How to Fold Down the Rear Seats of BYD F3?

1 Answers
Castillo
07/29/25 9:26pm
To fold down the rear seats of the BYD F3, pull the button located next to the headrest of the rear seat, and the rear seats will fold down. In higher trim levels of the BYD F3, the rear seats can be folded down, while some lower trim models do not support this feature. Many sedans allow the rear seats to be folded down, creating an extended space with the trunk, which is useful for transporting longer items. The BYD F3's design philosophy draws on the successful experiences and models of Japanese and Korean car development. Its body dimensions are 4533mm in length, 1705mm in width, and 1490mm in height, with a wheelbase of 2600mm.
Was this review help?
20
4
Share
More Forum Discussions

Why was the Chery Arrizo GX discontinued?

Because Chery had completed its planned objectives at that time and needed to re-strategize its future flagship models. Following the trend of suffix naming, the GX was essentially the Arrizo 5 Plus, marking a return to the right path, with the 7 series waiting in the wings. Below is the relevant introduction: Background: SUVs were dominating the consumer market, and the Arrizo GX, which lacked platformization and lightweight design, occupied a portion of production capacity while generating too low a profit. Purpose: With the release of powertrain resources, Chery aimed to introduce a true successor to the Arrizo series. This required advance planning, waiting for the SUV series to complete its updates, and then launching a new sedan model.
17
1
Share

Can Water Replace Antifreeze?

Water cannot replace antifreeze for the following reasons: 1. The boiling point of antifreeze is above 120 degrees Celsius, while water boils at only 100 degrees Celsius; 2. Using water as a substitute for antifreeze can easily lead to scale formation; 3. Water causes corrosion in the cooling system, whereas antifreeze contains additives that prevent corrosion and rust. The method for replacing antifreeze is as follows: 1. Open the car hood after the engine has cooled down; 2. Remove the cap of the antifreeze reservoir; 3. Lift the vehicle and open the radiator drain plug, drain the old antifreeze, then reinstall the drain plug; 4. Lower the vehicle and pour new antifreeze into the reservoir.
17
3
Share

Where is the high beam relay located in a Chevrolet Cruze?

The high beam relay in a Chevrolet Cruze is located inside the engine compartment fuse box. A relay, also known as an electric relay, is an electronic control device that consists of a control system and a controlled system, commonly used in automatic control circuits. The Chevrolet Cruze is a compact car with the following body dimensions: length 4666 mm, width 1807 mm, height 1460 mm, wheelbase 2700 mm, and a fuel tank capacity of 52 liters. The Chevrolet Cruze is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 114 hp and a maximum power output of 84 kW, with a maximum power speed of 6600 rpm. It is paired with a 6-speed manual transmission.
20
3
Share

Will the 16-inch wheels interfere with the rear drum brakes on the new Santana?

The 16-inch wheels on the new Santana do not interfere with the rear drum brakes. Below is the relevant information for the 2021 Santana model: 1. Model: The new Santana and the new Jetta share the same platform, so their body dimensions and wheelbase are highly similar, with some parts even completely overlapping. 2. Body dimensions: The 2021 Santana has a body length of 4282mm, a wheelbase of 2603mm, and a width of 1706mm. The new Jetta is 14mm longer than the new Santana, which is the biggest difference in body dimensions between the two models, though this difference is hardly noticeable from the side view.
19
0
Share

Can You Drive with a Faulty Camshaft Position Sensor?

You cannot drive with a faulty camshaft position sensor. Symptoms of a faulty sensor include: 1. Difficulty accelerating; 2. Ignition failure and unstable idling; 3. Persistent engine warning light; 4. Sudden engine stall during warm operation. The camshaft position sensor is a sensing device, also known as a synchronization signal sensor. Since it can identify when a cylinder's piston is about to reach top dead center, it is also referred to as a cylinder identification sensor. The working principle of the camshaft position sensor is: 1. Collecting the position signal of the camshaft and transmitting it to the ECU; 2. The ECU identifies the top dead center of cylinder 1's compression stroke to perform sequential fuel injection control, ignition timing control, and knock control.
4
4
Share

How to Adjust the Rearview Mirror of Baojun 730?

The adjustment method for the Baojun 730 rearview mirror is as follows: 1. Turn the electric adjustment knob on the driver's side door panel handle to the left or right to select the side of the rearview mirror to be adjusted; 2. Move the adjustment lever to adjust the angle. The Baojun 730 is a 5-door, 7-seat MPV with body dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. The Baojun 730 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 108kW and a maximum torque of 250Nm. It features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.