How to Fold the Rearview Mirrors?

2 Answers
AustinFitz
07/29/25 8:03am
Methods for folding rearview mirrors: Generally, press the automatic folding button for the rearview mirrors or rotate the button to the automatic folding position, and both side mirrors will fold simultaneously. Rearview mirror folding can be either manual or electric. Electric rearview mirrors typically achieve automatic folding through an operation button located on the driver's side door or the car's central console. Car rearview mirrors are positioned on the left and right sides of the front of the car and inside the car's front. They reflect the conditions behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, thereby expanding the driver's field of vision.
Was this review help?
17
0
Share
PrestonAnn
08/12/25 11:16am
Folding the side mirrors is actually quite simple, and I do it often while driving, especially when parking in tight spaces. For manual mirrors, just gently push them toward the car body—they’ll fold inward. Avoid using too much force to prevent damaging the mirror glass or bracket. Power-folding mirrors are even easier: look for a small button on the dashboard or door panel, usually labeled "Fold" or marked with a mirror icon. Press it, and the mirrors will retract automatically—some cars even allow independent left/right control. Remember to fold them before automatic car washes or street parking to reduce the risk of scratches. It also makes cleaning easier, as folding provides better access to wipe the mirror surface. In short, it’s all about forming the habit.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What Maintenance Is Needed at 25,000 Kilometers?

Maintenance items at 25,000 kilometers are as follows: 1. Air filter element: This mainly depends on the driving conditions. If frequently driven in clean environments, it can be replaced every 15,000 km. If road conditions are harsh, it must be replaced every 10,000 km. 2. Cabin air filter: The replacement cycle for the cabin air filter is 20,000 km, so it should be replaced at this time. 3. Tire rotation: At 20,000 km, tires should be rotated to ensure even wear, and tire pressure should be checked to reduce driving resistance. 4. In addition to regular oil changes, at 20,000 km, check the levels of coolant, brake fluid, power steering fluid, and gear oil. 5. Wiper blades: At 20,000 km, check the wear condition of the wiper blades. 6. Battery: For lead-acid batteries, check the electrolyte level. If it's a maintenance-free battery, this step can be skipped.
15
1
Share

Can Different Types of Engine Oil Be Mixed?

Engine oils from different brands cannot be mixed. Engine oils from different brands and grades are formulated with various additives tailored to the working characteristics and environmental requirements of different engines, resulting in differences in viscosity, anti-wear properties, corrosion resistance, anti-knock performance, and volatility. Mixing them may degrade the oil's performance and even cause damage to the engine. Here are the reasons why engine oils should not be mixed: 1. Mixing new and used oil reduces performance. New and used oils should not be mixed. Used oil contains a large amount of oxidative substances, and when mixed with new oil, it accelerates the oxidation and degradation of the new oil, thereby reducing its effectiveness and lifespan. 2. Mixing oils can cause turbidity. Oils from different brands and grades should not be mixed. The chemical additives in different brands and grades of oil may react with each other, reducing lubrication effectiveness and producing acidic or alkaline compounds that accelerate corrosion of engine components.
17
1
Share

Which Pedal is the Accelerator?

Clutch pedal is on the far left, accelerator pedal is on the far right, and the brake pedal is in the middle. Here are the relevant details: 1. When the accelerator pedal is pressed, the throttle valve opening increases, allowing more air to enter the engine. At this point, the ECU commands the fuel injection system to inject more fuel, causing the engine speed to rise and the car to accelerate. Most modern vehicles use electronic throttle control, while older models used cable-operated throttle systems. 2. In electronic throttle systems, there is no physical connection between the accelerator pedal and the throttle valve. In contrast, cable-operated systems have a steel cable linking the two. Over time, carbon deposits can accumulate on the throttle valve, requiring periodic cleaning by car owners. 3. After cleaning the carbon deposits and reinstalling the throttle valve, it's necessary to perform an ECU reset. Otherwise, the engine may experience temporarily increased fuel consumption. The engine's ECU has strong adaptive learning capabilities - if carbon deposits are present, the ECU will adjust its control logic accordingly to manage the throttle valve with deposits.
20
5
Share

What to Do When Shock Absorbers Make Noise in Winter?

Currently, whether at a 4S shop or a repair shop, the common solution for various shock absorber failures is generally to replace the new body components. Therefore, to completely solve the problem of shock absorber noise, it can basically only be resolved by replacing the components. The following are the reasons that cause shock absorber noise: 1. In actual use, shock absorbers can develop noise faults, mainly due to collisions between the shock absorber and leaf springs, the frame or axle, damage or detachment of rubber pads, or deformation of the shock absorber dust cover; 2. It could also be caused by insufficient oil, etc. The cause should be identified and repaired; 3. After inspection and repair, the shock absorber should undergo a performance test on a specialized test bench. When the resistance frequency is at 1001mm, the resistance during the extension and compression strokes should meet the requirements, indicating that the shock absorber is basically normal.
2
0
Share

Should You Press the Clutch When Braking in a Manual Car?

When braking in a manual transmission car, you must press the clutch. 1. The correct method is to first press the brake and then press the clutch to shift gears. The specific operation method depends on how much speed you need to reduce. 2. If you only need to slightly reduce speed, for example, from 70 km/h to 65 km/h, you can directly press the brake without pressing the clutch. However, if you need to significantly reduce speed but not stop, 3. For instance, if you are in 5th gear at 70 km/h and need to reduce the speed to 10 km/h, failing to press the clutch and applying heavy braking will cause the car to start shaking when the speed drops to a certain point, such as below 30 km/h. If the speed drops further or the car stops, it may stall. In such cases, you should first press the clutch and then apply the brakes.
18
4
Share

Is the Annual Inspection Label Replaced Every Year?

Annual inspection labels are not replaced every year. New vehicles are exempt from annual inspections for the first six years, but it is required to collect and replace the annual inspection and environmental protection labels on the vehicle every two years. The validity period of the motor vehicle inspection can be checked on the vehicle license or the compliance label. The process for vehicle annual inspection is as follows: 1. Fill out two forms: the Motor Vehicle License Application Form and the Motor Vehicle Inspection Record Form; 2. Go to the annual inspection registration window to review and input the materials; 3. Visit the violation inquiry window to pay any outstanding fines if there are violations; 4. Have the vehicle undergo an external inspection by an inspector, who will check the vehicle identification number (VIN) under the hood and provide a signed inspection approval page, then proceed to the inspection payment window to receive the invoice; 5. Submit all materials at the inspection registration window; 6. Wait in line for the inspection, and receive an inspection report upon completion; 7. Submit the annual inspection materials to the staff; 8. Once the inspection is passed, the annual inspection label will be issued.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.