How to Fold Down the Rear Seats of a Chevrolet New Sail?

3 Answers
RiverFitz
09/03/25 2:21am
Method to fold down the rear seats of the Chevrolet New Sail: There is a thin strap on the side of the rear seats. Pull it to adjust the backrest angle forward or backward, and hold it to fold down the seat completely. Additional information about the Chevrolet New Sail: 1. The New Sail features a refreshed front fascia, including new headlights and fog lights, a new grille, a new front bumper, and a new golden Chevrolet logo, giving it a completely new look. 2. The 2003 Chevrolet New Sail S-RV measures 4097mm in length, which is 71mm longer than the previous Buick Sail S-RV, while maintaining the same width of 1608mm, height of 1448mm, and wheelbase of 2465mm.
Was this review help?
8
3
Share
BeckettFitz
09/15/25 4:09am
I've been driving my Chevrolet New Sail for several years, and folding down the rear seats is a simple operation but can be confusing for beginners. There are two small pull straps at the top rear of the seat back, usually black woven bands, which you can easily feel by reaching out. When operating, make sure the car is stationary, sit in the back seat, hold the seat steady with one hand, and pull the strap upward firmly with the other hand—the seat will fold forward smoothly. If it doesn't move, don't force it; first check if there's a small metal latch on the side of the seat back and press it to release. Once folded, the trunk space doubles, which I often use for carrying suitcases or pet crates—super practical. Note that the pull straps can accumulate dust or degrade over time, so clean them regularly with a damp cloth or spray some lubricant to keep them smooth. Avoid operating under direct sunlight in summer, as the plastic can soften and make pulling difficult. I use it weekly for moving stuff, and once you're used to it, it takes less than three seconds.
Was this review help?
11
5
Share
Expand All
JuliaFitz
10/29/25 4:48am
My trick for the Chevrolet New Sail is how incredibly easy it is to fold down the rear seats. First, locate the pull strap on the back of the seatback, usually fixed at the top, and give it a firm pull—the seat will automatically tilt forward and fold down. Before operating, ensure the car is parked on level ground and turned off, prioritizing safety to prevent any sliding hazards. If it doesn't budge, don't force it—there might be a hidden latch under the seat; press it gently and try again. When returning the seat, listen for the click to confirm it's securely locked, preventing accidents. After expanding the space, avoid overloading with heavy items to maintain driving balance. Occasionally apply grease or wax to the pull strap and latch to prevent rust and wear. It's a quick-to-master feature that boosts cargo efficiency—a thoughtful design for compact cars.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

How Long After Ordering a Car Can You Take Delivery?

Generally, you can take delivery of the car within one month after ordering. Here are the precautions to take when picking up the car: 1. Check all the vehicle documents: including the purchase invoice, certificate of conformity, vehicle consistency certificate, motor vehicle registration certificate, warranty certificate, vehicle user manual, and new car delivery confirmation form. If the 4S shop is responsible for licensing and insurance, you also need to obtain the original insurance policy, insurance invoice, compulsory traffic insurance invoice, vehicle and vessel tax invoice, purchase tax invoice, tax payment certificate, and compulsory traffic insurance label from the salesperson. 2. Inspect the vehicle: Exterior checks should include the paint, production date of the window glass, tires, trunk, and engine; interior checks should focus on car functions such as lights, windows, rearview mirrors, dashboard, air conditioning, etc.
5
5
Share

What is an EGR Valve?

EGR valve is an exhaust gas recirculation system, an exhaust purification device designed for nitrogen oxides (NOx), one of the harmful gases in engine emissions. Below is an introduction to the EGR system: 1. Function: The main component of the EGR system is the digital control EGR valve, which is installed on the right exhaust manifold. Its role is to independently and accurately control the amount of exhaust gas recirculated back to the engine, regardless of the manifold vacuum level. 2. Working Principle: The EGR valve controls the amount of exhaust gas flowing back from the exhaust manifold to the intake manifold through three metering holes of increasing diameters, creating various flow combinations. Each metering hole consists of a solenoid valve and a needle valve. When the solenoid valve is energized, the armature is magnetically pulled upward, opening the metering hole and the valve. The rotary needle valve ensures excellent sealing when the EGR valve is closed.
18
4
Share

What are the sighting techniques for driving on an S-curve?

Sighting techniques for driving on an S-curve are as follows: When the front part of the vehicle touches the right boundary line, you need to quickly steer to the left by half a turn, and vice versa for the opposite direction. During the test, if the front of the vehicle is about to go out of the boundary line, steer more to the left to allow the vehicle to pass through the S-curve normally. Relevant information is introduced as follows: The S-curve driving is a mandatory test item in the subject two of the motor vehicle driver's license examination. If you are not well-practiced in this item, you can practice several times until you master it before registering for the test. This will increase the chance of passing the test on the first attempt. If you fail on the day of the test, you can retake it once after other students have finished their tests. If you fail again, you will need to go back and continue practicing.
11
5
Share

What Happens If You Don't Surrender Your Old Driver's License When Adding a Driving Category?

Continuing to use the old driver's license without surrendering it when adding a driving category will result in a fine. Procedures after passing the additional driving test: After passing the additional driving test, the old license must be surrendered, and a new one will be issued. If the old license is not surrendered, it cannot be used anymore. Continued use is illegal and will incur a fine. Important notes after passing the additional driving test: You cannot drive between the time the old license is surrendered and the new one is issued. Relevant laws and regulations: According to Article 19 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' when applying to add a driving category, in addition to filling out the 'Motor Vehicle Driver's License Application Form' and submitting the proofs specified in Article 18, the current motor vehicle driver's license must also be submitted.
4
5
Share

How often should RAV4 tires be replaced?

RAV4 tires generally last 3-5 years, with a recommended maximum mileage of 60,000 kilometers. The lifespan of car tires is directly related to the driver's habits and driving conditions. Regular assessment of tire condition is necessary during daily use, and immediate replacement is required when tires become unsafe. Below are indicators for tire replacement: 1. Sidewall bulges: If bulges appear on the tire sidewalls, replace them immediately as these are difficult to repair. Bulges indicate broken cords inside the tire, which may lead to sudden blowouts during driving. 2. Tire cracks: Cracks of varying lengths and depths commonly appear during normal use. If unsure about tire condition, visit a 4S store or professional auto repair shop for inspection. Severe cracking may lead to bulges and potential blowouts. 3. Wear indicators: Tires feature wear markers showing the maximum allowable wear limit. When tread reaches these markers, replace tires immediately as they pose significant safety risks - even on dry roads, braking distance increases substantially, while wet roads may cause skidding or brake failure.
17
5
Share

How to Distinguish the Front and Back Sides of a Car Air Conditioning Filter?

Distinguishing the front and back sides of a car air conditioning filter can be done as follows: 1. Determine by the arrow direction on the car air conditioning filter: The arrow direction on the car air conditioning filter actually indicates the front and back sides of the filter. The direction the arrow points represents the airflow direction, which is also the installation direction. If the arrow points upward, that is the front side, which should face the airflow direction during installation. 2. Judge the front and back sides by observing the surface of the air filter: The ordinary fuzzy side is the front side, facing upward towards the airflow direction, while the side with a support line structure is the back side, facing away from the airflow direction. For filters containing activated carbon, the black side facing the airflow direction is the front side, and the white side facing away from the airflow direction is the back side.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.