How to fold down the rear seats of a Volvo S60?

1 Answers
ArianaRose
07/30/25 5:38am
Method to fold down the rear seats of a Volvo S60: Open the trunk, pull the handle labeled 'Release' backward, then open the rear door and fold down the rear seats. The Volvo S60 is a mid-size sedan under the Volvo brand, featuring a 4-door, 5-seat sedan body structure, a trunk capacity of 391 liters, and a minimum ground clearance of 147mm. In terms of power, taking the Volvo 2021 S60 T3 Momentum Luxury Edition as an example, it is equipped with a 2.0L inline 4-cylinder turbocharged engine, delivering a maximum power of 120kW and a maximum torque of 265Nm, paired with an 8-speed automatic transmission, and features front-wheel drive.
Was this review help?
9
0
Share
More Forum Discussions

What is the difference between car crystal coating and waxing?

The differences between crystal coating, film coating, and waxing are as follows: 1. First, there is a difference in price: waxing has the lowest cost, film coating is more expensive, and crystal coating is moderately priced. 2. There is also a difference in the duration of protection: waxing lasts the shortest, about 1 month; film coating lasts longer, around 6 months; while crystal coating lasts the longest, up to 1 year. Additional information: The primary function of waxing is waterproofing and protection against acid rain. Due to the protection of car wax, the amount of water droplets adhering to the car body is significantly reduced, with an effectiveness of 50% to 90%. It also protects against high temperatures and UV rays, prevents static electricity, and of course, dust. At the same time, it makes the car body look newer.
4
1
Share

Is Wheel Alignment Necessary After Tire Rotation?

Tire rotation generally requires a subsequent wheel alignment. It is essential to perform tire rotation in accordance with the vehicle maintenance schedule, especially after the initial break-in period of a new car, as it significantly impacts tire longevity. Therefore, timely tire rotation as specified by the vehicle manufacturer is crucial for extending tire lifespan. Here is more information about wheel alignment: 1. Purpose of Wheel Alignment: Wheel alignment adjusts the four wheels' parameters to ensure optimal driving performance and reliability. 2. Situations Requiring Wheel Alignment Include: (1) Before annual vehicle inspection. (2) When a new car reaches 3,000 kilometers. (3) Every six months or when the vehicle reaches 10,000 kilometers. (4) When replacing steering system components.
1
5
Share

Is the Purchase Tax Calculated Based on the Naked Car Price?

Whether the purchase tax is calculated based on the naked car price depends on the situation. 1. When the naked car price is lower than the minimum tax price in the national tax system, it is submitted according to the minimum tax price. 2. When the naked car price is higher than the minimum tax price in the national tax system, it is submitted according to the naked car price. Here is some extended information: 1. The calculation method for vehicle purchase tax is based on the "minimum tax price". 2. The legal basis is Article 9, Paragraph 5 of the "Vehicle Purchase Tax Collection and Management Measures": For vehicles for which the State Taxation Administration has not determined a minimum tax price, the tax price is the price indicated in the valid price proof provided by the taxpayer. If the price indicated in the valid price proof is significantly low, the competent tax authority has the right to determine the tax price of the taxable vehicle.
4
5
Share

Can you cross the yellow dotted line to overtake?

You can cross the yellow dotted line to overtake. For dotted lines, crossing or overtaking is allowed, but the prerequisite is to ensure safety. Relevant information is as follows: 1. Introduction: In principle, solid lines cannot be crossed, especially yellow solid lines. White solid lines are used to separate lanes, also known as guide lane lines. Vehicles are prohibited from changing lanes after entering the guide lane lines, and the yellow solid lines in the middle of the road must not be crossed or violated because they separate opposing lanes. Single yellow dotted lines are used to separate lanes. Under the premise of ensuring the safety of oncoming vehicles and yourself, it is allowed to cross the line for overtaking, turning, etc., and it is not a traffic violation. 2. Regulations: Article 47 of the "Regulations for the Implementation of the Road Traffic Safety Law" states: "When overtaking, motor vehicles shall turn on the left turn signal in advance, switch between high and low beams, or sound the horn. On roads without a center line or with only one motor vehicle lane in the same direction, when the vehicle in front receives an overtaking signal from the vehicle behind, it shall reduce speed and move to the right to give way if conditions permit."
4
5
Share

What is the parking sequence for an automatic transmission with an electronic handbrake?

When parking an automatic transmission vehicle, first press the brake to bring the car to a complete stop, then shift into P (Park) gear, and finally engage the handbrake before turning off the engine. Below is more relevant information: 1. Principle of P Gear: Generally speaking, starting and parking operations for automatic transmission vehicles are simpler than those for manual transmissions, as there is no need to press the clutch, making it easier for novice drivers to get started. However, when driving an automatic transmission vehicle, it is crucial to avoid using the left foot for braking and the right foot for the accelerator. Always drive using only one foot. 2. Precautions: Before getting into the vehicle, observe the surroundings to identify any potential hazards (such as children or obstacles in the path when reversing or moving forward). Before moving the vehicle, carefully check the surroundings through windows and mirrors, and start cautiously to develop good habits.
18
0
Share

Which Saves More Fuel: Recirculation or Fresh Air Mode?

Recirculation mode is more fuel-efficient than fresh air mode. Relevant information is as follows: 1. Fresh Air Mode: This mode draws air from outside the vehicle, directs it through the air conditioning system for heating or cooling, and then blows it out through the vents. Fresh air mode replenishes the cabin with outside air, improving interior air quality. However, if the external weather is extremely dry and hot, using fresh air mode requires the AC compressor to continuously operate to cool the hot outside air, which consumes additional fuel. 2. Recirculation Mode: This mode circulates the existing cabin air. The AC system draws in cabin air, cools it, and then recirculates it back into the cabin. Once the cabin temperature reaches the set value, the AC compressor disengages, reducing engine load. Therefore, the faster the cabin temperature reaches the set value, the sooner the engine load decreases, resulting in lower fuel consumption.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.