How to fold down the rear seats of the Baojun 510?

1 Answers
AlessandraFitz
07/29/25 9:57pm
You can find pull straps on both sides of the rear seats. Pulling these straps allows you to adjust the seatback or fold it down completely. The specific steps to fold down the rear seats of the Baojun 510 are as follows: 1. First, use the handles on both sides of the rear seats to adjust the seat angle to the lowest position, then lift the seat cushion firmly to flatten it. 2. Before folding down the rear seats, ensure the vehicle is parked in a safe location and the parking brake is engaged. 3. Observe the two handles on either side of the rear seats, which allow you to adjust the seat angle. Simply pull the handles to adjust to your desired angle for comfort. 4. The Baojun 510's rear seatbacks offer multiple angle adjustments, making it easy to find the perfect position. When the seatback is adjusted to its rearmost angle, it allows for a semi-reclined position during long trips, taking full advantage of the spacious interior.
Was this review help?
10
1
Share
More Forum Discussions

What are the symptoms of a faulty idle motor?

The symptoms of a faulty idle motor are: the car sometimes fails to start, but at other times it may start, and after starting, it can drive normally when accelerating. When the car shifts to neutral after releasing the throttle, it may stall or have an excessively high idle speed (above 2,000 RPM), failing to return to the normal range of around 900 RPM. It may require pressing the throttle to start and move. More details are as follows: 1. Unstable idle speed, idle shaking, high engine RPM, and similar phenomena are all caused by a faulty idle motor. Since the idle motor is a small electric motor that controls idle speed by adjusting its position via electric current, it regulates the idle air flow. Consequently, the idle motor is highly susceptible to dirt from dust carried by the air entering the engine, which affects its precise control. Excessive dust entering the idle motor can cause it to jam or fail. 2. Symptoms of a jammed idle motor Due to excessive dust entering the idle motor, it may get stuck in a certain position and fail to rotate. This can lead to incorrect control of the engine idle speed, potentially causing excessively high idle RPM. Even after the engine warms up, the idle speed may remain around 900 to 1,000 RPM and fail to stabilize normally. If the idle motor is stuck in the closed position, it may prevent the normal intake of air during idle. 3. This may result in the engine stalling after startup due to an inability to maintain stable idle speed, or the idle speed may drop too low (around 500 RPM), causing severe engine shaking. Therefore, it is essential to regularly replace the air filter and avoid using excessively dirty air filters for extended periods. Otherwise, excessive dust entering the idle motor can lead to its failure.
11
2
Share

Does the Honda XRV have a 4WD version?

The Honda XRV is front-wheel drive only and does not have a four-wheel drive version. Here are the specific details about the Honda XRV: 1. The Honda XRV is positioned as a compact SUV. In July 2019, the 2019 Honda XRV was officially launched, available in both National V and National VI versions. 2. The 2019 Honda XRV measures 4328mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm. 3. The exterior design of the 2019 Honda XRV uses the family design language, making it look more youthful and stylish, aligning with the aesthetic preferences of younger consumers.
6
5
Share

What does a driver's license showing C1D mean?

C1 and D driver's licenses refer to a combined driver's license that permits driving both C1 and D class vehicles. The C1 class allows driving small cars, while the D class permits driving ordinary three-wheeled motorcycles. C1: Small cars, small automatic transmission cars, low-speed trucks, and three-wheeled cars. Small and micro passenger cars, light and micro trucks; light, small, and micro special-purpose vehicles; small passenger cars with seating capacity of 9 or fewer. D: Three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h, ordinary two-wheeled motorcycles, and mopeds. Application age: The application age for a D class license is 18 to 60 years old. The minimum age for a C1 class license is 18 years old, with no upper age limit.
13
3
Share

What are the reasons for the inability to adjust the power seat forward and backward?

Power seat forward and backward adjustment failure may be due to a damaged adjustment switch, burned-out adjustment motor, or circuit malfunction. Many cars are equipped with power-adjustable seats, which have internal electric adjustment mechanisms. If these mechanisms are damaged, the seat will not be adjustable. More details are as follows: 1. Generally, power seats have two common issues: one is the seat being completely unresponsive, and the other is the seat not being adjustable in a certain direction. 2. The inability to adjust the seat in a certain direction is mainly caused by motor damage or switch short circuits. First, check if the fuse is blown. If there is no issue with the fuse, inspect the wiring for faults, then check the power seat switch or the seat mechanism for problems, and finally, check if there are any broken wires.
3
5
Share

How to Shift a Serpentine Gear Selector?

Shifting a serpentine gear selector is not much different from a straight-line gear selector. The shifting method for a serpentine gear selector is as follows: 1. When turning off the engine or parking for a long time, shift to "P" and engage the handbrake. 2. For forward movement, shift to "D". For safety, you should press the brake when shifting into "D", then slowly release the brake after shifting. At this point, due to power output, the car will move forward slowly even without pressing the accelerator. Some models have "D3", "D2", "D1", "L", or "S" after "D", which limit the automatic transmission from shifting to higher gears. For example, "D3" means the transmission will only go up to 3rd gear, and "D2" and "D1" follow the same principle. These are generally used only during long downhill drives. 3. When the speed and RPM are not high, you can switch between "D" and "D3" without stopping. 4. For reverse, shift to "R". Similarly, you should press the brake when shifting into "R", and switching between "D" and "R" should only be done when the car is completely stopped to avoid damaging the transmission. 5. For neutral or short-term parking, shift to "N". Generally, "N" is just a transition between "D" and "R". For example, when waiting at a red light for less than half a minute, there's no need to shift to "N"; staying in "D" and pressing the brake is sufficient. For parking for one or two minutes, shift to "N" and engage the handbrake. For four or five minutes or longer, shift to "P" and turn off the engine.
19
5
Share

How to Reset the Tire Pressure Warning Light on a Sagitar?

The method to reset the tire pressure warning light on a Sagitar: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Tire pressure monitoring automatically checks the tire pressure in real-time while driving and alerts the driver in case of tire leaks or low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, which then displays the tire pressure data for each tire. The system automatically alerts the driver when the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of the two systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a four-wheel indirect system is also equipped. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data on the actual pressure in all four tires as a direct system can.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.