How to fold down the third row of the Buick GL8?

1 Answers
DiConnor
07/30/25 2:33am
Buick GL8's third row seats are fully fixed and can only be folded down in the more common 60/40 split configuration. There is a pull ring under each side of the rear seats. Simply pull them by hand to fold down the respective rear seats.
Was this review help?
13
2
Share
More Forum Discussions

What kind of engine oil is suitable for Changan CS55?

Changan CS55's original engine oil model is SL-grade 5W-30 mineral oil. This oil is economical and reliable, having undergone precise matching and rigorous verification by the manufacturer, ensuring normal usage and engine longevity. Additionally, Shell brand engine oil is recommended for Changan CS55, with an oil fill quantity of approximately 4 liters. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, where 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in Changan CS55 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain; Use a special wrench to remove the oil filter; apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover. Generally, fill about three-quarters of a 4-liter oil container; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.
20
3
Share

Where to Repair a Broken Car Display Screen?

If it is within the warranty period, you can go to a 4S store for repair. If it is not within the warranty period, it is recommended to go to a professional place for repair, as the cost will be lower. The car central control screen mainly displays car audio, navigation, vehicle information, reversing images, etc., and there are single-touch LCD screens and multi-touch LCD screens. The following is an introduction to 4S stores: 1. Introduction to 4S stores: A 4S store, fully known as an automobile sales service 4S store, is a car sales enterprise that integrates vehicle sales, spare parts, after-sales service, and information feedback. 2. Services of 4S stores: The core competitiveness of a car 4S store is to win customers with high-quality services. At a car 4S store, consumers can get all value-added services regarding car information, market trends, after-sales service, maintenance instructions, spare parts supply, etc. Whether it is a complete vehicle or spare parts, the authenticity and quality are guaranteed, relieving consumers of worries about after-sales service, repair, and maintenance.
13
2
Share

How Often Should a Vehicle Be Inspected After Six Years?

After the six-year exemption period for motor vehicle inspections, vehicles over six years old must undergo an annual inspection. According to the relevant provisions of the "Regulations for the Implementation of the Road Traffic Safety Law": small and micro non-operational passenger vehicles are exempt from annual inspections for the first six years; vehicles over six years old must be inspected once a year; and vehicles over 15 years old must be inspected every six months. Below are important considerations for vehicles that fail to undergo inspection on time: 1. Accident Liability: For any traffic accidents caused by a vehicle that has not undergone its annual inspection on time, the responsible party will bear full or primary liability, and the insurance company will not be liable. This is because the insurance policy specifies that vehicles with expired inspections are among the excluded categories for claims. 2. Mandatory Scrapping: According to the "Regulations on the Compulsory Scrapping Standards for Motor Vehicles," if a motor vehicle fails to obtain an inspection compliance mark within three consecutive inspection cycles after the expiration of its inspection validity period, it will be subject to compulsory scrapping.
4
5
Share

Can Diesel Vehicles Enter the City?

Diesel vehicles that meet emission standards can enter the city, while those that do not meet the standards cannot. Diesel vehicles are classified into seven levels based on different emission levels, and the current emission standard has reached the China VI standard. Although new emission regulations have been implemented for diesel vehicles, they are primarily aimed at strictly regulating automakers to ensure that new products manufactured by them meet the China VI standard. For vehicles already sold, they can still comply with the emission standards at the time of sale. Below are the requirements of the China VI emission standard: 1. China VI Standard: The China VI standard is extremely high and is considered the most stringent motor vehicle emission standard globally. Compared to the China V emission regulations, China VI adds limits on nitrous oxide and particulate matter particle numbers, and requires a 50% reduction in carbon monoxide content during cold start conditions, a 30% reduction in hydrocarbon content, and a 30% reduction in carbon monoxide content. 2. China V Vehicles Can Still Be Driven After China VI Implementation: Even after the implementation of the China VI standard, China V vehicles can still be driven on the road, although registration and licensing may become more difficult. For those China V vehicles in stock, they will definitely be sold at discounted prices, and the closer it gets to the implementation date of China VI, the cheaper they will become.
14
5
Share

Does a Vehicle's Failed Inspection Affect the Transfer of Another Vehicle?

Vehicle inspection failure does not affect the transfer of another vehicle. A failed inspection can be rectified with a supplementary inspection, but penalties will be imposed. Failure to conduct a safety technical inspection within the specified period will result in a fine and a deduction of 3 points from the driver's license. For the annual inspection, bring the vehicle registration certificate, a copy of the compulsory traffic insurance policy, and ensure all traffic violations have been settled; the inspection can then be conducted at the local vehicle management office. Below are precautions for vehicles that have not undergone annual inspection: 1. Accident Liability: For any traffic accidents caused by a vehicle that has not undergone the annual inspection on time, the party involved will bear full or primary responsibility, and the insurance company will not be liable. This is because the insurance policy specifies that vehicles with expired inspections are among those not covered for claims. 2. Mandatory Scrapping: According to the 'Regulations on the Mandatory Scrapping Standards for Motor Vehicles,' if a vehicle fails to obtain a valid inspection certification mark for three consecutive inspection cycles after the expiration of its inspection validity period, it will be mandatorily scrapped.
5
3
Share

What are the reasons for the Dongfeng Lingzhi frequently experiencing sudden overheating?

The reasons for the Dongfeng Lingzhi frequently experiencing sudden overheating are as follows: Insufficient coolant: Insufficient engine coolant. Coolant leakage or a lack of coolant can cause the engine water temperature to rise. In this case, the coolant level should be checked. If it is insufficient, first add coolant to the appropriate level, then check the level again after a few days to see if it has dropped significantly. If it has, the source of the leakage should be identified. Component failure: Water pump failure, worn or loose drive belt. The thermostat main valve cannot open or opens too late. The louver cannot fully open. Dirty, damaged, or clogged radiator cooling fins or tubes. Scale buildup or blockage in the water jacket and distribution pipes. The fan clutch engages too late, or the cooling fan does not work, excessive resistance to fan rotation, incorrectly installed fan blades, damaged blades, etc.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.