How to Fold Down the Rear Seats in the Sylphy?

Is the Camry Produced by GAC Toyota or FAW Toyota?

The Camry is produced by GAC Toyota. Below is an introduction to the Toyota Camry: Body Dimensions: It is built on the new TNGA platform, with a body length of 4900mm, width of 1840mm, height of 1455mm, and a wheelbase of 2825mm. Powertrain: The Camry is equipped with three powertrain options: TNGA 2.5L HEV, TNGA 2.5L, and TNGA 2.0L. It offers a total of ten models across three series: Luxury, Sport, and Hybrid. Exterior Design: The Luxury version of the Camry features a trapezoidal horizontal grille design, with a streamlined body shape and a lower waistline. The extended rear roof enhances rear headroom.

14

5

Share

How to Determine When Brake Pads Need Replacement?

Light braking accompanied by a metallic scraping sound indicates that the brake pads have worn down to the point where the wear indicators are contacting the brake disc, signaling an immediate need for replacement. Additional details are as follows: 1. If the wear indicators on both sides of the brake pads are rubbing against the brake disc, it confirms that the brake pads have exceeded their service limit. When replacing brake pads, it's essential to inspect the brake discs as well. If the discs are damaged, they may also need replacement, especially in severe cases. If braking feels laborious, it suggests a loss of friction, necessitating immediate pad replacement. 2. New brake pads are approximately 1.5cm thick. With continuous use and friction, this thickness gradually decreases. Automotive professionals recommend that when visual inspection reveals the remaining thickness is down to one-third of the original (about 0.5cm), vehicle owners should increase self-inspection frequency and prepare for replacement.

19

2

Share

In which year were the National III emission standards implemented for vehicles?

The National III emission standards for vehicles were implemented on July 1, 2007. 1. The National III standard refers to China's third-stage vehicle emission standards. The National III emission standards are equivalent to European emission standards in terms of tailpipe pollutant levels, with the difference being that new vehicles must be equipped with OBD, the On-Board Diagnostics system. 2. The On-Board Diagnostics system features an increased number of detection points and detection systems, with oxygen sensors installed at both the inlet and outlet of the three-way catalytic converter. It ensures compliance with the standards through real-time monitoring of vehicle emissions, thereby better guaranteeing the enforcement of emission standards. 3. Compared to National II vehicles, National III vehicles are more fuel-efficient. For models around 5 tons, fuel consumption is reduced by approximately 1 liter per 100 kilometers, and for 10-ton models, the reduction is around 2 liters. However, this is only achievable under long-distance and stable driving conditions. For short-distance operations, the impact on fuel consumption is minimal.

12

4

Share

Why Do Trucks Need to Install BeiDou?

Trucks install BeiDou for the following reasons: According to relevant regulations, certain types of trucks must install the BeiDou satellite system. In addition to the most basic positioning and navigation functions, this device can also collect vehicle information, record vehicle driving trajectories, prevent drivers from speeding, fatigue driving, and other illegal behaviors, thereby reducing the occurrence of traffic accidents. Below is relevant information about installing BeiDou: 1. The BeiDou system can effectively record drivers' illegal driving behaviors such as speeding and fatigue driving: Preventing illegal behaviors and reducing the occurrence of traffic accidents. 2. Installing BeiDou can regulate traffic order: The BeiDou device can collect vehicle information and record vehicle driving trajectories to regulate traffic order. 3. BeiDou Satellite Positioning System: BeiDou is a regional navigation and positioning system established by China, consisting of four BeiDou positioning satellites (BeiDou-1) (two working satellites and two backup satellites), a ground control center as the main ground component, and BeiDou user terminals.

10

2

Share

What are the reasons for the inability to charge due to BMS failure in new energy vehicles?

Blown fuses, poor contact, poor plug contact, and battery end-of-life can all cause BMS failure in new energy vehicles, resulting in the inability to charge: Blown fuse: If the fuse inside the battery is blown, the only solution is to replace the internal fuse of the battery. Poor contact: Poor contact includes many aspects, such as poor contact between the fuse tube and the fuse seat, poor contact between the plug and socket, and poor contact between the charger and power source. These situations can affect the normal charging of the electric vehicle, leading to the battery not charging or not charging fully. Try reconnecting; if it still doesn't work, consider other reasons and address them promptly. Poor plug contact: Poor contact inside the battery is mainly due to connection issues between the positive and negative terminals. Try reconnecting or replacing the wires. If it still doesn't work, you may need to visit a 4S store for repairs. Battery end-of-life: The lifespan of a battery is about 5 years, but frequent incorrect charging methods can cause the battery to fail prematurely. The solution is to replace the battery.

13

1

Share

What Do Front Track and Rear Track Mean?

Front track refers to the distance between the center planes of the two front tires, while rear track refers to the distance between the center planes of the two rear tires. Detailed description of front track and rear track: 1. Generally speaking, a wider track provides better driving comfort, but some domestic cars without power steering may have a very 'heavy' steering wheel if the front track is too wide, affecting driving comfort. Additionally, track width also influences the overall width, total weight, lateral stability, and safety of the vehicle. 2. The difference between front track and rear track mainly manifests when the car takes a high-speed turn: the wider the front track, the smaller the moment of force causing body roll during the turn, as the outer front wheel bears more force. Therefore, the front track is usually wider than the rear track. If the rear track is wider than the front track, the benefit is increased stability during high-speed straight-line driving. 3. In daily driving, choosing a car with a wider front track and narrower rear track can ensure better maneuverability in urban areas, making it easier to turn around in the city. On the other hand, choosing a car with a narrower front track and wider rear track can enhance vehicle handling, providing stronger stability at high speeds, more precise steering, and greater agility in the front end.

1

3

Share

How to Fold Down the Rear Seats in the Sylphy?

Is the Camry Produced by GAC Toyota or FAW Toyota?

How to Determine When Brake Pads Need Replacement?

In which year were the National III emission standards implemented for vehicles?

Why Do Trucks Need to Install BeiDou?

What are the reasons for the inability to charge due to BMS failure in new energy vehicles?

What Do Front Track and Rear Track Mean?

What is the most suitable temperature for car air conditioning?

How to Turn On High Beam and Low Beam?

How long does it take for Beijing multi-vehicle transfer applications to be approved?

How Often Should Full Synthetic Engine Oil Be Changed?