How to Fold the Side Mirrors on a 7th Generation Accord?

1 Answers
SanMadison
07/30/25 6:08am
When the side mirror is parallel to the horizon, with the horizon positioned at the center of the mirror surface (1/2 of the height), the visibility is optimal. The mirror surface should slightly face the driver. After adjusting the seat to a comfortable position, it is recommended to have the car body image occupy 1/4 of the side mirror, with the horizon occupying 1/2 of the mirror. First, adjust the horizon to occupy 2/3 of the right side mirror, while the car body occupies 1/4 of the mirror.
Was this review help?
11
2
Share
More Forum Discussions

Will all future cars be equipped with particulate filters?

All future cars will be equipped with particulate filters. Particulate filters can reduce and capture particles in engine exhaust emissions, recycle them, decrease vehicle exhaust emissions, enhance the environmental friendliness of vehicles, and reduce atmospheric pollution. To check whether a vehicle is equipped with a particulate filter, you can use the following three methods: Refer to the and to see if the particulate filter function is mentioned. Additionally, carefully review the fault codes in the manual to check if there is a "Particulate Filter" warning light indicator. Check the label on the oil filler cap. If the cap clearly indicates the use of 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Inspect the exhaust pipe behind the three-way catalytic converter to see if there is an additional cylindrical section. If present, that is the particulate filter. Location of the particulate filter: The particulate filter is located behind the three-way catalytic converter and in front of the muffler, surrounded by the front and rear oxygen sensors.
7
5
Share

What is the fuel consumption of the Skoda Rapid?

Skoda Rapid has a fuel consumption of approximately 6.2L per 100 km for the 1.4L engine, 6.4L for the 1.6L manual, and 7.3L for the 1.6L automatic. Below is a brief introduction to the Skoda Rapid: 1. Exterior: As Skoda's first mass-produced model featuring a new design language, the Rapid won the prestigious German Red Dot Design Award shortly after its launch. The vehicle's design draws inspiration from Czech crystal-cutting techniques, featuring clean, flowing lines and bold, sculpted surfaces that create a three-dimensional and robust body shape. 2. Powertrain: It is equipped with a 1.4L engine delivering a maximum power of 90 horsepower and a 1.6L engine with a maximum power of 110 horsepower, paired with a 5-speed manual or 6-speed automatic transmission. This powertrain setup is also found in the domestic versions of the new Santana and new Jetta.
18
0
Share

What is the general speed limit on highways?

On the highways in mainland China, there are speed limits for motor vehicles. The general maximum speed is 120 km/h, and the minimum speed is 80 km/h. For special road sections and tunnels, the speed limit indicated on roadside signs should be followed. For novice drivers, maintaining a speed of 90-100 km/h is recommended for safety. Below are some precautions for driving on highways: 1. Safety check: Before getting on the highway, check for any potential safety hazards. It's essential to inspect your vehicle for any issues before driving on the highway. 2. Wear seat belts: Always wear seat belts in the front and rear seats, and avoid placing unsecured items in the vehicle. 3. Stay in one lane: Avoid frequent lane changes on the highway, switching between the overtaking lane and the regular lane. Do not make sudden decelerations or stops without warning. While driving, avoid driving side by side with other vehicles, staying in the overtaking lane for extended periods, or attempting to overtake from the emergency lane. Additionally, prepare for lane changes in advance when exiting the highway to avoid missing the exit.
18
4
Share

How many kilometers can a set of brake pads last?

The mileage depends on the car's usage. Generally, they need to be replaced every 50,000 kilometers, while some drivers can go up to 100,000 kilometers before replacement. In fact, under normal driving conditions, the service life of front brake pads is 30,000 kilometers, while rear brake pads last about 60,000 kilometers. Rust on car brake discs is a normal phenomenon. Here are detailed explanations about it: 1. Minor rust: Minor rust often occurs, such as after the car is left in the rain overnight or when it doesn't dry properly after washing. In such cases, continuous braking while driving can help remove the rust, as the friction between the brake disc and the brake caliper during braking will wear off the rust over multiple applications. 2. Severe rust: If the brake disc has severe rust, the entire surface may be covered with a thick layer of rust. Stubborn rust can also accelerate the wear of brake pads, so it's necessary to take the car to a repair shop to have the brake discs polished.
17
1
Share

What are the folk methods to determine if a three-way catalytic converter is clogged?

The following are folk methods to determine if a three-way catalytic converter is clogged: 1. Check whether the voltage of the front and rear oxygen sensors of the three-way catalytic converter is consistent: if they are consistent, it means the three-way catalytic converter is damaged, that is, it is clogged or burned out due to engine misfire. 2. Feel the airflow: put your hand near the exhaust pipe to see if you can feel the airflow. If you can't feel it, it means it's clogged. 3. Temperature difference: judge whether it is clogged by sensing the temperature difference before and after the three-way catalytic converter. Causes of three-way catalytic converter clogging: 1. Gasoline: high sulfur content in gasoline can easily form chemical complexes in the three-way catalytic converter, causing clogging. 2. Engine oil: long-term use of engine oil containing sulfur and phosphorus antioxidants can easily cause clogging of the three-way catalytic converter. 3. Road conditions: since the most incomplete combustion products are generated during acceleration and deceleration, long-term driving on congested roads can easily cause clogging of the three-way catalytic converter.
11
1
Share

How to Connect Bluetooth in Buick LaCrosse?

Method to connect Bluetooth in Buick LaCrosse: First, turn on the car's Bluetooth, enable the Bluetooth function on your phone, and set the phone's Bluetooth to be visible to everyone or searchable/open for detection. Then, search for devices on the car's Bluetooth, find your phone's Bluetooth name, and select it to connect and pair. The Bluetooth technology in the car's Bluetooth system is an extension of the phone's Bluetooth technology, sharing the same transmission system. Bluetooth hands-free is an in-car wireless hands-free system designed based on wireless Bluetooth technology, with the main function of connecting to a phone via Bluetooth for hands-free calls during normal driving, aiming to free your hands and reduce the risk of traffic accidents. The Buick LaCrosse has a body size of 5026 mm in length, 1866 mm in width, and 1462 mm in height, with a wheelbase of 2905 mm. It features front-engine, front-wheel drive and has a fuel tank capacity of 60 liters.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.