved by manually operating with the mechanical key: after unlocking the door, insert the key into the induction area (usually on the dashboard) to start the engine as a backup. This stems from reasons like low battery or external interference, so it's good to be familiar with the owner's manual location. It's recommended to keep the key battery sufficiently charged, otherwise it may easily trigger other failures such as inability to unlock the door. Test the system during regular vehicle maintenance to maintain a stable driving experience—don't overlook these details.


