How to fold down the rear seats of a Volvo S60?

What is the actual fuel consumption of the Eado 1.6L?

Changan Eado 1.6L actual fuel consumption is approximately 6.57-7L. Below are the requirements and types of fuel consumption for the Changan Eado: Fuel consumption requirements for the Changan Eado: M1 category, M2 category with a maximum design total mass not exceeding 3.5t, and N1 category compressed natural gas vehicles; M1 category and N1 category vehicles with a maximum design total mass not exceeding 3.5t, tested according to the test methods specified in GB/T 12545.1-2008 "Test methods for fuel consumption of passenger cars". Types of fuel consumption for the Changan Eado: It belongs to the low fuel consumption type, but actual fuel consumption is related to multiple factors, so specific fuel consumption should be based on actual usage. For manual transmission models, fuel consumption can be controlled within the range of 6 liters. Fuel consumption will increase if it is too high or too low. For example, in urban traffic congestion, fuel consumption can exceed 9 liters. Additionally, for drivers who frequently drive manual transmission vehicles at high RPM and low gear, fuel consumption will also significantly increase.

20

3

Share

What does 'man' mean on a car?

The 'man' on a car represents the air conditioning recirculation mode, where 'man' stands for fixed internal recirculation mode. Setting the air conditioning to 'auto' means automatic recirculation switching. When the internal recirculation light is off, it indicates the external recirculation mode. If the air inside the car is stale, you can turn on the external recirculation function, as it helps with ventilation. Tips for using internal and external recirculation in cars: During traffic jams, it's generally advisable to use internal recirculation to prevent exhaust fumes from the vehicle ahead from being drawn into your car; When using air conditioning for cooling, especially after the car has been exposed to the sun, first use external recirculation to dissipate heat, then switch to internal recirculation to quickly lower the temperature inside the car. Once the temperature stabilizes at a comfortable level, you can occasionally switch to external recirculation for fresh air; For heating, wait until the car engine has warmed up before turning on the heater, using internal recirculation initially. This is because the heating system utilizes heat from the engine. Once the temperature reaches a suitable level, switch to external recirculation to exchange air between the inside and outside of the car; On rainy or foggy days, to prevent window fogging, simply lower the temperature, increase the fan speed, and press the front window defogging button.

6

5

Share

Is it necessary to install lane keeping?

It is necessary to install the lane keeping system. After installing the lane keeping system on a motor vehicle, as long as the vehicle is driving on a normal road, there will be a normal lane keeping system icon on the dashboard. Once the vehicle deviates from the original lane, an indicator light will illuminate on the dashboard. Here is additional information: 1. The role of lane keeping: The lane keeping system is used to help drivers keep the vehicle driving within a certain lane. The system uses a camera to identify the lane boundary lines. When the boundary lines of the vehicle's lane are identified, the lane keeping system will intervene. If the vehicle approaches the identified marking line and may leave the driving lane, it will alert the driver through steering wheel vibration or sound. 2. Introduction to lane keeping: The lane keeping assist system is one of the intelligent driving assistance systems. It can control the steering system based on the lane departure warning system to assist the vehicle in maintaining its lane.

10

5

Share

What engine does Changan Oushan Auto use?

Changan Oushan engines are independently produced by Changan Company, with their production base located in Chongqing, making them domestically manufactured engines. In the Changan Oushan series, the Oushan X7 is equipped with the JL476ZQCF engine model, delivering a maximum power of 131kW, maximum horsepower of 178, and maximum torque of 265Nm. The 1.5T version of the Oushan X5 features the Blue Whale NE1.5T engine, with a maximum power of 132KW, maximum torque of 300Nm, and maximum horsepower of 180. For daily maintenance of Changan Oushan engines, the following methods can be applied: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To prevent faults, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

5

3

Share

What brand is Longmarch tires?

Longmarch is Langma tires, which are produced by Liaoning Chaoyang Langma Tire Co., Ltd. The company was established in 2003 and is a professional manufacturer of all-steel radial tires for heavy loads. It owns tire brands such as "Roadlux", "New Horse", and "roadlux". Among them, Roadlux and Roadlux are local trademarks in Liaoning, while Longmarch is a domestic trademark. Chaoyang Langma Tire Co., Ltd. is located in Chaoyang City, Liaoning Province. It is a Chinese enterprise specializing in all-steel radial tires. The company's products have covered the whole country and are exported to more than 70 countries and regions across five continents, including the United States and Russia. They have long been directly supplied to large enterprises such as Dongfeng Motor Corporation, North Benz, and China Logistics. Langma tire maintenance methods: Increase awareness of tire safety and inspect tires more frequently. Regularly correct wheel balance. Unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Regularly rotate tires. To ensure even wear on all tires of the same vehicle, perform tire rotation every 5,000 kilometers. In daily use of Langma tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may seem minor but can be potential hazards for tire blowouts during high-speed driving. Additionally, immediately remove pebbles from the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, the driver should not turn the steering wheel, as this operation will accelerate tire wear. Do not splash water for cooling. In hot weather or during high-speed driving, tires are prone to overheating, and air pressure will increase. In this case, stop to dissipate heat. It is strictly forbidden to release air to reduce pressure or splash water to cool down, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and emergency braking to prevent accelerated tread wear due to dragging between the tires and the ground.

20

2

Share

Should the Older Model LaCrosse Use 92 or 95 Octane Gasoline?

According to the official vehicle manual recommendation, the older model LaCrosse should use 92 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual, you can also find it indicated on the fuel tank cap of the older model LaCrosse. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies nowadays, the gasoline grade cannot be solely determined by the compression ratio. Even engines with high compression ratios can be tuned to use lower octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the older model LaCrosse occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline by mistake will not cause damage, but the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced in real feedback. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane number is significantly lower, the reduced ignition point of the gasoline may cause premature ignition during the compression stroke. If combustion occurs before the spark plug ignites during the compression stroke, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If it's only mild knocking with increased noise, the damage to the engine is not significant. However, if noticeable knocking occurs, it indicates severe engine operating conditions. The vibrations not only affect driving stability but can also cause abnormal wear on the pistons and cylinders, and in severe cases, even cylinder scoring.

12

0

Share

How to fold down the rear seats of a Volvo S60?

What is the actual fuel consumption of the Eado 1.6L?

What does 'man' mean on a car?

Is it necessary to install lane keeping?

What engine does Changan Oushan Auto use?

What brand is Longmarch tires?

Should the Older Model LaCrosse Use 92 or 95 Octane Gasoline?

What are the consequences of forgetting to turn off the Volkswagen mirror heating?

Which Vehicle Has the Right of Way When Meeting on a Slope?

What are the dimensions of the Excelle?

Does a car key that got wet and stopped working need to be replaced?