How to fold the rearview mirror of Haval H6?

1 Answers
Darren
07/29/25 9:38pm
Haval H6 rearview mirror folding method: The folding function control switch for the side mirrors is located inside the driver's side door. Rotate the control knob clockwise to the folding icon at the lower right to electrically fold both left and right side mirrors. Car rearview mirrors are located on both sides of the front of the car and inside the front of the car. They reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these positions clearly. The Haval H6 is a compact SUV under the Haval brand. The car has a length, width, and height of 4640mm, 1825mm, and 1690mm respectively, with a wheelbase of 2680mm. It is equipped with a 1.5GDIT and 2.0GDIT, wet 7DCT powertrain.
Was this review help?
19
0
Share
More Forum Discussions

What to Do If You Accidentally Scrape Someone Else's Car?

"If a car owner accidentally scrapes someone else's car, they should take photos for evidence if possible, stay at the scene to negotiate with the owner. If it's a minor traffic accident, both parties can quickly resolve it through negotiation; or they can call the police, letting the traffic police contact the owner for handling, and then contact the insurance company for damage assessment to proceed with the corresponding compensation. If no one is present at the accident scene, the car owner can first take photos with their phone for evidence, capturing the scene of the scrape between the two cars, including the license plates, and then move the car to a safe location to avoid causing traffic congestion. After scraping someone else's car, the driver must not flee the scene, as this constitutes hit-and-run. If the hit-and-run does not constitute a crime, the driver may face fines; if it constitutes a crime, they should be held criminally responsible according to the law, and their motor vehicle driving license will be revoked, with the driver permanently banned from obtaining a new one."
18
2
Share

How to deal with driving an unlicensed vehicle on the road?

Driving an unlicensed vehicle on the road should result in the detention of the vehicle, a deduction of 12 points, and a fine. New vehicles can be driven on the road if they have temporary license plates. There are two types of temporary license plates: one with a sky-blue background, black characters, and black borders, which is only valid for driving within the city (local temporary license plate); the other with a brown-yellow background, black characters, and black borders, which can be used for driving across cities (non-local temporary license plate). After the official license plate is issued, even if the temporary license plate has not expired, it cannot be used anymore. When driving a motor vehicle on the road, the vehicle must display the license plate, have the inspection qualification mark and insurance mark placed, and carry the vehicle registration certificate. The license plate must be displayed clearly and completely as required, and must not be intentionally obscured or damaged; no unit or individual is allowed to confiscate or detain the license plate.
14
2
Share

Is the alternating light in Subject 3 turned on twice or three times?

"The alternating light between high and low beams in Subject 3 requires toggling the lever twice. Method for alternating high and low beams: Locate the light control lever on the left side of the steering wheel, first turn on the low beam, then pull the light control lever towards yourself once. The high beam will temporarily turn on, and upon releasing, the lever will spring back, automatically turning off the high beam while the low beam remains on. One complete alternation between high and low beams is thus achieved. Usage scenarios for high and low beams: During the Subject 3 exam, upon hearing prompts such as 'approaching a sharp curve,' 'approaching a slope,' 'approaching an arch bridge,' 'approaching a crosswalk,' or 'approaching an intersection without traffic signals,' you must alternate between high and low beams no less than twice. When prompted with 'preparing to overtake, please use the correct lights,' first activate the left turn signal, then alternate between high and low beams no less than twice, followed by activating the right turn signal."
2
2
Share

Can You Still Drive with an Engine Oil Leak?

You should not drive a car with an engine oil leak. Below are the hazards of an oil leak: Wasting oil and causing internal engine damage: An engine oil leak not only wastes oil but may also cause internal engine damage. Additionally, since the engine operates at extremely high temperatures, oil leaking onto the engine or other high-temperature components can easily lead to spontaneous combustion. Risk of fire: Engine oil has a flash point exceeding 200°C. When it comes into contact with a turbocharger, which can reach several hundred degrees Celsius during operation, the flash point decreases, further increasing the risk of fire. Severe damage to components: An oil leak occurs when certain engine components are damaged, deformed, or improperly assembled, causing oil to drip rapidly. If this happens, immediate repair is necessary. On the other hand, minor oil seepage is less concerning because oil has strong permeation properties, and slight seepage due to high internal cylinder pressure is normal. Small-scale seepage can generally be ignored, but extensive seepage should be taken seriously, as it falls into the category of an oil leak and requires prompt inspection and repair.
13
1
Share

Is it Safe to Use Lesser-Known Brand Engine Oil?

Lesser-known brand engine oils can be used for cheaper cars, but are not recommended for more expensive vehicles. There are three types of engine oils: mineral oil, semi-synthetic oil, and fully synthetic oil. Mineral Oil: Refined from petroleum as the base lubricating oil, mixed with various additives. Compared to semi-synthetic and fully synthetic oils, it has higher impurity levels, is prone to carbon deposits, and requires frequent engine cleaning. Synthetic Oil: Engine oil manufactured through chemical methods by adding various components as needed. The correct term should be chemical synthetic lubricant, also known as chemical synthetic oil. Compared to mineral oil, it offers higher heat dissipation efficiency, better fluidity, and superior high-temperature resistance, hence its higher price. Semi-Synthetic Oil: A blend of synthetic and mineral oils, with performance characteristics between the two. Its price and replacement cycle are also intermediate. For ordinary naturally aspirated engines, semi-synthetic oil can be used.
12
1
Share

Can Non-Independent Suspension Be Converted to Independent Suspension?

Converting non-independent suspension to independent suspension depends on the vehicle model. Some models can be modified, while others cannot. Generally speaking, independent suspension is more expensive, has a complex structure, and offers better comfort, whereas non-independent suspension is cheaper, simpler in structure, but inferior in handling and comfort. Below is an introduction to the differences between non-independent suspension and independent suspension: 1. Suspension refers to all the power transmission connection devices between the car frame and the axle or wheels. Its main function is to transmit all forces and moments between the wheels and the body. 2. In an independent suspension system, each wheel is individually suspended under the frame or body via an elastic suspension system. Its advantages include lighter weight, reduced impact on the body, improved wheel-to-ground adhesion, and the ability to lower spring stiffness for better comfort. However, independent suspension systems have disadvantages such as complex structure, high cost, and inconvenient maintenance. Additionally, due to their complexity, they may occupy some interior space. 3. The structural feature of a non-independent suspension system is that both wheels are connected by an integral frame, with the wheels and axle suspended under the frame or body via an elastic suspension system. Non-independent suspension systems offer advantages such as simple structure, low cost, high strength, easy maintenance, and minimal changes in front-wheel alignment during driving. However, they are relatively poor in comfort and handling stability.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.