How to Fold Down the Rear Seats of a Ford EcoSport?

2 Answers
FernandoRose
08/26/25 3:48am
Move the front seats forward, retract the rear seat armrest and the cup holder on the armrest, and stow the safety belt buckle of the middle rear seat. The seats will then automatically fold. There is a row of rear seat control buttons on the inner side of the trunk. Press these buttons to fold the rear seats. The rear seat folding switch is located on the side of the rear seats. Locate and pull it to complete the folding of the rear seats.
Was this review help?
13
1
Share
StGeorge
09/08/25 4:38am
Operating the rear seat folding in the Ford EcoSport is quite simple. Let me share the steps. First, sit on the rear seat, and you'll find a small pull strap or button at the top of the seatback. Gently pull it upward to release the locking mechanism. Then, hold the seatback and push it forward steadily until it lies completely flat. The whole process requires no tools and takes little time. I recommend clearing any items from the seat before operating to avoid tripping or scratching the interior. Once done, the trunk space increases significantly, which is especially convenient for transporting large luggage or camping gear, as I often do. If it gets stuck, don’t force it—it might be due to a misaligned pull strap or lock; just adjust it gently. This design greatly enhances the practicality of the Ford EcoSport, making it ideal for daily moves or trips. Every time I operate it, it goes smoothly.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How to Replace the Battery of a Tire Pressure Monitor?

It is necessary to remove the tire and then install the sensor on the wheel hub. After installation, vehicle dynamic balancing must be performed, which is generally done at a tire shop or repair shop. For external tire pressure monitors, simply replace the sensor on the tire's valve stem. The steps are simple and can be done by yourself.
11
4
Share

How to Modify Xenon Lights?

This modification method mainly uses original matching xenon headlights, which combine xenon light sources with specially designed light distribution lenses and reflectors. Choose a reasonable installation position to meet personalized needs.
7
5
Share

How to Register After Installing a Roof Rack on Your Car?

If you install a roof rack that can be easily removed, you can avoid the hassle of going through the procedures. Simply remove and restore it during the annual inspection, and reinstall it after the inspection is completed. The owner can directly go to the vehicle management office to apply for the change registration within 10 days after the modification.
15
4
Share

How to Turn Off the Trunk Light That Stays On When the Car Trunk Is Open?

First, check if the trunk is fully closed. If not, you can simply close the trunk again to resolve the issue. If the light remains on after the trunk is closed, it might be due to a faulty sensor switch. It is recommended to visit a professional repair shop for maintenance.
8
5
Share

How to Remove Car Interior Door Panel?

Use a flat-head screwdriver to pry open the lower trim panel of the door handle, starting from the middle and moving downward, then outward to pry open the front section of the rear door. After removing the lower trim panel of the handle, you will see two black 8mm hex bolts inside. Use a socket wrench to unscrew them. Unplug the power window switch connector. Use a flat-head screwdriver to pry open the decorative panel of the door handle from front to back. Remember to pull the door handle while removing it. Use your hands to slightly pry open a gap at the bottom of the interior door panel, then insert a pry tool to loosen and remove the panel one clip at a time.
17
0
Share

How to Check Tire Pressure on Nissan Tiida?

First, unscrew the valve cap of the tire. Note that you should twist it quickly when opening. Insert the measuring head of the tire pressure gauge onto the valve stem, ensuring even pressure when pressing it onto the valve. Compare the measured data from the tire pressure gauge with the manufacturer's specifications to see if it meets the standard. If the pressure is insufficient, inflate the tire promptly.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.