How to Fold the Rearview Mirror on a Civic?

What is the long-distance fuel consumption of the Geely Jiaji PHEV?

Geely Jiaji is equipped with a plug-in hybrid system consisting of a 1.5T engine + electric motor + battery pack, with a comprehensive maximum horsepower of 258 hp and a peak torque of 385 N·m. The battery pack capacity is 11.3kWh. It is paired with a 7-speed wet dual-clutch transmission, and the MIIT comprehensive fuel consumption is only 1.6L/100km. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. 2. Testing method: The test can be conducted on the road or on a chassis dynamometer, and then the fuel consumption per 100 kilometers is obtained through the 'flow meter method' or 'carbon balance method'.

15

2

Share

How to Remove Rusted Shaft and Sleeve?

Methods for removing rusted shafts and sleeves: 1. Tapping Method: Use tools to tap and vibrate the bearing out. When applying this method, pay attention to accurate tapping positions and moderate force. 2. Gas Cutting Method: This method causes destructive damage to the bearing. If the technique is not proficient, it may harm the shaft, so caution is required. 3. Pulling Method: Use a specialized removal tool, such as a hub bearing puller, which can be directly fixed to the hub, making the process simple, convenient, time-saving, and labor-saving. The sleeve is a cylindrical mechanical part fitted over the shaft and is a component of a sliding bearing. The sleeve and bearing housing adopt an interference fit, while the sleeve and shaft adopt a clearance fit. The end contacts components such as gears and bearings with compressive stress. Sometimes, to ensure the shaft can fit with standard parts like sealing rings and allow middle components to pass through the shaft end, the sleeve is designed to fit with the sealing ring, and the shaft can be made thinner to ensure the components can pass through.

17

2

Share

What is the horsepower of the Yuchai 4108?

The Yuchai 4108 engine, with the Yuchai code YC4D, is available in 120 horsepower, 130 horsepower, and 140 horsepower variants. Below are some details about the Yuchai 4108d: 1. Detail one: The four-cylinder engine mainly consists of components such as the cylinder block, crankcase, cylinder head, and cylinder gasket. The basic principle of a four-cylinder engine is to convert the thermal energy of gasoline (diesel) into mechanical energy by pushing the piston to do work through the expansion of gas combustion in a sealed cylinder. 2. Detail two: The engine's power is not equal to the vehicle's power, as there are intermediate losses in mechanical transmission. Additionally, designs that increase the thickness and weight of the vehicle body for safety considerations can also lead to a loss of engine power. Therefore, vehicles equipped with small-displacement engines are not necessarily slower or inferior in performance compared to those with high-power engines.

19

3

Share

How to Confirm Engine Valve Noise?

Methods to confirm engine valve noise: 1. When the engine is idling, if there is a solid and crisp sound on the camshaft side that is more pronounced than the valve tappet noise and does not disappear during the "ignition cut-off" test, you can increase the engine speed to medium speed for testing. If the noise weakens or disappears, it may be a tappet noise; 2. You can remove the valve cover, make a wire hook, and test each tappet by hooking the adjusting bolt on the tappet. When hooking a certain tappet, if the noise weakens or disappears, it can be determined that the noise is coming from that tappet. Tappet noise is a light and crisp sound, which is a rhythmic intermittent noise, and the noise source is on the camshaft side; For side-valve engines, removing the valve cover makes the noise more obvious.

12

3

Share

How to Detect Inventory Cars?

Methods to detect inventory cars: check the production date, inspect the hood for dust, examine the car's odometer, check rubber parts for aging, and inspect the chassis. Below is relevant information about inventory cars: 1. Concept of inventory cars: There is no clear legal definition for inventory cars, but in the automotive sales industry, the term refers to cars that have been in stock for more than 6 months without being sold. As a commodity, cars are large in size, expensive, and have high storage costs, while also tying up a significant amount of the dealer's capital. Therefore, dealers generally do not allow inventory cars to remain unsold for long periods. However, due to various reasons, there are indeed many cars on the market that have been in stock for over 9 months, and those exceeding 1 year are considered overdue inventory cars. 2. Handling methods: Special price treatment, selling at discounted prices to recover losses. Internal sales, where dealers sell their cars at a discount to their employees, serving as employee benefits on one hand and not affecting market prices on the other.

11

0

Share

How many kilowatt-hours does it take to fully charge the Roewe ei5?

Roewe ei5 requires 35 kilowatt-hours to fully charge. Here is some extended information about the Roewe ei5: 1. The Roewe ei5 is a pure electric vehicle equipped with an 85kw electric motor, delivering a maximum torque of 255 Nm. 2. The Roewe ei5 uses ternary lithium batteries, which are lighter in weight and have higher energy density. 3. The front suspension of the Roewe ei5 uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. 4. The dimensions of the Roewe ei5 are 4544mm in length, 1818mm in width, 1536mm in height, with a wheelbase of 2665mm. 5. The Roewe ei5 is equipped with multiple intelligent safety features including LDW Lane Departure Warning System, AEB Automatic Emergency Braking System, FCW Forward Collision Warning System, SAS Speed Assistance System, and automatic high/low beam switching for headlights.

18

2

Share

How to Fold the Rearview Mirror on a Civic?

What is the long-distance fuel consumption of the Geely Jiaji PHEV?

How to Remove Rusted Shaft and Sleeve?

What is the horsepower of the Yuchai 4108?

How to Confirm Engine Valve Noise?

How to Detect Inventory Cars?

How many kilowatt-hours does it take to fully charge the Roewe ei5?

What Problems Will Occur If a Car Relay Fails?

Where is the Evaporative Emission Control Valve Located?

What is the function of engine oil in a car?

What is the remote control matching method for the Volkswagen Santana Vista?