How to fold down the rear seats of the Borgward BX5?

What is the working principle of a manual transmission breather valve?

According to the torque principle of leverage, the low-speed gear with the largest diameter and longest radius amplifies the engine torque to assist the vehicle in starting forward movement. Through the shift fork: When shifting gears, the input shaft changes, and through the transmission of the intermediate shaft, it is ultimately output to the differential via the output shaft. When the differential moves, the tires move as well. That is, by using the shift fork, the transmission ratio of the meshing gears is altered, thereby changing the driving torque. The speed of the gears is inversely proportional to the number of teeth—the more teeth a gear has, the slower its speed. By combining a series of large and small gears, different transmission ratios can be achieved. Transmission gear set: The transmission consists of various gears and shafts, with gears being the core component. All gears can collectively be referred to as the gear set. Typically, there are three shafts inside the transmission: the input shaft, the output shaft, and an intermediate shaft.

20

0

Share

Is it normal for the engine speed to be 1500 when starting the vehicle?

It is normal for the engine speed to be 1500 when starting the vehicle. High idle speed during cold starts is a common issue. During warm starts: The normal operating temperature of the engine is above 90 degrees. During a warm start, the temperature and lubrication are just right, allowing gasoline to fully evaporate and burn, resulting in strong engine performance. During cold starts: At this time, the engine temperature is relatively low, and gasoline cannot fully vaporize, leading to lower ignition efficiency. Therefore, the engine control unit automatically increases the fuel injection volume and raises the engine speed to ensure normal operation. However, since gasoline does not burn completely during this time, it can easily lead to wasted fuel and carbon buildup.

17

5

Share

How to reset the tire pressure on a Buick GL8?

Method to reset the tire pressure on a Buick GL8: 1. Before resetting the tire pressure monitoring, park the vehicle in a safe area or garage; 2. Start the Buick GL8, and the central control screen will light up. Click the button highlighted in the red box; 3. Find the "Tire" option highlighted in the red box on the central control screen and click to enter; 4. Click the "SET" button highlighted in the red box to proceed to the next step; 5. Click the "Confirm" button highlighted in the red box to proceed to the next step; 6. Wait for the "Tire Pressure Monitoring Initialization" to complete, and the tire pressure warning light will be reset. There are three common methods of tire pressure monitoring: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotational speed between the tires, the system monitors the tire pressure. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Introduction: This system combines the advantages of both the above systems. It is equipped with direct sensors in two diagonally opposite tires and an indirect system for all four wheels. Compared to a fully direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time pressure data for all four tires like a direct system.

19

0

Share

Is Using 95 Octane Gasoline Beneficial for Emissions During Annual Inspection?

During the annual inspection, if an engine designed for 92 octane gasoline is filled with 95 octane, the result will be incomplete fuel combustion, leading to unburned fuel being expelled as exhaust. In this scenario, the vehicle's emissions test will show excessive levels of hydrocarbons and particulate matter. Therefore, using 95 octane gasoline during the annual inspection is not beneficial for emissions. The differences between 92 and 95 octane gasoline are as follows: Different Anti-Knock Properties: The octane rating represents the fuel's anti-knock properties. A higher octane number indicates better anti-knock performance. Different Isooctane Content: 92 octane gasoline consists of 92% isooctane and 8% n-heptane, while 95 octane gasoline consists of 95% isooctane and 5% n-heptane. Different Prices: A tank of 95 octane gasoline is slightly more expensive than a tank of 92 octane gasoline.

18

5

Share

Should Spark Plugs Be Replaced After 20,000 Kilometers of Driving?

Generally speaking, spark plugs need to be replaced after a car has been driven for 20,000 kilometers. More relevant information is as follows: 1. It depends on the usage of the car. If the spark plugs are in good working condition, they do not need to be replaced. However, regular inspections are necessary during subsequent use. It is important to note that spark plugs made of different materials have varying service lives. If the car uses standard material spark plugs, it is recommended to replace them after 20,000 kilometers, as the condition of the spark plugs directly affects the car's acceleration performance and fuel consumption. 2. While driving, if you notice a lack of power in the car, it is necessary to check the condition of the spark plugs. A spark plug has a discharge electrode, and normally, the electrode gap should be between 1.0-1.2mm. If the gap is significantly larger, the spark plug may fail to discharge properly, leading to insufficient engine power. In such cases, the spark plugs should be replaced promptly. Prolonged use of worn-out spark plugs can cause excessive carbon buildup in the engine, which not only affects the car's power but also increases fuel consumption.

6

4

Share

Is a motorcycle with a seat height of 820mm suitable for a person who is 1.7 meters tall?

A motorcycle with a seat height of 820mm is not very suitable for a person who is 1.7 meters tall. Only the tips of the feet can touch the ground: For a motorcycle with a seat height of 820mm, a person who is 1.7 meters tall can at most touch the ground with the tips of their feet. It is almost impossible to have both feet flat on the ground. Generally, common motorcycles have a seat height of around 760mm, which allows a 1.7-meter-tall person to have both feet flat on the ground. Try it in the store if possible: Height and the bike's fit are not always standard. Some people may be shorter not necessarily because of shorter legs, but possibly due to a shorter torso or neck. Therefore, as long as the seat height is not excessively high, it is best to try it in the store. Sitting on the bike to test the fit is free, and the ideal scenario is to have both feet flat on the ground.

3

5

Share

How to fold down the rear seats of the Borgward BX5?

What is the working principle of a manual transmission breather valve?

Is it normal for the engine speed to be 1500 when starting the vehicle?

How to reset the tire pressure on a Buick GL8?

Is Using 95 Octane Gasoline Beneficial for Emissions During Annual Inspection?

Should Spark Plugs Be Replaced After 20,000 Kilometers of Driving?

Is a motorcycle with a seat height of 820mm suitable for a person who is 1.7 meters tall?

Is it possible to skip gears when shifting?

What procedures are required for buying a used car locally?

What are the abbreviations for license plates in various regions of Shandong?

Can a motorcycle license be used to drive a motorcycle?