···
Log in / Register

How to fold down the rear seats of the Roewe i5?

4 Answers
VonMaddox
07/23/25 11:52pm
Here are the steps to fold down the rear seats of the Roewe i5: 1. First, lift the seat cushion and move it forward; 2. Then, fold down the backrest. Below is more information about the Roewe i5: 1. The Roewe i5 is a compact car produced by SAIC Roewe, with body dimensions of 4601mm in length, 1818mm in width, and 1489mm in height, a wheelbase of 2680mm, a fuel tank capacity of 45 liters, a minimum trunk capacity of 512 liters, and a curb weight of 1185kg. 2. The Roewe i5 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 120, a maximum power of 88 kW at 6000 rpm, and a maximum torque of 150 Nm at 4500 rpm.
Was this review help?
13
2
Share
IsabelLee
08/10/25 7:31pm
Actually, I usually drive the Roewe i5, and folding down the rear seats is quite simple. First, locate the pull handle or button on the outer side of the seatback, usually near the bottom of the seat and often a black plastic piece. Gently pull the handle or press the button, and the seat will gradually tilt forward to form a flat surface. Before operating, make sure the car is parked on level ground to prevent accidents. Once folded, the space increases significantly, making it great for luggage or a quick nap. The first time I tried it, it took a bit of effort—don’t pull too hard to avoid damaging the latch. If it doesn’t move, check if the headrest is retracted or if the seatbelt is loose. I recommend trying it once to get used to it, and afterward, it’ll be a quick pull. I always use it for carrying stuff on weekends—it’s hassle-free and practical.
Was this review help?
10
5
Share
Expand All
OCaleb
09/23/25 8:09am
Folding down the rear seats of the Roewe i5 is not difficult, just follow the steps clearly. Locate the release handle on the outer side of the seat, positioned at the bottom of the backrest, and pull it firmly to fold the seat down. Once completed, it forms a flat space suitable for carrying supermarket shopping or camping gear. Remember to clear items from the seat in advance to avoid getting them caught. If there's no response, the headrest may not be adjusted low enough or the seat might be obstructed by something; gently move it and try again. After folding down, the cargo capacity doubles, making it super convenient for moving or taking pets out. Regular maintenance with simple lubrication of the handle can prevent rust. In short, finding the right spot makes it easy to handle.
Was this review help?
9
3
Share
Expand All
BrynleeMarie
11/07/25 3:37am
The Roewe i5's rear seats are easy to fold down. There's a pull ring or small lever under the outer seat - just grab and pull firmly to release. Make sure the car is parked securely before operating. Once folded, you'll have more space for packages or sleeping bags. If the seat gets stuck, try pushing the seatback or checking the headrest.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

How to Disconnect the Negative Terminal of a Car Battery?

Steps to disconnect the negative terminal of a car battery are as follows: 1. First, open the two fastening buttons of the thermal insulation cover, lift the red and black insulating caps on the positive and negative terminals, and locate the tightening nut of the battery's negative terminal. 2. Use a wrench to loosen the tightening nut of the negative terminal, then gently pry open the fastening block with a flat-head screwdriver. At this point, you can directly pull out the negative terminal. 3. Note: During removal, always follow the sequence of 'negative terminal first, then positive terminal' (the opposite of the installation sequence). If done in reverse, it may cause a short circuit in the car battery, and in severe cases, could lead to sparking.
17
1
Share

What is the Function of a Central Differential?

The function of a central differential is: when the car is turning or driving on uneven roads, it allows the left and right wheels to roll at different speeds, ensuring that both driving wheels perform pure rolling motion. The central differential refers to a component in multi-axle drive vehicles, where the drive axles are connected by drive shafts. To enable each drive axle to potentially have different input angular velocities and eliminate wheel slippage, a central differential can be installed between the drive axles. The main types of central differentials include conventional central differentials, multi-plate clutch central differentials, Torsen central differentials, and viscous coupling central differentials.
16
3
Share

What does the sun-like light on the Lavida tachometer indicate?

A sun-like light appearing on the tachometer indicates a bulb failure warning light. This warning light can illuminate when bulbs such as the brake light, inconspicuous license plate light, width marker light, or reverse light are damaged. While it does not prevent the car from continuing to operate, the issue should be addressed as soon as possible. The bulb failure warning light may illuminate for the following reasons: 1. There is a loose connection in the wiring, affecting the resistance value of the lighting circuit, causing the dashboard computer to mistakenly identify the bulb as faulty. 2. Poor wiring contact. 3. The bulb filament is partially broken. Solution: Park the car in a safe location, turn off the engine, use a wrench to remove the negative terminal of the battery, wait for 15 seconds, and then reconnect it. The warning light should disappear.
13
3
Share

What is the engine model of the Golf R?

The new Golf R is equipped with a turbocharged engine model EA882.0T, paired with a 6-speed dual-clutch transmission. Below is a detailed introduction to the Golf R engine: 1. This engine is currently one of Volkswagen's most popular engines, delivering a maximum horsepower of 300 hp. 2. The Golf R's 2.0-liter turbocharged engine has a maximum power output of 188 kW and a maximum torque of 330 Nm. The maximum engine speed is 6,000 rpm, while the maximum torque range is from 2,400 to 5,200 rpm. This engine features direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. 3. The EA888, in its low-power Gen3B version, adopts Miller cycle technology. Through a specially designed low-lift camshaft and VVT variable valve timing system, it achieves the Miller cycle with early valve closing, reducing pumping losses, improving thermal efficiency, and significantly lowering fuel consumption under daily driving conditions.
11
4
Share

How to Check the Oil Dipstick on a Haval M6?

The method to check the oil dipstick on a Haval M6 is as follows: The oil dipstick of the Haval M6 is usually located next to the engine. Make sure the vehicle is cooled down. After pulling out the dipstick for the first time, wipe it clean with a clean tissue, then reinsert it. Upon pulling it out the second time, you can check the oil level on the dipstick. If the oil level is between the upper and lower limits, it indicates that the oil level is normal. To check the oil dipstick, first pull it out, then wipe off any residual oil with a cloth before reinserting it into the oil pan. This is because, during normal engine operation, oil splashed by the crankshaft may adhere to the dipstick, which can mix with the oil in the oil pan and affect the accuracy of the oil level reading.
14
3
Share

What are the consequences of unplugging the throttle position sensor?

The consequence of unplugging the throttle position sensor is that it directly affects the performance and lifespan of the car. The throttle position sensor, also known as the throttle opening sensor or throttle switch, is typically a device used to detect the engine's condition. It determines whether the engine is in an idle working state or a composite working state. Essentially, the throttle position sensor is a variable resistor and several switches installed on the throttle body. When the throttle is in the idle position, the idle contact closes and sends an idle working state signal to the computer. When the throttle is in other positions, the idle contact opens, and the computer can identify the engine's load through the signals from the throttle position sensor. Based on these working state signals, the computer adjusts the engine's fuel injection amount to control gasoline usage.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.