How to Fold Down the Rear Seats of the Elantra?

1 Answers
SanCarmen
07/30/25 1:46am
The method to fold down the rear seats of the Elantra is as follows: 1. Move the front seats forward; 2. Fold up the rear seat armrest; 3. Store the rear seatbelt buckles properly; 4. Adjust the headrests to a lower position; 5. Pull the folding switch located at the shoulder of the rear seat. More details about the Elantra are as follows: 1. The Elantra is a compact car with body dimensions of 4510 mm in length, 1765 mm in width, and 1470 mm in height, a wheelbase of 2650 mm, and a fuel tank capacity of 50 liters. 2. The Elantra is equipped with a 1.6-liter naturally aspirated engine, delivering a maximum power of 90.2 kW and a maximum torque of 150.7 Nm. 3. It features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
Was this review help?
18
4
Share
More Forum Discussions

What is the displacement of the Roewe RX8?

The displacement of the Roewe RX8 is 2.0L, and it is equipped with a 2.0L turbocharged engine across all models. Taking the 2019 Roewe RX8 as an example, it belongs to the mid-to-large SUV category with body dimensions of: length 4923mm, width 1930mm, height 1840mm, a wheelbase of 2850mm, and a fuel tank capacity of 68L. The 2019 Roewe RX8 features a double-wishbone independent front suspension and a five-link solid axle rear suspension. It is powered by a 2.0L turbocharged engine with a maximum horsepower of 222PS, a maximum power of 163kW, and a maximum torque of 360Nm, paired with a 6-speed automatic transmission.
20
1
Share

What Causes Low Cylinder Pressure in BMW N46 Engine?

BMW N46 engine's low cylinder pressure is caused by increased combustion chamber volume, reduced air intake, and deteriorated sealing. Reduced air intake: The engine's air intake determines the amount of gas compression before the piston reaches top dead center at the end of the compression process, thereby determining the gas pressure. Causes of insufficient engine air intake include clogged air filters, incorrect valve opening height in variable valve lift systems, and misalignment between crankshaft and camshaft in valve timing. Increased combustion chamber volume: After prolonged use, excessive carbon deposits on piston surfaces may lead to excessively small compression ratios and increased combustion chamber volume. Deteriorated cylinder sealing: Poor cylinder sealing makes gas leakage more likely, similar to how engine oil leaks occur.
12
1
Share

What are the differences between the Vios FS and the Yaris L?

The differences between the Vios FS and the Yaris L lie in their body dimensions: the Vios FS measures 4440mm in length, 1700mm in width, and 1490mm in height; while the Yaris L measures 4160mm in length, 1700mm in width, and 1495mm in height. Both the Vios FS and Yaris L belong to the subcompact car category, with a wheelbase of 2550mm and a fuel tank capacity of 42 liters. Both models feature MacPherson strut front suspension and torsion beam rear suspension. They are equipped with a 1.5L naturally aspirated engine delivering a maximum horsepower of 112PS, maximum power of 89kW, and maximum torque of 139Nm, paired with an 8-speed continuously variable transmission.
9
2
Share

What are the reasons for no response when turning the car key to start the engine?

The reasons for no response when turning the car key to start the engine are: 1. Battery depletion; 2. Ignition system failure; 3. Insufficient fuel line low pressure; 4. Exhaust pipe blockage; 5. Overly rich or lean air-fuel mixture. The functions of a car key include: 1. Closing windows automatically after turning off the engine; 2. Conveniently locating the car in a parking lot; 3. Automatically opening the trunk; 4. Remote-controlled window opening. Types of car keys: mechanical keys, remote keys, touchscreen LCD keys, and smart wristband keys. Precautions for using car keys: 1. Do not place them together with electronic devices; 2. Avoid exposing the key to direct high-temperature environments; 3. Do not use batteries with different power levels.
13
1
Share

How to Open the Hood of a Mercedes-Benz C200?

To open the hood of a Mercedes-Benz C200, locate the hood release lever below the left side of the steering wheel and pull it to release the hood. The Mercedes-Benz C200L is a mid-size sedan produced by Beijing Benz, with body dimensions of 4783mm in length, 1810mm in width, and 1442mm in height, a wheelbase of 2920mm, and a fuel tank capacity of 66 liters. It features a 4-door, 5-seat sedan body structure. The Mercedes-Benz C200L is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 184PS and a maximum power output of 135kW at 5500 rpm. It is paired with a 9-speed automatic transmission.
16
3
Share

How to Check the Model Number of a Transmission?

The methods to check the model number of a transmission are: 1. Identification via transmission nameplate; 2. Identification via vehicle nameplate; 3. Identification via housing markings; 4. Identification via component characteristics; 5. Identification via transmission structural features; 6. Cross-referencing with vehicle model tables. The functions of a transmission are: to change the gear ratio and expand the range of torque and speed variations of the driving wheels, adapting to frequently changing driving conditions and allowing the engine to operate under favorable conditions. The maintenance methods for a transmission are: 1. Replace automatic transmission fluid every 12 months or 20,000 kilometers; 2. Avoid coasting in neutral; 3. Regularly check the fluid level; 4. Avoid skipping gears when upshifting; 5. Avoid forcing the transmission into neutral; 6. Do not shorten the idle warm-up time; 7. Avoid gear grinding when shifting; 8. Clean the transmission; 9. Perform regular maintenance on the automatic transmission.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.