How to Fold Electric Rearview Mirrors?

2 Answers
McArthur
07/24/25 6:03am
Electric rearview mirrors can be folded by following these steps: 1. Press the vehicle's one-touch start button to power on the vehicle, as the mirrors cannot be folded without power; 2. Locate the window control buttons on the right-hand side armrest of the vehicle; 3. Adjust the mirrors by rotating the rearview mirror knob. Typically, automatically folded mirrors will automatically unfold the next time the vehicle is started. Electric rearview mirrors are generally foldable in mid-range and high-end vehicles, with folding functions categorized into manual and electric. Manual folding requires the driver to reach outside the window or exit the vehicle to fold the mirrors, whereas electric folding allows the driver to fold the mirrors from inside the vehicle, offering greater convenience.
Was this review help?
2
4
Share
Ramona
08/11/25 1:48am
I find the electric folding mirrors incredibly convenient, especially since I often drive into the city where parking spaces are tight. There's usually a dedicated button for it, typically located near the steering wheel or on the driver's side door panel. Just press and hold it for a few seconds, and the mirrors will slowly fold in. Remember, this should only be done when the car is parked—never while driving to avoid accidents. My car even has a memory function that automatically folds the mirrors when locked and unfolds them when unlocked, which is super handy. It's a good habit to regularly check the mirrors for any obstructions or unusual noises to prevent motor damage. Adopting this routine helps protect the car body from scratches, especially in narrow alleys or crowded parking lots. This thoughtful design takes less than ten seconds to operate each time, significantly enhancing convenience.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

What are the differences between the RS3 and S3?

The differences between the RS3 and S3 are: 1. Different body dimensions: The RS3 has a body length, width, and height of 4479mm, 1802mm, and 1399mm respectively; the S3 has dimensions of 4351mm, 1816mm, and 1438mm. 2. Different engines: The RS3 is equipped with a 2.5L inline 5-cylinder turbocharged engine; the S3 has a 2.0L inline 4-cylinder turbocharged engine. 3. Different wheel sizes: The RS3 uses 19-inch forged aluminum alloy wheels; the S3 features 18-inch forged aluminum alloy wheels, which are stylish and dynamic in design.
20
5
Share

What is the standard tire pressure for the Haval F7?

The standard tire pressure for the Haval F7 is 2.3 to 2.5 bar. The Haval F7 is equipped with a tire pressure monitoring system that can monitor tire pressure and temperature in real-time and alert the driver promptly when abnormalities are detected, allowing them to take appropriate measures to avoid accidents. When measuring tire pressure, it should be done when the tires are cold, either after the vehicle has been parked for more than 3 hours or driven less than 1.5 kilometers, to obtain accurate data. The Haval F7 is the second model in Haval's F series. In terms of body dimensions, it measures 4620mm in length, 1846mm in width, 1690mm in height, with a wheelbase of 2725mm.
8
5
Share

What is the difference between Jing Oil and Sinopec?

The differences between Jing Oil and Sinopec are: 1. Different refining processes: Jing Oil mainly uses domestic crude oil; Sinopec mostly uses imported crude oil. 2. Different operation modes: Jing Oil, as a private enterprise, has a smaller operation scope; Sinopec is a state-owned enterprise with a larger operation scope. Fueling precautions are: 1. Use automotive gasoline, as inappropriate fuel entering the fuel system may damage the fuel system and engine; 2. Do not use gasoline containing methanol or alcohol; 3. Avoid spilling fuel on the paint surface to prevent damage; 4. If the fuel tank door is frozen and cannot be opened, gently push or tap the fuel tank door to remove the ice and open it; 5. Prevent excessive fuel pressure from causing fuel spray.
17
0
Share

What is the reason for the lack of horn sound when locking a Mercedes-Benz car?

Mercedes-Benz car locking without horn sound is due to: 1. The car door is not properly closed; 2. The lock sound reminder is turned off in the central console settings. Taking the 2021 Mercedes-Benz A180 as an example, it belongs to the compact car category, with body dimensions of: length 4419mm, width 1796mm, height 1432mm, and a wheelbase of 2729mm. The 2021 Mercedes-Benz A180 features a McPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.3L turbocharged engine, delivering a maximum horsepower of 136PS, maximum power of 100kW, maximum torque of 200Nm, and is paired with a 7-speed dual-clutch transmission.
13
1
Share

What are the causes of high hydraulic oil temperature?

The causes of high hydraulic oil temperature are: 1. Poor heat dissipation, excessive dirt deposition on the radiator surface leading to inadequate heat dissipation and ventilation, resulting in excessively high oil temperature; 2. Improper selection of hydraulic oil grade; 3. Incorrect pressure adjustment; 4. Hydraulic pump cavitation; 5. Internal leakage; 6. Component wear; 7. Excessive friction caused by overly tight hydraulic components can also lead to increased oil temperature. Hydraulic oil is the hydraulic medium used in hydraulic systems that utilize liquid pressure energy, playing roles in energy transmission, wear resistance, system lubrication, corrosion prevention, rust prevention, and cooling in hydraulic systems. The functions of automotive engine oil are: lubrication, auxiliary cooling, cleaning, sealing to prevent leaks, rust and corrosion prevention, shock absorption, and wear resistance.
20
4
Share

Do All Diesel Vehicles Require Urea?

Not all diesel vehicles require urea. The function of urea is to convert nitrogen oxides in vehicle exhaust into harmless nitrogen and water, enabling the vehicle to meet national exhaust emission standards. The impacts of not using urea in vehicles include: 1. Exceeding emission limits, causing environmental pollution; 2. Chemical substances in the vehicle system may oxidize, leading to clogged urea nozzles and rendering the entire system inoperable; 3. Reduced vehicle power. The roles of urea are: treating exhaust to reduce pollutants, optimizing engine performance, and improving fuel consumption. Methods to resolve urea warning lights in vehicles include: 1. Replacing the urea solution; 2. Replacing the water heating valve; 3. Replacing the urea pump and power supply module connector.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.