How to Fold Down the Rear Seats of the Haval F7?

1 Answers
EdwardLynn
07/30/25 3:49am
Haval F7 rear seat folding method: To fold down the seat backs, lift the switches on both sides of the backrest respectively, then push forward while holding with your hands. After folding down the rear seats, the trunk gains more space, making it easier to load longer and larger items such as mattresses, golf bags, etc. The Haval F7 is the second model in Haval's F series, with body dimensions of 4620mm in length, 1846mm in width, and 1690mm in height. In terms of appearance, the Haval F7 features a hexagonal front grille design, equipped with eagle-eye-style LED headlights, combined with an exaggerated and dynamic front bumper, presenting a sharp and aggressive look.
Was this review help?
2
3
Share
More Forum Discussions

Can the Wildlander PHEV be driven without charging?

This is not a problem because this model is a hybrid vehicle, so even if it is not charged for a long time, the battery will be charged while driving. Introduction to Plug-in Hybrid Electric Vehicles (PHEVs): A plug-in hybrid electric vehicle is a type of new energy vehicle that falls between pure electric vehicles and traditional fuel-powered vehicles. It has both the conventional car's engine, transmission, drivetrain, fuel system, and fuel tank. Advantages of Plug-in Hybrid Electric Vehicles: Compared to non-plug-in hybrid vehicles, plug-in hybrid electric vehicles have a larger battery capacity, which supports longer driving ranges. If the vehicle is used primarily for short-distance trips and has good charging conditions, a plug-in hybrid electric vehicle can operate without refueling, functioning like a pure electric vehicle and offering the benefits of pure electric vehicles.
17
2
Share

Does Water on the Road Affect the Car?

Water on the road does affect the car. Here are the detailed explanations: 1. Driving through water: Many cars experience a significant decrease in braking performance after driving through water. This is because water enters the brake drums, reducing the friction coefficient. Therefore, after driving through water, you should not accelerate quickly. Instead, drive in a low gear for a while and intentionally apply the brakes lightly several times to use the heat generated by braking to quickly evaporate the water. 2. Precautions: When encountering a waterlogged section of the road, the driver should first assess the actual situation (depth of the water) to decide whether to proceed. If it's a familiar section and the driver is confident in the vehicle's ability to pass through, an attempt can be made.
6
1
Share

What is the speed range for manual transmission gears 1 to 5?

Generally, a manual transmission has 5 forward gears and 1 reverse gear. The timing for gear shifting depends on the engine speed and the vehicle's speed during driving. Below are the speed ranges for each gear: 1. 1st gear: This is the gear used for starting. When the vehicle reaches 10 km/h and the engine speed reaches 2000 rpm, you can shift to 2nd gear. 2. 2nd gear: When the vehicle speed reaches 20 km/h and the engine speed reaches 2000 rpm, you can shift to 3rd gear. 3. 3rd gear: When the vehicle speed reaches 40 km/h and the engine speed reaches 2000 rpm, you can shift to 4th gear. 4. 4th gear: When the vehicle speed reaches 60 km/h and the engine speed reaches 2000 rpm, you can shift to 5th gear.
20
1
Share

What is the reason for the jerking sensation when braking in the Volkswagen Touareg?

The reasons for the jerking sensation when braking in the Volkswagen Touareg are as follows: ABS system operation: It may be the ABS system working, causing the car to make such a sound. Check if the ABS light on the dashboard is on. If it is, visit a 4S shop to see if there is an issue with the bearing. Hard spots on the brake disc: This is just due to harder material at this spot during manufacturing. It's not a problem; it only means the brake pad wears more slowly at this point. Once it wears past this spot, the issue will be resolved. Worn-out brake pads: The sharp noise is caused by the warning indicator on the brake pads, which may indicate that the brake pads are worn out or that there is a foreign object in the brake pads.
5
4
Share

What is the diameter of a Prado tire in centimeters?

Tire specifications for the Prado are 265/65R17. Tire introduction: Tire types have international standard tire codes, expressed in millimeters for section width and aspect ratio percentage. This is followed by the tire type code, rim diameter (in inches), load index (permissible load mass code), and permissible speed code. For example, in 175/70R1477H, 175 represents a tire width of 175MM, 70 indicates the tire's aspect ratio is 70%, meaning the section height is 70% of the width, the rim diameter is 14 inches, the load index is 77, and the speed rating is H. Front and rear tires: Most sedans have the same specifications for front and rear tires. In a few high-performance special-purpose vehicles like sports cars and rear-wheel-drive models, front and rear tire specifications may differ. Generally, the larger the engine displacement, the larger the tire specifications, which directly affects the vehicle's comfort, aesthetics, and off-road performance.
2
4
Share

Does Shutting Off an Automatic Car in Neutral Gear Harm the Vehicle?

Shutting off an automatic car in neutral gear does not harm the vehicle. The engine can only be turned off in N (neutral) or P (park) gears; shutting off in D (drive) or R (reverse) gears can damage the transmission. Below is a detailed introduction to the car gears: 1. P Gear is the Park Gear: When the gear lever is in the P position, the transmission is in neutral, but the output shaft is mechanically locked. At this time, the car will stop in place even without pressing the brake. It is generally used when the car is parked for a long time. When shifting into P gear, the car must be completely stationary. Do not shift into P gear when the car is not fully stopped, and always engage the handbrake. When parking on a slope, engage the handbrake first before shifting into P gear. 2. R Gear is the Reverse Gear: When the gear lever is in the R position, the rotation direction of the transmission's output shaft is opposite to that of the engine, allowing the car to move backward. When shifting into R gear, the car must be completely stationary. Do not shift into R gear when the car is not fully stopped. 3. N Gear is the Neutral Gear: When the gear lever is in the N position, the gears inside the transmission are idling, and the clutch is not engaged, resulting in the least load on the transmission. N gear is generally used for short stops, such as waiting at a red light, and when the car is being towed, the transmission should also be in N gear. 4. D Gear is the Drive Gear: When the gear lever is in the D position, the gears inside the transmission automatically shift between the lowest and highest gears based on factors such as vehicle speed and throttle opening, according to the preset shifting pattern. In most cases, D gear can be used for driving.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.