How to Fold Down the Rear Seats of a Geely Emgrand?

2 Answers
LaElla
07/24/25 8:29pm
Method to fold down the rear seats of a Geely Emgrand: There are folding buttons installed on both sides of the rear seat backrests. Press the folding buttons to fold the seat backrests. To return the rear seat backrests: Flip the seat backrests backward and push them firmly backward to lock them into place. While the vehicle is in motion, passengers are not allowed to sit on folded seats or in the trunk; seats should be used normally. The dimensions of the Geely Emgrand are 4631mm in length, 1789mm in width, 1470mm in height, with a wheelbase of 2650mm. The 2013 Emgrand EC7 is equipped with 1.5L and 1.8L engines. The 1.5L model is paired with a 5-speed manual transmission, while the 1.8L model comes with either a 5-speed manual transmission or a CVT continuously variable transmission.
Was this review help?
13
1
Share
EmmanuelAnn
08/11/25 11:10am
I've been driving an Emgrand for three years, and folding down the rear seats is actually quite simple. Open the rear door, and near the door on both sides of the seat, you'll see a small black plastic latch. Press the latch with your thumb and lift it upwards, and the seatback will spring forward. If you want to fold the entire seat down, lift the latches on both sides simultaneously and push forward. For split-folding, lift the left latch to fold the left side, and the same applies to the right. Remember to remove the headrests before operating, or they might get stuck. This feature is super handy when loading bulky items—last time, I managed to fit two folding bicycles in there with no problem.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

What are the dimensions of the GAC Toyota Levin?

Taking the GAC Toyota Levin 2021 2.0L Luxury Edition as an example, its body dimensions are 4695 mm in length, 1780 mm in width, and 1435 mm in height, with a wheelbase of 2750 mm. The curb weight is 1390 kg, and the body structure is a 4-door, 5-seater sedan with front-wheel drive. In terms of power, it is equipped with a 2.0-liter naturally aspirated engine, delivering a maximum power of 126 kW and a maximum torque of 205 N·m, paired with a 10-speed continuously variable transmission. For the suspension system, the front suspension uses a MacPherson strut independent suspension, while the rear suspension employs an E-type multi-link independent suspension.
4
2
Share

What are the consequences of not deregistering a scrapped vehicle?

The impacts of not deregistering a scrapped vehicle are: 1. The previous license plate cannot be reused; 2. New vehicles cannot be registered under the name of the scrapped vehicle in the future; 3. If someone else continues to drive the vehicle and causes a traffic accident, they will bear corresponding responsibilities. Each vehicle has unique identifiers such as the VIN (Vehicle Identification Number) and engine number. Scrapped motor vehicles are completely dismantled by vehicle recycling centers. The VIN is a 17-digit alphanumeric code that serves as the vehicle's unique identifier, similar to an ID card. Each vehicle has its own unique VIN, which represents information such as the production region, manufacturer, and production year.
11
1
Share

What does the EPC light indicate?

The EPC indicator light has two illumination states: power-on self-test illumination and illumination under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the vehicle is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC light remains illuminated after the vehicle is started or does not turn off for a long time, the main causes for the EPC light staying on include faults in the engine intake system, throttle valve issues, fuel system malfunctions, engine problems, ECU control unit failures, and brake light faults. The following is a detailed introduction to the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt accumulation can affect intake, causing the indicator light to illuminate. Fuel system fault: Examples include substandard fuel, fuel deterioration, or poor fuel atomization. Engine fault: Insufficient engine pressure or problems with the intake valves and other powertrain components can also trigger the EPC light. ECU control unit fault: This may occur if the vehicle's computer signals are interfered with or if the computer generates false alerts. Brake light fault: Situations such as brake lights not working, brake switch failures, or brake circuit issues can cause the EPC light to illuminate. Solutions for when the EPC light illuminates: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle valve, etc. Remove carbon deposits from relevant components. Re-flash the ECU with updated data. If the EPC light illuminates, the owner can first try turning off the engine and restarting it to see if the EPC light remains on. If it does not illuminate again, there may be no issue, and the EPC light might have been affected temporarily. If the EPC light stays on or frequently illuminates, the vehicle should be taken to the nearest repair facility for professional diagnosis and timely resolution of potential safety hazards. The English full name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system will take predefined measures to address powertrain issues. Common EPC indicator lights typically display two colors: yellow and red. If the EPC fault light is yellow and the vehicle can still operate normally, proceed slowly to a repair facility for inspection. If the EPC fault light is red, the situation is more severe, and the driver should pull over immediately and contact a repair technician. Continuing to drive could directly affect the vehicle's core components or driving safety.
14
3
Share

What to Do When the Coolant Level Warning Light Comes On?

The solution for a coolant level warning is: you need to top up the antifreeze. If the water temperature reaches above the red line, it's best not to continue driving. If you can't add antifreeze immediately, consider stopping the car to lower the water temperature. If the water temperature is normal and only the antifreeze warning is on, you can continue driving, but monitor the water temperature during the drive and top up the antifreeze as soon as possible when conditions allow. The functions of automotive coolant include: 1. Preventing the car's radiator and engine block from cracking due to freezing in low-temperature environments; 2. Preventing corrosion in the cooling system; 3. Reducing scale formation during circulation; 4. Absorbing heat to keep the radiator from boiling under high temperatures.
20
1
Share

Is the first maintenance free if it exceeds three months?

Whether the first car maintenance is free after exceeding three months depends on the region. The maintenance periods vary among 4S stores in different regions. The maintenance cycle is usually three months or 5,000 kilometers. Some 4S stores may not provide free maintenance if the period exceeds three months, while others might still offer free maintenance even after exceeding three months. Below is a detailed introduction to the first car maintenance: First maintenance is provided free by 4S stores: The first maintenance regulation for cars is based on two indicators: time and mileage, whichever comes first. Exceeding either the time or mileage limit may affect the car's warranty. Regardless of the car brand, the first maintenance is provided free by 4S stores. Pay attention to the time limit for first maintenance: Some car 4S stores are very strict with the time limit. If the three-month period is exceeded, the car will be considered as automatically forfeiting the first maintenance. Without the first maintenance, if the car encounters any quality issues, the 4S store will not provide warranty services. Necessity of first maintenance: The reason new cars require first maintenance is that they go through a break-in period, during which certain wear and tear occur. During the first maintenance, the car undergoes a thorough inspection to check its various performances and ensure it is in proper running condition. Maintenance precautions: The most important aspect of maintenance is changing the engine oil. For naturally aspirated engines, it is recommended to use semi-synthetic oil, while turbocharged engines should use fully synthetic oil.
16
3
Share

Is the Qiaoge equipped with a purely imported engine?

Qiaoge is not equipped with a purely imported engine. The function of an engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to perform work. The main components of an engine include: the engine block, crankshaft and connecting rod mechanism, valve train and intake/exhaust system, fuel supply system and governor, starting device, cooling system, and lubrication system. Engine maintenance methods: 1. Use high-quality engine oil; 2. Use qualified coolant; 3. Regularly clean the radiator scale; 4. Regularly remove carbon deposits from the engine; 5. Replace the vehicle's air filter, oil filter, and fuel filter on time; 6. Check if the spark plugs are damaged.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.