How to Follow Vehicles When Driving at Night on This Road Section?

1 Answers
VonBrayden
07/29/25 9:09pm
When following vehicles at night, use low beam headlights, maintain a safe distance, and pay attention to changes in the signal lights of the vehicle ahead. Here is relevant information: 1. Do not use high beams: When following vehicles at night, use low beam headlights instead of high beams to avoid dazzling the driver of the vehicle ahead, and maintain a slightly longer safe distance than during daytime driving. 2. Overtaking: Overtaking is generally not recommended at night. If overtaking is necessary, carefully observe the road conditions around you. When conditions permit, turn on the left turn signal, accelerate to close the distance, and maintain an 'offset driving' position with the vehicle ahead. When about 20 meters away from the vehicle ahead, switch between high and low beams two or three times to signal overtaking (honking is prohibited in urban areas at night). After the vehicle ahead yields the right of way, overtake from the left side. After overtaking, accelerate to move away, and return to the original lane only after increasing the distance.
Was this review help?
16
0
Share
More Forum Discussions

What Causes the Abnormal Noise from the Chassis After the Car Stops?

The reasons for abnormal noise from the chassis after the car stops are: 1. Corrosion or aging of the stabilizer bar bushings; 2. Damaged brake pads; 3. Malfunction in the connecting parts between the suspension and shock absorber; 4. Abnormal noise from the wheel bearings; 5. Deformation of the shock absorber spring; 6. Aging or wear of the shock absorber pressure bearings. Daily maintenance methods for the car chassis include: 1. Proper adjustment of the front wheel toe-in; 2. Good lubrication and proper adjustment of the wheel hub bearings; 3. Pay attention to changes in the front and rear axles and the frame; 4. Check for any damage to the leaf springs; 5. Proper adjustment of the brake clearance; 6. Monitor the working condition of the clutch.
18
2
Share

How to One-Touch Power Window Up for Honda Civic?

Honda Civic one-touch power window up method is: 1. Press and hold the lock button for 5 seconds without releasing to make all windows roll up simultaneously; 2. Release the button when you hear a click sound. Taking the 2019 Civic as an example, its body dimensions are: length 4658mm, width 1800mm, height 1416mm, wheelbase 2700mm, minimum ground clearance 105mm, and fuel tank capacity 47L. The 2019 Civic is equipped with a 1.0T turbocharged engine, with maximum power of 92kW and maximum torque of 173Nm, matched with a CVT continuously variable transmission. It uses MacPherson strut front suspension and multi-link independent rear suspension.
3
1
Share

What brand of tires does the Mistra use?

The Mistra uses Hankook tires, with the tire model being 205/60R/16. The Mistra is a 4-door, 5-seater sedan launched by Beijing Hyundai. Taking the 2021 Mistra Flagship Edition as an example, its body dimensions are: length 4780 mm, width 1815 mm, height 1460 mm, with a wheelbase of 2770 mm and a fuel tank capacity of 52 liters. The 2021 Mistra Flagship Edition is equipped with a 1.5T inline 4-cylinder turbocharged engine, with a maximum power of 125 kW at 5500 rpm, and a maximum torque of 253 N·m between 1500 to 4000 rpm.
9
4
Share

How Long Does It Take to Fully Charge the Chery Ant?

Chery Ant charging comes in two types: slow charging takes 7 hours to fully charge, while fast charging takes only half an hour. Additional Information: Background: The Chery Ant is a small pure electric vehicle produced by Chery New Energy. Inheriting the "Technology Chery" gene, the Chery New Energy Ant is built on the LFS pure electric platform. The Ant 150K Fan Edition, launched on September 30, 2020, is a commemorative model celebrating the sales milestone of 150,000 units. Model Specifications: It is equipped with a single-speed electric vehicle transmission, with dimensions of 3200mm in length, 1670mm in width, and 1550mm in height, a wheelbase of 2150mm, and a curb weight of 950kg.
11
3
Share

What are the factors affecting the ignition timing advance angle of an engine?

Factors affecting the ignition timing advance angle of an engine are: 1. Engine speed; 2. Load and fuel type. The ignition timing advance angle refers to the spark plug firing before the piston reaches the top dead center of compression, igniting the combustible mixture in the combustion chamber. The functions of the ignition timing advance angle are: 1. To ensure the effective utilization of the energy generated by the combustible mixture; 2. To improve the engine's output power. The adjustment method for the ignition timing advance angle is: 1. Check if the platinum contacts have any signs of burning; 2. Remove the secondary chamber vacuum hose from the vacuum advance compensation device, block the two ports connected to the hose, and let the engine idle; 3. Use a timing light to check the ignition timing advance angle; 4. When rotating the distributor housing counterclockwise, the ignition timing advance angle will increase; 5. When rotating the distributor housing clockwise, the ignition timing advance angle will decrease.
18
3
Share

Which car brand features a leaping jaguar as its logo?

The brand featuring a leaping jaguar logo is Jaguar Cars, a British luxury automobile manufacturer. Taking the 2020 Jaguar XFL two-wheel-drive Feng Hua Edition as an example, it belongs to a mid-to-large-sized four-door five-seater sedan with body dimensions of: length 5093mm, width 1880mm, height 1456mm, and a wheelbase of 3100mm. The 2020 Jaguar XFL two-wheel-drive Feng Hua Edition is equipped with a 2.0T turbocharged engine, delivering a maximum power of 147kW and a peak torque of 320Nm. It adopts a front-engine, rear-wheel-drive layout, with a double-wishbone independent front suspension and a multi-link independent rear suspension.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.